One-step implementation of nonadiabatic geometric fSim gate in superconducting circuits

M. -r. Yun, Zheng Shan, L. -l. Yan, Yu Su, Guihai Chen, Chen, G.arXiv 2024 · DOI · arXiv

TL;DR

Researchers have proposed a "one-step" method to implement the versatile fSim gate in superconducting circuits by combining two different types of geometric quantum computing. By executing the gate's components in parallel rather than sequence, the scheme cuts operation time in half and provides inherent robustness against control noise and environmental decoherence.

What Problem Does This Paper Address?

In the current "Noisy Intermediate-Scale Quantum" (NISQ) era, every nanosecond counts. To run useful algorithms before qubits lose their quantum state (decoherence), we need to minimize "circuit depth"—the number of sequential operations. The fSim (fermionic simulation) gate is a powerful tool because it combines two fundamental operations (an iSWAP and a Controlled-Phase gate) into one package, which is particularly useful for simulating chemistry and physics.

Standard implementations usually build the fSim gate in two separate steps. However, this takes more time, exposing the qubits to more noise. Furthermore, traditional "dynamical" gates are sensitive to tiny fluctuations in control pulses. While "geometric" gates are more robust because they depend on the global path of the evolution rather than its local details, they are often slower. This paper tackles the challenge of creating a fast, robust, one-step fSim gate.

Methods

The authors propose a parallel geometric scheme using Xmon qubits (a type of superconducting transmon). Their core innovation is the simultaneous use of two different geometric techniques:

  1. Nonadiabatic Holonomic Quantum Computation (NHQC): This is used to implement the Controlled-Phase (CP) part of the gate. It involves driving the system through a "double-excitation" manifold (states like $|11\rangle$, $|02\rangle$, and $|20\rangle$).
  2. Nonadiabatic Noncyclic Geometric Quantum Computation (NNGQC): This handles the iSWAP part by driving the "single-excitation" manifold ($|01\rangle$ and $|10\rangle$).

By carefully tuning the qubit frequencies and coupling strengths, they ensure these two processes happen at the same time. Crucially, by using noncyclic paths, they avoid the requirement that the system must return to its exact starting state, which significantly speeds up the operation compared to traditional holonomic gates. They also demonstrate that this can be achieved both through direct capacitive coupling and via a tunable coupler to reduce "frequency crowding" in larger chips.

Datasets

As a theoretical and computational study, this paper does not use external datasets. Instead, the authors evaluate their scheme using:

  • Numerical Simulations: They solve the Lindblad master equation, which models how the quantum system evolves while interacting with a noisy environment.
  • Fidelity Benchmarking: They calculate the "average gate fidelity" by testing the gate against 500 different random initial quantum states to ensure the performance is consistent regardless of the input.

Key Insights and Ideas

  • Parallelism is Efficiency: The "aha!" moment is the realization that the single-excitation and double-excitation manifolds can be manipulated independently and simultaneously. This allows the iSWAP and CP components to be "baked" into the same pulse sequence.
  • Geometric Robustness: Because the gate relies on geometric phases, it is naturally "immune" to certain types of pulse errors. If the control pulse is slightly too strong or weak, the global geometry of the path stays mostly the same, preserving the gate's accuracy.
  • Speed as a Shield: By reducing the gate time to roughly 12 ns (half the time of a composite gate), the qubits spend less time "exposed" to the environment, which is the most effective way to combat decoherence.

Key Results

  • High Fidelity: Numerical simulations show an average gate fidelity of 0.9998, outperforming conventional geometric methods.
  • Speedup: The one-step implementation takes roughly half the time of a composite nonadiabatic geometric fSim gate and one-third the time of a standard two-step fSim gate.
  • Noise Resistance: The gate maintains a fidelity above 0.93 even with a 20% fluctuation in coupling strength. It also showed superior robustness against qubit frequency drift compared to standard nonadiabatic holonomic gates.
  • Experimental Feasibility: The authors provide specific parameters (frequencies in the 4-6 GHz range, coupling at ~40 MHz) that are well within the capabilities of current superconducting hardware.

Limitations and Future Work

  • Experimental Realization: While the theory and simulations are robust, the scheme has not yet been implemented in a physical laboratory. Real-world crosstalk and wiring complexities could introduce challenges not fully captured in the model.
  • Three-Level Requirements: The scheme relies on using the third energy level ($|2\rangle$) of the transmon qubits. In many superconducting processors, the $|2\rangle$ state has a significantly shorter lifetime than the $|1\rangle$ state, which could limit the ultimate fidelity in practice.
  • Scaling: While the authors discuss using a tunable coupler to prevent "frequency crowding," demonstrating this one-step gate in a large-scale processor with many neighboring qubits remains a future milestone.

Summary updated

Abstract

Due to its significant application in reducing algorithm depth, fSim gates have attracted a lot of attention. However, during the implementation of quantum gates, fluctuations in control parameters and decoherence caused by the environment may lead to a decrease in the fidelity of the gate. Implementing the fSim gate that is robust to these factors in one step remains an unresolved issue. In this manuscript, we propose a one-step implementation of the nonadiabatic geometric fSim gate composed of a nonadiabatic holonomic controlled phase (CP) gate and a nonadiabatic noncyclic geometric iSWAP gate with parallel paths in a tunable superconducting circuit. Compared to the composite nonadiabatic geometric fSim gate composed of a nonadiabatic holonomic CP gate and a nonadiabatic geometric iSWAP gate, our scheme only takes half the time and demonstrates robustness to parameter fluctuations, as well as to environmental impacts. Moreover, the scheme does not require complex controls, making it very easy to implement in experiments, and can be achieved in various circuit structures. Our scheme may provide a promising path toward quantum computation and simulation.
BibTeX
@misc{yun2024one,
  author = {M. -R. Yun and Zheng Shan and L. -L. Yan and Yu Su and Guihai Chen and Chen, G.},
  title = {{One-step implementation of nonadiabatic geometric fSim gate in superconducting circuits}},
  year = {2024},
  eprint = {2401.02234},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2401.02234},
}
Figure