Octet lattice-based plate for elastic wave control

Giulia Aguzzi, Konstantinos Kanellopoulos, Richard Wiltshaw, Richard V. Craster, Eleni Chatzi, Andrea ColombiScientific 2022 · DOI

Abstract

Motivated by the importance of lattice structures in multiple fields, we numerically investigate the propagation of flexural waves in a thin reticulated plate augmented with two classes of metastructures for wave mitigation and guiding, namely metabarriers and metalenses. The cellular architecture of this plate invokes the well-known octet topology, while the metadevices rely on novel customized octets either comprising spherical masses added to the midpoint of their struts or variable node thickness. We numerically determine the dispersion curves of a doubly-periodic array of octets, which produce a broad bandgap whose underlying physics is elucidated and leveraged as a design paradigm, allowing the construction of a metabarrier effective for inhibiting the transmission of waves. More sophisticated effects emerge upon parametric analyses of the added masses and node thickness, leading to graded designs that spatially filter waves through an enlarged bandgap via rainbow trapping. Additionally, Luneburg and Maxwell metalenses are realized using the spatial modulation of the tuning parameters and numerically tested. Wavefronts impinging on these structures are progressively curved within the inhomogeneous media and steered toward a focal point. Our results yield new perspectives for the use of octet-like lattices, paving the way for promising applications in vibration isolation and energy focusing.

Introduction

Engineers have long favored lattice structures for their exceptional strength-to-weight ratios. However, controlling the propagation of elastic waves (vibrations) through these complex geometries remains a significant challenge. Traditional wave-blocking methods, such as Bragg scattering, often require lattice cells to be prohibitively large to address low-frequency vibrations.

This research explores a "single-phase" metamaterial approach, demonstrating that the standard octet lattice can be transformed into a sophisticated wave-control device through simple geometric modifications. By adding small masses or adjusting joint thickness, researchers have designed "metabarriers" that block a wide range of vibrations and "metalenses" capable of focusing wave energy, offering new solutions for vibration isolation and energy harvesting.

Methodology and Design

The study utilized a combination of theoretical modeling and numerical simulations to analyze wave behavior. The researchers employed Bloch analysis via COMSOL Multiphysics to calculate dispersion curves, identifying the specific frequency ranges (bandgaps) where waves are inhibited.

The octet lattice plate simulation setup (b) and the fundamental unit cell (a) used for dispersion analysis.

To validate these findings in a realistic scenario, time-transient simulations were performed using the Real-ESSI simulator on a finite plate consisting of 120x40 cells. The plate was subjected to a "sweep source"—a signal covering a range of frequencies—to observe real-time wave interaction with the proposed metastructures.

Geometric Customization

Two novel tuning parameters were introduced to manipulate the lattice's dynamic response:

  1. Added Masses: Small spherical beads placed at the midpoints of the lattice struts.
  2. Node Thickness: Variations in the thickness of the joints (nodes) where the struts meet.
Detailed view of the octet lattice modified with added spherical masses (m) to create local resonances.

Key Insights and Results

The Single-Phase Advantage and Local Resonance

The study discovered that the struts of the octet lattice naturally behave like clamped beams. When these struts vibrate at their resonant frequency, they "trap" incoming waves. In the octet geometry, this local resonance conveniently coincides with Bragg scattering frequencies, resulting in a robust and broad bandgap. A standard octet lattice was found to naturally block waves between 3.85 and 5.08 kHz.

Rainbow Trapping and Metabarriers

By "grading" the added masses—making them progressively heavier across the plate—the researchers achieved a "rainbow trapping" effect. This graded metabarrier effectively tripled the width of the blocked frequency range (1.14 to 5.1 kHz) and reduced wave amplitude by approximately 87%.

Wave Steering via Metalenses

By mapping the relationship between tuning parameters and wave speed, the authors designed refractive index profiles for Luneburg and Maxwell metalenses. The Luneburg lens, designed to focus parallel waves, successfully doubled the vibration intensity at its focal point compared to a plain plate, highlighting its potential for energy harvesting applications.

Discussion and Future Outlook

While these numerical results are promising, the study identifies several areas for future exploration. The current modeling relies on Euler-Bernoulli beam theory; while efficient, full 3D solid models would provide higher accuracy. Additionally, thinning the nodes to tune the lattice could introduce structural vulnerabilities that must be addressed in practical engineering designs.

The next critical step is experimental validation. By 3D-printing these customized octet designs and subjecting them to physical vibration tests, researchers can confirm the real-world efficacy of these single-phase metamaterials for advanced vibration isolation and energy focusing.

Summary updated

Abstract

Motivated by the importance of lattice structures in multiple fields, we numerically investigate the propagation of flexural waves in a thin reticulated plate augmented with two classes of metastructures for wave mitigation and guiding, namely metabarriers and metalenses. The cellular architecture of this plate invokes the well-known octet topology, while the metadevices rely on novel customized octets either comprising spherical masses added to the midpoint of their struts or variable node thickness. We numerically determine the dispersion curves of a doubly-periodic array of octets, which produce a broad bandgap whose underlying physics is elucidated and leveraged as a design paradigm, allowing the construction of a metabarrier effective for inhibiting the transmission of waves. More sophisticated effects emerge upon parametric analyses of the added masses and node thickness, leading to graded designs that spatially filter waves through an enlarged bandgap via rainbow trapping. Additionally, Luneburg and Maxwell metalenses are realized using the spatial modulation of the tuning parameters and numerically tested. Wavefronts impinging on these structures are progressively curved within the inhomogeneous media and steered toward a focal point. Our results yield new perspectives for the use of octet-like lattices, paving the way for promising applications in vibration isolation and energy focusing.
BibTeX
@inproceedings{aguzzi2022octet,
  author = {Giulia Aguzzi and Konstantinos Kanellopoulos and Richard Wiltshaw and Richard V. Craster and Eleni Chatzi and Andrea Colombi},
  title = {{Octet lattice-based plate for elastic wave control}},
  booktitle = {Scientific},
  year = {2022},
  doi = {10.1038/s41598-022-04900-0},
}
Figure