Abstract
Optical beam steering is a foundational technology for applications ranging from LiDAR and biomedical imaging to free-space optical communication (FSOC). As these fields evolve, there is an increasing demand for systems capable of steering multiple beams simultaneously to enhance throughput and bandwidth. This paper presents a scalable, chip-integrated multi-beam acousto-optic steering (mAOBS) array fabricated on a thin-film lithium niobate (TFLN) platform. By utilizing digitally synthesized multi-tone microwave signals to excite surface acoustic waves, the system achieves independent control of dozens of optical beams with nanosecond-scale switching speeds. We demonstrate the system's utility through a multi-input, multi-output (MIMO) communication link, achieving megabits-per-second data rates across multiple simultaneous channels.
Introduction
Modern optical systems increasingly require non-mechanical, high-speed methods for directing light. While single-beam steering is well-established, multi-beam steering remains a significant challenge. Traditional technologies like Spatial Light Modulators (SLMs) are limited by kilohertz-range refresh rates, while Optical Phased Arrays (OPAs) often suffer from high crosstalk and poor extinction ratios when attempting to manage multiple simultaneous apertures.
To overcome these limitations, we propose an integrated acousto-optic approach. By leveraging the strong photoelastic effect in thin-film lithium niobate, we can create a "moving mask" of acoustic waves that deflects light with high precision and speed. This method avoids the pixelation bottlenecks of OPAs and the mechanical inertia of mirrors, providing a path toward scalable, high-capacity optical interconnects.
Methodology and Design
The mAOBS system is built on a TFLN platform, chosen for its excellent optical and acoustic properties. The device architecture consists of several parallel steering channels, each controlled by an interdigital transducer (IDT).
Acousto-Optic Interaction
The core mechanism involves converting microwave signals into surface acoustic waves (SAWs) via the IDTs. These SAWs create a periodic refractive index change in the lithium niobate, effectively acting as a diffraction grating. By driving a single IDT with multiple microwave frequencies (tones) simultaneously, the device generates multiple optical beams at distinct angles.
Mode Engineering
To maximize the efficiency of the acousto-optic interaction, the team implemented a photonic circuit that converts the standard transverse electric waveguide mode (TE₀₀) into a higher-order mode (TE₀₁) before it enters the interaction region. Simulations indicated that the TE₀₁ mode interacts more strongly with the acoustic field, significantly boosting the deflection efficiency compared to fundamental mode designs.
Experimental Results
The experimental evaluation focused on beam capacity, switching speed, and communication performance.
Beam Capacity and Precision
The researchers demonstrated a 4x21 beam array, totaling 84 individually controllable beams across an 8°×8° field of view. The system exhibited a high on-off contrast of approximately 30 dB, ensuring minimal interference between active and inactive channels. Furthermore, the relationship between microwave power and optical intensity proved highly linear (0.42% standard deviation), a critical requirement for complex data encoding.
High-Speed Switching and Communication
The mAOBS system achieved a switching rise time of 116 nanoseconds, orders of magnitude faster than liquid-crystal-based solutions. This speed was leveraged in a MIMO communication demonstration:
- Single-Beam Performance: Using 64-QAM (Quadrature Amplitude Modulation), a single beam achieved a data rate of 6 Mbps.
- MIMO Transmission: Four beams were used to transmit four distinct images simultaneously, reaching an aggregate data rate of 8 Mbps.
- Crosstalk: Inter-beam crosstalk was maintained below -20 dB, allowing for clear signal separation at the receiver end.
Discussion and Future Outlook
While the current prototype demonstrates a significant leap in integrated beam steering, several areas for improvement remain. The peak steering efficiency of 3.3% must be increased for energy-sensitive applications like satellite-to-satellite links. Additionally, thermal management of the IDTs is a consideration for high-power operation; future iterations may require specialized passivation layers or vacuum packaging.
Despite these challenges, the mAOBS architecture is inherently scalable. The transition from a 4-channel system to one supporting hundreds of beams is feasible through standard nanofabrication techniques. This technology holds the potential to revolutionize high-throughput LiDAR for autonomous systems and enable decentralized, high-bandwidth communication networks for drone swarms and satellite constellations.
Summary updated