Oil Spill Segmentation in Ship-Borne Radar Images with an Improved Active Contour Model

Jin Xu, Haixia Wang, Can Cui, Peng Liu, Yang Zhao, Bo LiRemote 2019 · DOI

TL;DR

This paper introduces an improved Active Contour Model (ACM) for detecting oil spills in ship-borne radar images. By combining pre-processing techniques with a novel pixel area threshold parameter, the method achieves more accurate and efficient oil spill segmentation compared to existing approaches, offering a valuable tool for environmental monitoring and response.

What Problem Does This Paper Address?

Marine oil spills pose significant threats to ecosystems and economies. While remote sensing is crucial for monitoring these events, ship-borne radar offers a unique advantage for real-time detection during clean-up operations, especially in challenging weather conditions. However, ship-borne radar images are notoriously noisy and inhomogeneous, making accurate oil spill segmentation difficult. Existing methods often struggle with false positives, speckles, and the inherent variability of sea clutter, necessitating a more robust and efficient detection approach.

Methods

The core of this work is an improved Active Contour Model (ACM), specifically an enhancement of the Local Binary Fitting (LBF) model. The proposed method involves several key steps:

  • Pre-processing: A multi-stage pre-processing pipeline is applied to the raw ship-borne radar images. This includes:
  • Coordinate system transformation: Converting images from polar to a plane rectangular coordinate system for easier processing.
  • Laplace operator: Enhancing co-channel interference and bright spots.
  • Otsu thresholding: Extracting relevant pixels.
  • Mean filtering: Smoothing noise.
  • Median filtering: Removing speckles and other non-wave objects.
  • Grey Intensity Correcting Matrix (GICM): Rectifying images to compensate for the decrease in echo intensity with distance.
  • Improved Active Contour Model (ACM): The enhanced LBF model incorporates a pixel area threshold parameter to refine segmentation. This parameter helps to remove false positive targets and speckles by considering the continuous pixel area of potential oil spill regions. The model uses this parameter to optimize preliminary recognition results and improve the accuracy of the final contour.

Datasets

The experimental data consisted of 68 primary ship-borne radar images acquired during the clean-up mission of the Dalian "7-16" oil spill accident on July 21, 2010. These images were captured by the teach-training ship "Yukun" of Dalian Maritime University. The paper also references thermal infrared images for verification purposes.

Key Insights and Ideas

  • Ship-borne radar as a vital tool: The paper highlights the under-explored potential of ship-borne radar for real-time oil spill monitoring, especially during critical clean-up phases.
  • The challenge of sea clutter: The inherent inhomogeneity and noise in ship-borne radar images are significant hurdles for accurate segmentation.
  • Multi-stage pre-processing is crucial: A comprehensive pre-processing pipeline is essential to prepare the radar images for effective segmentation.
  • Pixel area thresholding for refinement: Introducing a pixel area threshold parameter to ACMs is a novel approach to filter out false positives and speckles, leading to more reliable oil spill detection.
  • LBF model's suitability: The LBF model, with its ability to handle intensity inhomogeneities, serves as a strong foundation for this improved segmentation method.

Key Results

The proposed method demonstrated superior performance compared to other automatic and semi-automatic oil film detection techniques.

  • Improved Accuracy: The method achieved more accurate oil film area estimations, as evidenced by comparisons in Table 2 and Figure 15. For instance, Figure 12c showed a pixel area of 1413, translating to an oil film area of 10,399.7 m², while other methods produced smaller, potentially incomplete, areas.
  • Enhanced Robustness: The improved LBF model with the pixel area threshold parameter was more robust in identifying oil spills and less prone to false positives.
  • Faster Calculation Speed: The paper claims the improved method offers a fast calculation speed, particularly for uniform ship-borne radar sea clutter images, contributing to its efficiency for real-time applications.
  • Comparison with other ACMs: When compared to LBF, LGIF, and LIF models, the proposed method (an enhanced LBF) showed better visual interpretation results and a faster calculation speed than LGIF.
  • Comparison with other methods: The proposed method outperformed methods by Zhu et al., Liu et al., and Xu et al. in terms of segmentation accuracy and efficiency, as shown in Table 5 and Figure 22.

Limitations and Future Work

  • Sea Condition Dependency: Ship-borne radar monitoring is still highly dependent on sea conditions. Extremely rough seas can prevent operations, while very calm seas can lead to insufficient wave echoes, making oil spill detection difficult (as illustrated in Figure 18).
  • Image Resolution: The accuracy of oil spill identification is directly affected by image resolution. Each pixel represents a fixed area (7.36 m² in this study), meaning a single pixel identified as oil film implies the entire area is covered, which might not always be precise.
  • Perfect Smoothing: The paper acknowledges that achieving perfect smoothing of highly uneven images remains a challenge for whole oil film analysis.
  • Future Work: The authors suggest that further breakthroughs in remote sensing sensors and image generation technology are needed to improve recognition accuracy. The proposed method also provides data samples for deep learning methods for oil film recognition, indicating a potential future research direction.

Summary updated

Abstract

Oil spills cause serious damage to marine ecosystems and environments. The application of ship-borne radars to monitor oil spill emergencies and rescue operations has shown promise, but has not been well-studied. This paper presents an improved Active Contour Model (ACM) for oil film detection in ship-borne radar images using pixel area threshold parameters. After applying a pre-processing scheme with a Laplace operator, an Otsu threshold, and mean and median filtering, the shape and area of the oil film can be calculated rapidly. Compared with other ACMs, the improved Local Binary Fitting (LBF) model is robust and has a fast calculation speed for uniform ship-borne radar sea clutter images. The proposed method achieves better results and higher operation efficiency than other automatic and semi-automatic methods for oil film detection in ship-borne radar images. Furthermore, it provides a scientific basis to assess pollution scope and estimate the necessary cleaning materials during oil spills.
BibTeX
@inproceedings{xu2019oil,
  author = {Jin Xu and Haixia Wang and Can Cui and Peng Liu and Yang Zhao and Bo Li},
  title = {{Oil Spill Segmentation in Ship-Borne Radar Images with an Improved Active Contour Model}},
  booktitle = {Remote},
  year = {2019},
  doi = {10.3390/rs11141698},
}

Loading related content...

Figure