One-step Synthesis of Black TiO2 Composite Coating on Glass by Pulsed Laser Spraying

Lixian Zhang, Liang Yanqin, Shaodan Wang, Lu Hong, Aifeng Liu, Qiang WeiJournal of Inorganic Materials 2018 · DOI

TL;DR

Researchers have developed a novel pulsed laser spraying technique to create a black TiO₂ composite coating in a single step. This method effectively loads black TiO₂ nanoparticles onto a quartz glass substrate, enhancing their absorption across the visible light spectrum and improving their photocatalytic efficiency for environmental applications.

What Problem Does This Paper Address?

Titanium dioxide (TiO₂) is a well-known photocatalyst, effective at breaking down organic pollutants under UV light. However, its efficiency is limited by the small portion of UV light in natural sunlight. To overcome this, researchers have explored creating "black TiO₂" by doping or hydrogenation, which narrows its bandgap and allows it to absorb visible light. A key challenge is effectively loading these black TiO₂ nanoparticles onto a substrate for practical applications, as they tend to aggregate and are difficult to recover. Existing methods often involve multiple steps for synthesis and loading. This paper addresses the need for a streamlined, one-step process to synthesize and load black TiO₂ nanoparticles, thereby improving their visible light utilization and photocatalytic performance.

Methods

The core of this research is the development of a pulsed laser spraying (PLS) technique. This method involves focusing a nanosecond pulsed Nd:YAG laser onto a target made of a mixture of anatase TiO₂ and 13X molecular sieve. The laser ablation creates a high-temperature plasma and molten droplets that are then deposited onto a quartz glass substrate.

Key aspects of the method include:

  • One-step synthesis and loading: The PLS process simultaneously synthesizes the black TiO₂ and deposits it as a composite coating with the molecular sieve.
  • Material transformation: During the PLS process, the 13X molecular sieve transforms into an amorphous structure due to rapid cooling. The anatase TiO₂ undergoes a phase transition to rutile TiO₂. Crucially, some Ti⁴⁺ ions are reduced to Ti³⁺ ions, which is responsible for the black color and narrowed bandgap.
  • Substrate: Quartz glass was used as the substrate for its transparency and inertness.
  • Characterization techniques: A comprehensive suite of characterization methods was employed, including:
  • Scanning Electron Microscopy (SEM) for surface morphology.
  • UV-Vis-NIR spectroscopy to measure optical absorption.
  • X-ray Diffraction (XRD) for phase structure analysis.
  • Transmission Electron Microscopy (TEM) for high-resolution imaging.
  • X-ray Photoelectron Spectroscopy (XPS) to determine chemical valence states.
  • Electron Spin Resonance (ESR) to confirm the presence of Ti³⁺.
  • Photocatalytic activity tests using Rhodamine B degradation under simulated sunlight and visible light.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel material, rather than training or evaluating on existing datasets.

Key Insights and Ideas

  • PLS as a versatile tool: The study demonstrates that pulsed laser spraying, typically used for thin-film deposition, can be adapted to create porous composite coatings with unique material transformations.
  • Simultaneous synthesis and loading: The ability to achieve both the formation of black TiO₂ and its effective loading onto a substrate in a single step is a significant advancement.
  • Ti³⁺ as the key to black TiO₂: The reduction of Ti⁴⁺ to Ti³⁺ is identified as the primary mechanism for creating black TiO₂ with enhanced visible light absorption. This is supported by both XPS and ESR data.
  • Porous structure benefits: The resulting porous, ball-like structure of the coating is beneficial for increasing surface area and improving contact with reactants, leading to better photocatalytic performance.

Key Results

  • Coating morphology: The composite coating consists of porous, spherical particles (2-5 μm) that are fused together, forming a dense layer approximately 100 μm thick after only 80 seconds of spraying.
  • Optical properties: The black composite coating exhibits strong absorption across the entire visible light spectrum, unlike the UV-only absorption of raw anatase TiO₂.
  • Structural transformation: The coating is primarily amorphous molecular sieve with embedded rutile TiO₂ nanocrystals.
  • Ti³⁺ content: XPS analysis revealed that approximately 12% of Ti⁴⁺ ions were reduced to Ti³⁺ ions in the composite coating.
  • Photocatalytic activity: The black TiO₂ composite coating demonstrated high photocatalytic efficiency, degrading over 95% of Rhodamine B under simulated sunlight within 30 minutes and over 70% under visible light within 60 minutes.

Limitations and Future Work

  • Limitations: The paper focuses on a specific substrate (quartz glass) and a particular molecular sieve (13X). The long-term stability and reusability of the coating were not extensively discussed. The precise mechanism of Ti³⁺ formation and its distribution within the rutile structure could be further investigated.
  • Future Work: The authors suggest that this technique could be applied to other substrates and molecular sieves. Further research could explore optimizing the laser parameters and target composition to control the Ti³⁺ concentration and further enhance photocatalytic efficiency. Investigating the coating's performance in real-world applications, such as water purification and air pollution control, would be a valuable next step.

Summary updated

BibTeX
@article{zhang2018one,
  author = {Lixian Zhang and Liang Yanqin and Shaodan Wang and Lu Hong and Aifeng Liu and Qiang Wei},
  title = {{One-step Synthesis of Black TiO<sub>2</sub> Composite Coating on Glass by Pulsed Laser Spraying}},
  journal = {Journal of Inorganic Materials},
  year = {2018},
  doi = {10.15541/jim20180163},
}
Figure