Optical phased array using single crystalline silicon high-contrast-gratings for beamsteering

Byungwook Yoo, Trevor Chan, Mischa Megens, Tong Sun, Weijian Yang, Yi Rao, David A. Horsley, Connie J. Chang-Hasnain, Ming C. WuProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2013 · DOI

TL;DR

This paper introduces a novel optical phased array using ultra-lightweight, high-reflectivity silicon gratings (HCGs) actuated by MEMS. This design achieves significantly faster beamsteering speeds (microseconds) compared to existing technologies, opening doors for applications like high-speed 3D imaging and optical communications.

What Problem Does This Paper Address?

Optical phased arrays are crucial for applications like 3D imaging, optical communications, and LIDAR, enabling rapid redirection of light beams without mechanical movement. However, current technologies face limitations: liquid crystal-based arrays are slow (tens of milliseconds), while MEMS arrays often rely on metal coatings that introduce thermal stress and warping, limiting performance and power handling. The authors aim to overcome these limitations by developing a faster, more robust optical phased array.

Methods

The core innovation is the use of High-Contrast Gratings (HCGs) fabricated from single-crystalline silicon (SCS) on a silicon-on-insulator (SOI) wafer. These HCGs act as mirrors with exceptionally high reflectivity (>99.9%) at 1550 nm without needing any reflective metal coatings. The array is an 8x8 grid of these HCG pixels, each suspended by four mechanical springs and actuated electrostatically. Applying a voltage between the HCG mirror and a ground plane pulls the mirror down, creating a phase shift in the reflected light. By controlling the phase shifts across the array, the light beam can be steered in two dimensions. The fabrication process is simplified to a single mask, contributing to high yield and low cost.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Ultra-lightweight HCG mirrors: The HCG design achieves high reflectivity with a single thin layer of silicon, making the mirrors incredibly light (140 pg for a 20x20 µm² mirror). This is a dramatic reduction compared to traditional multi-layer mirrors.
  • Elimination of metal coatings: The intrinsic high reflectivity of HCGs removes the need for metal coatings, thus eliminating issues like thermal stress-induced warping and absorption limitations. This allows for higher optical power handling and improved reliability.
  • Fast response time: The combination of lightweight mirrors and electrostatic actuation leads to a remarkably fast response time, measured in microseconds, which is orders of magnitude faster than liquid crystal arrays.
  • Simplified fabrication: A single-mask fabrication process for the HCG mirrors on SOI wafers contributes to high yield and low manufacturing cost.

Key Results

  • An 8x8 optical phased array was successfully fabricated using SCS HCG mirrors.
  • The HCG mirrors achieve >99.9% reflectivity at 1550 nm without reflective coatings.
  • The array offers a total field of view of ±10° × 10° with a beam width of 0.26°.
  • The designed response time is 2 µs, significantly faster than existing technologies.
  • A maximum phase shift of 1.7π was achieved at 20 V actuation voltage.

Limitations and Future Work

The authors acknowledge that further suppression of the zero-th order beam (unsteered light) can be achieved by increasing the fill-factor of the optical phased array. This could be accomplished by reducing anchor pad sizes, employing buried electrical lines, using additional photomasks, or utilizing different anchor materials like silicon nitride. The use of through-silicon vias (TSVs) is also suggested for addressing high fill-factor arrays. The paper also notes that the ultra-lightweight nature of these mirrors, combined with their high reflectivity and lack of thermal stress issues, makes them potentially suitable for high-power applications, suggesting this as a future direction.

Summary updated

Abstract

We present a single crystalline silicon optical phased array using high-contrast-gratings (HCG) for fast two dimensional beamforming and beamsteering at 0.5 MHz. Since there are various applications for beamforming and beamsteering such as 3D imaging, optical communications, and light detection and ranging (LIDAR), it is great interest to develop ultrafast optical phased arrays. However, the beamsteering speed of optical phased arrays using liquid crystal and electro-wetting are typically limited to tens of milliseconds. Optical phased arrays using micro-electro-mechanical systems (MEMS) technologies can operate in the submegahertz range, but generally require metal coatings. The metal coating unfortunately cause bending of mirrors due to thermally induced stress. The novel MEMS-based optical phased array presented here consists of electrostatically driven 8 × 8 HCG pixels fabricated on a silicon-on-insulator (SOI) wafer. The HCG mirror is designed to have 99.9% reflectivity at 1550 nm wavelength without any reflective coating. The size of the HCG mirror is 20 × 20 &mu;m<sup>2</sup> and the mass is only 140 pg, much lighter than traditional MEMS mirrors. Our 8 × 8 optical phased array has a total field of view of &plusmn;10&deg; × 10&deg; and a beam width of 2&deg;. The maximum phase shift regarding the actuation gap defined by a 2 &mu;m buried oxide layer of a SOI wafer is 1.7&pi; at 20 V.
BibTeX
@inproceedings{yoo2013optical,
  author = {Byungwook Yoo and Trevor Chan and Mischa Megens and Tong Sun and Weijian Yang and Yi Rao and David A. Horsley and Connie J. Chang-Hasnain and Ming C. Wu},
  title = {{Optical phased array using single crystalline silicon high-contrast-gratings for beamsteering}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2013},
  doi = {10.1117/12.2007193},
}
Figure