Optical Transmission Properties of Si3N4 Add-Drop Micro-Ring Resonator Induced by a Fabry-Perot Resonance Effect

Xinyang Chen, Linpeng Gu, Peijian Huang, Xuetao Gan, Ning Wang, Yong Zhu, Jie Zhang2021 · DOI

TL;DR

This paper investigates and models the "miscellaneous peaks" observed in the transmission spectra of silicon nitride (Si3N4) add-drop micro-ring resonators (MRRs). They identify these spurious peaks as originating from a Fabry-Perot (F-P) cavity formed by the grating couplers and propose an anti-reflection coating as a solution to mitigate this effect, improving the accuracy of MRR-based devices.

What Problem Does This Paper Address?

Micro-ring resonators (MRRs) are crucial components in silicon photonics for applications like sensing and wavelength filtering due to their high quality factors and narrow bandwidths. However, in practical implementations, their transmission spectra often exhibit "miscellaneous peaks" – dense, disordered signals that obscure the true resonant peaks. This phenomenon significantly degrades the accuracy of wavelength selection, leading to errors in data analysis and device performance. While previous work has hinted at a Fabry-Perot (F-P) cavity effect as the cause, a detailed theoretical analysis and experimental verification were lacking. This paper aims to fill that gap by providing a comprehensive model and proposing a practical solution.

Methods

The authors develop an optical transmission model for Si3N4 add-drop MRRs that explicitly incorporates the Fabry-Perot (F-P) resonance effect. They combine coupled mode theory with a stationary interference method to analyze the signal propagation.

  • Modeling the MRR without F-P effect: They start by establishing the standard coupled mode theory equations for an add-drop MRR, defining the coupling resonance condition and deriving transmission matrices.
  • Introducing the F-P cavity: The core of their method is to model the F-P cavity formed by the two grating couplers. They consider multiple reflections between these couplers, treating the combined effect as an equivalent incident light source for the MRR. This involves calculating the total amplitude of the field at the MRR input due to these reflections.
  • Analyzing the F-P effect: They analyze how different interface reflectivities of the grating couplers influence the F-P cavity effect and the resulting spectral distortions.
  • Optimization: Based on the understanding of the F-P cavity, they propose an optimization scheme involving an anti-reflection (AR) film on the grating coupler interfaces. They derive the conditions for optimal AR coating and simulate its effect on the transmission spectrum.
  • Experimental Verification: The theoretical models are validated through experimental measurements using fabricated Si3N4 MRRs.

Datasets

Not discussed in the paper. The paper focuses on theoretical modeling and simulation, with experimental validation using fabricated devices.

Key Insights and Ideas

  • The "Miscellaneous Peaks" are a Fabry-Perot Cavity: The most significant insight is the definitive identification of the miscellaneous peaks as a direct consequence of a Fabry-Perot cavity formed by the reflections between the two grating couplers at the input and output of the MRR structure.
  • Grating Coupler Reflectivity is Key: The F-P cavity effect's severity is directly tied to the reflectivity of the grating couplers. Higher reflectivity leads to more pronounced F-P oscillations and can even make distinguishing MRR resonance peaks impossible.
  • F-P Cavity Distorts Wavelength Selection: The F-P cavity introduces a secondary interference pattern that overlays the MRR's intrinsic resonance, making accurate wavelength selection challenging and reducing the device's effectiveness for sensing or filtering.
  • Anti-Reflection Coating is an Effective Solution: By applying an anti-reflection film to the grating coupler interfaces, the reflectivity can be significantly reduced. This minimizes the F-P cavity effect, restoring the clarity of the MRR's resonance peaks and improving wavelength selection accuracy.
  • SiO2 as a Practical AR Material: The paper demonstrates that a commonly available material like SiO2 can be effectively used as an anti-reflection coating, making the proposed solution practical for fabrication.

Key Results

  • Theoretical Model: A comprehensive theoretical model was developed that accurately predicts the transmission spectra of Si3N4 add-drop MRRs, including the spurious F-P oscillations.
  • Experimental Validation: Experimental results from fabricated Si3N4 MRRs confirmed the presence of miscellaneous peaks, consistent with the theoretical predictions of the F-P cavity effect.
  • Impact of Reflectivity: Simulations showed that as grating coupler reflectivity increases from 0.14 to 0.7, the intensity error value (γ) due to the F-P effect increases significantly (from 27.07% to 87.61%), highlighting the importance of minimizing reflectivity.
  • AR Coating Effectiveness: With a 150 nm SiO2 anti-reflection film, the intensity error value at the resonance wavelength was reduced to 11.08%, demonstrating a substantial mitigation of the F-P cavity effect. The transmission spectrum was nearly unaffected by the F-P cavity.
  • Transmittance Improvement: The AR coating achieved a transmittance greater than 95% in the wavelength range of 0.448–0.911 µm.

Limitations and Future Work

  • Limitations:
    • The paper focuses on Si3N4 MRRs. While the principles are general, specific material properties and fabrication tolerances will influence the results for other materials.
  • The experimental resolution of the spectrometer used (0.4 nm) limited the detailed observation of the F-P effect, necessitating simulations with higher resolution.
  • The paper assumes ideal conditions for some calculations, such as ignoring absorption loss at the interface.
  • Future Work:
    • The authors suggest that this work can be extended to analyze and improve the optical transmission properties of other MRR-based structures.
  • Further experimental validation with higher resolution spectrometers and different AR coating materials could be explored.
  • Investigating the impact of fabrication imperfections on the F-P cavity effect and AR coating performance would be valuable.

Summary updated

BibTeX
@misc{chen2021optical,
  author = {Xinyang Chen and Linpeng Gu and Peijian Huang and Xuetao Gan and Ning Wang and Yong Zhu and Jie Zhang},
  title = {{Optical Transmission Properties of Si3N4 Add-Drop Micro-Ring Resonator Induced by a Fabry-Perot Resonance Effect}},
  year = {2021},
  doi = {10.3390/s21196370},
}
Figure