Open–closed switching of synthetic tubular pores

Yongju Kim, Jiheong Kang, Bowen Shen, Yanqiu Wang, Ying He, Myongsoo LeeNature Communications 2015 · DOI

Abstract

While encouraging progress has been made on switchable nanopores to mimic biological channels and pores, it remains a great challenge to realize long tubular pores with a dynamic open-closed motion. Here we report μm-long, dynamic tubular pores that undergo rapid switching between open and closed states in response to a thermal signal in water. The tubular walls consist of laterally associated primary fibrils stacked from disc-shaped molecules in which the discs readily tilt by means of thermally regulated dehydration of the oligoether chains placed on the wall surfaces. Notably, this pore switching mediates a controlled water-pumping catalytic action for the dehydrative cyclization of adenosine monophosphate to produce metabolically active cyclic adenosine monophosphate. We believe that our work may allow the creation of a variety of dynamic pore structures with complex functions arising from open-closed motion.

Introduction

In nature, protein pores—such as those found in the proteasome or microtubules—are dynamic machines that gate the passage of ions and molecules through conformational changes. Replicating this behavior in synthetic systems, particularly for micrometer-long tubular structures, has proven difficult. Most existing synthetic pores are rigid or exhibit only minor structural shifts. This research presents a synthetic system capable of a dramatic, reversible "open–closed" transition triggered by temperature, which can be harnessed to perform mechanical work, such as driving dehydration reactions in aqueous environments.

Molecular Design and Self-Assembly

The researchers developed a disc-shaped aromatic macrocycle as the primary building block. This molecule features a rigid aromatic core (cyclohexa-m-phenylene) functionalized with flexible, hydrophilic oligoether chains. In water, these amphiphilic discs stack into primary fibrils, which further associate laterally to form hollow, micrometer-long tubules.

Cryo-TEM image showing the self-assembled tubular structures in water.

High-resolution imaging, including Cryo-TEM and negative-stain TEM, confirmed the formation of these well-defined tubular structures. Atomic Force Microscopy (AFM) and Circular Dichroism (CD) spectroscopy were employed to characterize the structural dimensions and the induction of chirality during the switching process.

Mechanism of Thermal Switching

The "open-closed" gating is driven by the thermal response of the oligoether chains on the tubule surface. At room temperature, these chains are hydrated, maintaining an "open" pore state. Upon heating to approximately 40°C—the Lower Critical Solution Temperature (LCST) for these chains—they undergo dehydration and collapse into globular forms.

Schematic of the molecular tilting mechanism. The collapse of surface chains induces a cooperative tilt in the stacked aromatic discs, leading to pore closure.

This collapse creates steric crowding on the tubule wall. To alleviate this pressure, the stacked aromatic discs cooperatively tilt relative to the tubule's longitudinal axis. This collective motion causes the entire tubule to shrink in diameter, effectively closing the internal pore. Experimental data showed the external diameter shrinking from 9.0 nm to 6.1 nm, effectively closing the 1.8 nm internal channel.

Water-Pumping Catalysis and Results

The most significant application of this dynamic motion is its ability to act as a "water pump." As the pore closes, it physically expels water molecules through the semipermeable walls, creating a transient hydrophobic nanospace. This environment was utilized to facilitate the dehydrative cyclization of adenosine monophosphate (AMP) into cyclic AMP (cAMP). Since water is a byproduct of this reaction, its physical removal shifts the equilibrium toward the product, allowing a reaction that is typically unfavorable in bulk water to proceed.

The system achieved a cAMP production yield of approximately $1.065 \times 10^{-4}$% per cycle. While numerically small, it represents a successful proof-of-concept for using mechanical pore motion to drive chemical synthesis. The switching process was found to be rapid and fully reversible over multiple heating/cooling cycles.

Conclusion and Future Directions

This study demonstrates a robust method for creating dynamic synthetic pores that mimic biological gating. Future work will focus on optimizing the catalytic efficiency, developing triggers beyond temperature (such as light or pH), and incorporating molecular recognition sites to enable selective active transport within the tubular channels.

Summary updated

Abstract

While encouraging progress has been made on switchable nanopores to mimic biological channels and pores, it remains a great challenge to realize long tubular pores with a dynamic open-closed motion. Here we report μm-long, dynamic tubular pores that undergo rapid switching between open and closed states in response to a thermal signal in water. The tubular walls consist of laterally associated primary fibrils stacked from disc-shaped molecules in which the discs readily tilt by means of thermally regulated dehydration of the oligoether chains placed on the wall surfaces. Notably, this pore switching mediates a controlled water-pumping catalytic action for the dehydrative cyclization of adenosine monophosphate to produce metabolically active cyclic adenosine monophosphate. We believe that our work may allow the creation of a variety of dynamic pore structures with complex functions arising from open-closed motion.
BibTeX
@inproceedings{kim2015openclosed,
  author = {Yongju Kim and Jiheong Kang and Bowen Shen and Yanqiu Wang and Ying He and Myongsoo Lee},
  title = {{Open–closed switching of synthetic tubular pores}},
  booktitle = {Nature Communications},
  year = {2015},
  doi = {10.1038/ncomms9650},
}
Figure