On Bandwidth Characteristics of Tuning Fork Micro-Gyroscope with Mechanically Coupled Sense Mode

Yunfang Ni, Hongsheng Li, Libin Huang, Xukai Ding, Haipeng Wang2014 · DOI

TL;DR

This paper investigates the bandwidth characteristics of tuning fork micro-gyroscopes with mechanically coupled sense modes, revealing how structural asymmetries can significantly impact performance. By developing theoretical models and conducting experimental verification, the authors provide crucial insights for designing more robust and accurate micro-gyroscopes.

What Problem Does This Paper Address?

Micro-gyroscopes are essential components in many applications, from automotive systems to consumer electronics. Tuning fork micro-gyroscopes, in particular, offer advantages like common-mode rejection. However, achieving optimal performance, especially in dynamic angular rate sensing, requires a well-defined bandwidth. This paper addresses the challenge of understanding and designing for the bandwidth of tuning fork micro-gyroscopes, specifically those with mechanically coupled sense modes. While the bandwidth of simpler single-mass gyroscopes is well-understood, the introduction of mechanical coupling in tuning fork designs, while beneficial for other performance metrics, complicates bandwidth analysis. The core problem is how structural asymmetries, inherent in micro-fabrication, affect the bandwidth and how to account for these effects in the design process.

Methods

The authors employ a multi-pronged approach:

  • Theoretical Modeling: They develop a theoretical framework to analyze the frequency response of tuning fork micro-gyroscopes with mechanically coupled sense modes. This involves deriving equations that relate the differential output signal to the input angular rate frequency, considering both ideal (symmetric) and non-ideal (asymmetric) conditions.
  • Modal Analysis: The study utilizes modal superposition methods to analyze the vibration response of the sense mode, considering the natural frequencies and modal vectors of the system.
  • Experimental Verification: Two micro-gyroscope prototypes (SG-1 and SG-2) were fabricated and tested using a virtual rate-table method to validate the theoretical models. This method simulates dynamic angular rate input to measure the gyroscope's output response across various frequencies.
  • Asymmetry Analysis: The paper specifically investigates the impact of three types of asymmetry: asymmetric drive amplitude, asymmetric sense mass, and asymmetric sense stiffness.

Datasets

Not discussed in the paper. The study relies on theoretical modeling and experimental measurements from fabricated prototypes.

Key Insights and Ideas

  • Ideal vs. Non-Ideal Behavior: Under ideal symmetric conditions, the bandwidth characteristics of a coupled-sense-mode tuning fork gyroscope are similar to a single-mass gyroscope. However, asymmetries introduce significant deviations.
  • In-Phase Mode Participation: In non-ideal scenarios, the in-phase vibration mode, which is typically less relevant for sensing, can participate in the anti-phase Coriolis force response, directly impacting bandwidth.
  • Asymmetry's Dual Peaks: Asymmetric sense mass and stiffness lead to two significant peak points in the amplitude-frequency response, corresponding to the differences between the drive frequency and the natural frequencies of the anti-phase and in-phase sense modes.
  • Design Recommendation: To ensure a stable and predictable bandwidth, it is recommended that the frequency difference between the drive frequency and the in-phase sense mode natural frequency (Δf₁) be larger than the difference between the drive frequency and the anti-phase sense mode natural frequency (Δf₂). This helps to avoid disturbing fluctuations within the useful bandwidth.
  • Fabrication Errors Matter: Fabrication-induced stiffness asymmetry is highlighted as a more severe issue than mass asymmetry in their designed gyroscopes, significantly influencing the bandwidth.

Key Results

  • The theoretical models developed accurately predict the input-output amplitude-frequency responses, as confirmed by experimental results from two prototypes (SG-1 and SG-2).
  • The study demonstrates that asymmetries in sense mass and stiffness can cause the gyroscope's 3-dB bandwidth to be dictated by the in-phase mode's frequency response, rather than solely the anti-phase mode as in ideal cases.
  • For prototype SG-1, where Δf₁ < Δf₂, large asymmetries led to a fluctuating response around Δf₁, potentially reducing the effective bandwidth.
  • Prototype SG-2, with a natural frequency configuration where Δf₁ > Δf₂, showed more stable bandwidth characteristics, validating the design recommendation.

Limitations and Future Work

  • Sensing Circuit Ignored: The paper explicitly states that the frequency response of the sensing circuits was ignored, focusing solely on the mechanical aspects. This is a limitation as the overall system bandwidth will also be influenced by the electronics.
  • High-Frequency Behavior: While the paper focuses on bandwidth relevant for dynamic sensing (typically lower frequencies), the analysis of high-frequency behavior and its implications are less detailed.
  • Further Study on Sensing Circuits: The authors mention that the frequency response of sensing circuits is undergoing further study, indicating a clear direction for future work.
  • Optimizing Asymmetry: While the paper identifies the impact of asymmetry, future work could explore methods to either minimize fabrication-induced asymmetry or strategically design it to achieve desired bandwidth characteristics.

Summary updated

BibTeX
@misc{ni2014bandwidth,
  author = {Yunfang Ni and Hongsheng Li and Libin Huang and Xukai Ding and Haipeng Wang},
  title = {{On Bandwidth Characteristics of Tuning Fork Micro-Gyroscope with Mechanically Coupled Sense Mode}},
  year = {2014},
  doi = {10.3390/s140713024},
}

Loading related content...

Figure