On tangent geometry and generalised continuum with defects

Van Hoi Nguyen, Guy Casale, Loïc Le MarrecMathematics and Mechanics of Solids 2021 · DOI

TL;DR

This paper introduces a novel geometric framework for modeling materials with microstructures and defects. By leveraging fiber bundle theory and Ehresmann connections, the authors develop a "scaled material model" that elegantly captures the interplay between macroscopic and microscopic material behaviors, offering a unified approach to understanding defect formation and evolution.

What Problem Does This Paper Address?

The behavior of materials at different scales is a fundamental challenge in mechanics. Traditional continuum mechanics often struggles to accurately represent phenomena arising from internal structures and defects, such as dislocations and disclinations. While various approaches exist, they often lack a unified geometrical foundation or struggle to handle large deformations and complex defect interactions. This paper aims to bridge this gap by providing a rigorous geometric framework that can simultaneously account for macroscopic material deformation and microscopic structural changes, including the emergence of defects.

Methods

The core of the paper lies in its application of fiber bundle theory to model microstructured continua. A material is represented as a fiber bundle $M$ over a base manifold $B$ (representing the macroscopic body). The fibers $M_p$ at each point $p \in B$ capture the microstructural details.

Key techniques include:

  • Solder Form: An isomorphism between the tangent bundle of the base manifold ($TB$) and the vertical tangent bundle of the material manifold ($V(M)$). This establishes a link between the macroscopic and microscopic descriptions.
  • Ehresmann Connection: This provides a way to define "horizontal" and "vertical" directions within the fiber bundle, allowing for the definition of parallel transport and the identification of microelements.
  • Scaled Material Model: A central concept where the transformation of the material is described by a fiber morphism (a smooth map between fiber bundles). This model explicitly incorporates both macroscopic deformation (via a map $\phi: B \to E^3$) and microscopic transformations (via a map $\Theta$). A scaling factor $\zeta$ is introduced to control the interplay between these two scales.
  • Induced Geometry: The connection and metric on the material manifold are induced from the Euclidean space through the fiber morphism. This allows for the calculation of geometric quantities like curvature, torsion, and non-metricity, which are interpreted as indicators of material defects.
  • Parallel and Rolling Transports: These are used to analyze the behavior of vectors and points under transformations, providing insights into defect propagation and material behavior.

Datasets

Not discussed in the paper. The paper focuses on theoretical development and numerical simulations based on defined transformations, rather than empirical datasets.

Key Insights and Ideas

  • Unified Geometric Framework: The paper provides a powerful and unified geometrical language (fiber bundles, Ehresmann connections) to describe complex material behaviors, including defects, that are often treated separately.
  • Defects as Geometric Quantities: Curvature, torsion, and non-metricity are directly linked to the presence and type of material defects, offering a precise geometric interpretation.
  • Scaled Material Model: The introduction of a scaling factor $\zeta$ provides a flexible way to model the coupling between macroscopic and microscopic material responses, allowing for the study of how microstructural changes influence macroscopic behavior and vice-versa.
  • Beyond Infinitesimal Analysis: The paper extends the analysis of defects from infinitesimal loops to finite paths, offering a more practical approach for understanding real-world material behavior.
  • Alternative to Multiplicative Decomposition: The proposed framework offers an alternative to traditional multiplicative decomposition of the deformation gradient ($F = F_e F_p$) by directly modeling the transformation of microelements.

Key Results

The paper develops a comprehensive mathematical framework for modeling microstructured materials with defects. Through various examples and numerical simulations, the authors demonstrate:

  • The ability to characterize different types of defects (dislocations, disclinations) through the induced geometric quantities (torsion, curvature, non-metricity).
  • The influence of the scaling factor $\zeta$ on the material response, showing how it can interpolate between purely macroscopic or microscopic behaviors.
  • The effectiveness of the "developing curve" as a tool to visualize and quantify the presence of defects, particularly curvature.
  • The framework's capacity to handle large transformations and complex defect distributions.

Limitations and Future Work

  • Kinematic Focus: The current model is primarily kinematic. Future work could extend it to incorporate energetic considerations and define equilibrium laws for defective materials.
  • Linearization: While the framework is general, obtaining explicit solutions often requires linearization. Exploring nonlinearizations could provide more accurate descriptions of certain phenomena.
  • Specific Material Models: The paper presents a general framework. Applying it to specific microstructured materials (e.g., nanomaterials) and exploring different forms of the solder form and connection would be valuable.
  • Multi-physical Problems: The authors suggest that the framework could reveal interesting physical interpretations for multi-physical problems, which warrants further investigation.
  • Time Evolution: Incorporating time into the model would allow for the study of dynamic defect evolution and material transformations.

Summary updated

Abstract

This paper introduces tools on fibre geometry towards the framework of mechanics of microstructured continuum. The material is modelled by an appropriate bundle for which the associated connection and metric are induced from the Euclidean space by a smooth transformation represented by a fibre morphism from the bundle to Euclidean space. Furthermore, the general kinematic structure of the theory includes macroscopic and microscopic fields in a multiscaled approach, including large transformation. Defects appear in this geometrical point of view by an induced curvature, torsion and non-metricity tensor in the induced geometry. Special attention is given to transport along a finite path in order to extend the standard infinitesimal analysis of torsion and curvature to a macroscopical point of view. Both theoretical and numerical analysis may be handled without additional difficulties. Accordingly, several examples of transformation involving the distribution of material defects are exhibited and analysed.
BibTeX
@inproceedings{nguyen2021tangent,
  author = {Van Hoi Nguyen and Guy Casale and Loïc Le Marrec},
  title = {{On tangent geometry and generalised continuum with defects}},
  booktitle = {Mathematics and Mechanics of Solids},
  year = {2021},
  doi = {10.1177/10812865211059222},
}
Figure