Observation of ‘hidden’ planar defects in boron carbide nanowires and identification of their orientations

Zhe Guan, Baobao Cao, Yang Yang, Youfei Jiang, Deyu Li, Terry T. XuNanoscale 2014 · DOI

TL;DR

This paper reveals that planar defects in boron carbide nanowires are often "hidden" and invisible in standard TEM imaging due to specific crystallographic orientations. The researchers developed a novel method to identify these hidden defects and their orientations even when they are not directly visible, crucial for understanding and controlling the properties of these important nanostructures.

What Problem Does This Paper Address?

The properties of nanostructures are intimately linked to their atomic structure, and planar defects like stacking faults and twins can significantly influence mechanical, electrical, thermal, and optical characteristics. Boron carbide (B4C) nanowires are of particular interest for applications in nanocomposites and thermoelectric devices. However, characterizing these nanowires using Transmission Electron Microscopy (TEM) presents a challenge: planar defects within B4C nanowires, which have a complex rhombohedral crystal structure, can be surprisingly difficult to observe. Standard TEM analysis often fails to reveal these defects, leading to potentially misleading conclusions about the "defect-free" nature of some nanowires. This invisibility stems from the specific crystallographic orientations required for these defects to be visible, which are not always achieved when nanowires are randomly dispersed on TEM grids. The paper aims to address this by providing a reliable method to identify these "hidden" defects and their orientations, even when they are not directly observable.

Methods

The study employs Transmission Electron Microscopy (TEM) as the primary characterization technique. A key aspect of their methodology is the extensive use of wide-angle tilting during TEM examination. This allows researchers to view the nanowires from multiple crystallographic orientations, increasing the chances of observing planar defects.

To overcome the limitations of direct observation, the researchers developed a novel approach for identifying fault orientations from "off-zone" TEM results. This method relies on:

  • Geometrical analysis: Comparing the projected preferred growth direction of a nanowire with specific diffraction spots observed in TEM diffraction patterns.
  • Simulations: Using software like CrystalMaker® and SingleCrystal™ to simulate the expected diffraction patterns and the relationship between the nanowire's growth direction and diffraction spots for both transverse faults (TF) and axial faults (AF) under various off-zone viewing conditions.

This simulation-based approach allows for the prediction of fault orientation without the need for the often tedious and challenging repositioning and re-examination of nanowires to achieve the "in-zone" condition.

Datasets

Not discussed in the paper. The study focuses on experimental characterization of synthesized boron carbide nanowires and computational simulations.

Key Insights and Ideas

  • "Hidden" Defects are Pervasive: The study strongly suggests that planar defects are not rare exceptions but are likely present in all as-synthesized boron carbide nanowires, even those that appear defect-free under initial TEM examination.
  • Orientation is Key to Visibility: The invisibility of planar defects is directly linked to the viewing direction in TEM. Defects are only clearly visible when the viewing direction is aligned with specific crystallographic planes (the "(001)-type" planes) and along certain low-index zone axes within those planes (the "in-zone" directions).
  • The Challenge of Random Orientation: Boron carbide nanowires, when randomly dispersed on TEM grids, rarely present the ideal "in-zone" orientations required for direct observation of planar defects.
  • A New Diagnostic Tool: The developed simulation-based approach provides a powerful way to determine fault orientation (TF vs. AF) from off-zone TEM data, circumventing the need for difficult repositioning and re-examination. This is a significant advancement for researchers working with these materials.
  • Structure-Property Linkage: Understanding the precise nature and orientation of planar defects is essential for establishing reliable structure-property relationships, which is critical for tailoring the performance of boron carbide nanostructures.

Key Results

  • High Defect Prevalence: Approximately 75% of previously examined boron carbide nanowires showed planar defects. The current study's findings suggest that the remaining 25% that appeared defect-free were likely due to unfavorable viewing orientations, and further investigation revealed defects in all examined nanowires.
  • Successful Simulation-Based Identification: The paper demonstrates that the developed geometrical analysis and simulation approach can accurately predict the fault orientation (TF or AF) of boron carbide nanowires based on off-zone TEM data. Experimental validation, particularly for AF cases, confirmed the accuracy of the simulated results.
  • Experimental Validation: The study provides experimental evidence (e.g., Figure 5 and Figure 6) that supports the simulated cases, showing how nanowires that appear defect-free in off-zone conditions can be correctly identified as TF or AF using the new method.

Limitations and Future Work

  • Focus on Straight Portions: The current study primarily analyzes long, straight portions of boron carbide nanowires. The authors acknowledge that kinked portions of nanowires might exhibit new phenomena that require further investigation.
  • Extension to Other Nanostructures: While the discussion is focused on boron carbide, the authors suggest that the developed approach for identifying fault orientation from off-zone conditions could be extended to other 1D nanostructures with different crystal structures.
  • Practical Implications: The findings highlight the need for researchers to be extremely cautious when concluding that a nanowire is "planar defect-free" based on limited TEM observations. The new method offers a way to avoid tedious experimental procedures and establish more reliable structure-property relationships.

Summary updated

Abstract

The physical properties of nanostructures strongly depend on their structures, and planar defects in particular could significantly affect the behavior of the nanowires. In this work, planar defects (twins or stacking faults) in boron carbide nanowires are extensively studied by transmission electron microscopy (TEM). Results show that these defects can easily be invisible, i.e., no presence of characteristic defect features like modulated contrast in high-resolution TEM images and streaks in diffraction patterns. The simplified reason of this invisibility is that the viewing direction during TEM examination is not parallel to the (001)-type planar defects. Due to the unique rhombohedral structure of boron carbide, planar defects are only distinctive when the viewing direction is along the axial or short diagonal directions ([100], [010], or 1¯10) within the (001) plane (in-zone condition). However, in most cases, these three characteristic directions are not parallel to the viewing direction when boron carbide nanowires are randomly dispersed on TEM grids. To identify fault orientations (transverse faults or axial faults) of those nanowires whose planar defects are not revealed by TEM, a new approach is developed based on the geometrical analysis between the projected preferred growth direction of a nanowire and specific diffraction spots from diffraction patterns recorded along the axial or short diagonal directions out of the (001) plane (off-zone condition). The approach greatly alleviates tedious TEM examination of the nanowire and helps to establish the reliable structure-property relations. Our study calls attention to researchers to be extremely careful when studying nanowires with potential planar defects by TEM. Understanding the true nature of planar defects is essential in tuning the properties of these nanostructures through manipulating their structures.
BibTeX
@inproceedings{guan2014observation,
  author = {Zhe Guan and Baobao Cao and Yang Yang and Youfei Jiang and Deyu Li and Terry T. Xu},
  title = {{Observation of ‘hidden’ planar defects in boron carbide nanowires and identification of their orientations}},
  booktitle = {Nanoscale},
  year = {2014},
  doi = {10.1186/1556-276x-9-30},
}
Figure