O-Modified Activated Carbon Fiber Electrode Efficiently Adsorption of Cu (II) in Wastewater

Zibo Xiao, Xinkun Zhao, Junjie Gu, Zhe Hu, Hongkai Fan, Qingfeng ChenSustainability 2023 · DOI

TL;DR

This paper introduces an O-modified activated carbon fiber (O-ACF) electrode that demonstrates highly efficient electro-adsorption of copper ions (Cu(II)) from wastewater. The O-ACF material achieves a remarkable maximum adsorption capacity of 48.60 mg/g, significantly outperforming commercial activated carbon, and maintains excellent performance even after multiple regeneration cycles.

What Problem Does This Paper Address?

Industrial wastewater, particularly from sectors like mining, printing, dyeing, and metal smelting, often contains high concentrations of heavy metal ions, with copper (Cu(II)) being a significant pollutant. Copper contamination poses serious risks to aquatic ecosystems and human health, impacting metabolism, cognitive abilities, and even leading to fatalities in severe cases. While various removal methods exist, there's a continuous need for efficient, cost-effective, and practical materials and technologies to extract or fix these harmful ions from wastewater. This study aims to address this by developing and evaluating a novel electro-adsorption material for copper removal.

Methods

The core of this research involves the preparation and testing of an O-modified activated carbon fiber (O-ACF) electrode.

  • O-ACF Preparation: Commercially available activated carbon fiber (ACF) was treated with 20% nitric acid (HNO₃) for oxidation modification. This process aims to introduce oxygen-containing functional groups onto the ACF surface, enhancing its adsorption capabilities. The modified ACF was then washed and dried to produce the O-ACF electrode material.
  • Electro-Adsorption Experiments: The O-ACF was used as an electrode in an electro-adsorption setup. The study systematically investigated the influence of key parameters on Cu(II) removal, including:
  • Solution pH: Tested across a range of 2–10.
  • Initial Cu(II) Concentration: Evaluated from 20 to 300 mg/L.
  • Applied Voltage: Varied between 0.6 and 1.2 V.
  • Electrode Plate Spacing: Adjusted from 5 to 20 mm.
  • Kinetic and Mechanistic Modeling: To understand the adsorption process, the researchers fitted the experimental data to:
  • Pseudo-first-order and Pseudo-second-order kinetic models: To determine the rate-limiting steps and the nature of adsorption (physical vs. chemical).
  • Intraparticle diffusion model: To differentiate between external mass transfer and internal diffusion mechanisms.
  • Regeneration Studies: The reusability of the O-ACF electrode was assessed through multiple adsorption-regeneration cycles using different regenerants (HNO₃, HCl, and distilled water) to evaluate its long-term performance and economic viability.
  • Characterization: The ACF and O-ACF materials were characterized using Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) to confirm the modification and analyze surface changes.

Datasets

Not discussed in the paper. The study relies on experimental data generated from laboratory tests using prepared solutions and materials.

Key Insights and Ideas

  • Oxidation Modification is Key: The nitric acid oxidation significantly enhances the adsorption capacity of ACF for Cu(II). This modification introduces more oxygen-containing functional groups, which are crucial for binding Cu(II) ions.
  • Electro-Adsorption Synergy: Combining activated carbon fiber with an electric field provides a powerful mechanism for Cu(II) removal, exceeding the performance of simple adsorption. The electric field aids in directing and concentrating the Cu(II) ions towards the O-ACF electrode.
  • Optimal Conditions are Crucial: The study meticulously identifies the sweet spot for electro-adsorption, revealing that a voltage of 1.0 V, a slightly acidic pH of around 6, and a 10 mm electrode plate spacing yield the best results. Deviations from these conditions can significantly reduce efficiency.
  • Chemisorption Dominates: Kinetic modeling strongly suggests that the adsorption of Cu(II) onto O-ACF is primarily a chemisorption process, implying a chemical interaction between the copper ions and the modified surface rather than just physical binding.
  • Dual Diffusion Control: The intraparticle diffusion model indicates that both membrane diffusion (external) and internal diffusion within the O-ACF pores play a role in the adsorption process.
  • Excellent Reusability: The O-ACF electrode demonstrates remarkable stability and regenerability, maintaining over 95% of its adsorption capacity after multiple cycles, particularly when regenerated with dilute nitric acid. This is a critical factor for practical, cost-effective applications.

Key Results

  • Max Adsorption Capacity: The O-ACF electrode achieved a maximum adsorption capacity of 48.60 mg/g, which is 1.63 times higher than that of commercial activated carbon.
  • Optimal Working Conditions:
    • Voltage: 1.0 V
    • pH: Approximately 6
    • Electrode Plate Spacing: 10 mm
  • Kinetic Model: The adsorption process best fits the pseudo-second-order kinetic model, indicating chemisorption.
  • Regeneration Performance: O-ACF maintained 95% of its adsorption performance after 5 adsorption-regeneration cycles using 20% HNO₃ as the regenerant.
  • Comparison: O-ACF showed significantly improved adsorption capacity compared to unmodified ACF and commercial AC.

Limitations and Future Work

  • Limited Scope of Pollutants: The study focuses solely on Cu(II) removal. While promising, its effectiveness with other heavy metals or co-existing pollutants in complex industrial wastewater needs further investigation.
  • Lab-Scale Study: The experiments were conducted under controlled laboratory conditions. Scaling up the process to industrial wastewater treatment requires further engineering and pilot studies.
  • Regenerant Choice: While 20% HNO₃ showed the best regeneration results, its use in large-scale applications might have cost and environmental implications that need to be considered. Exploring alternative, greener regenerants could be beneficial.
  • Long-Term Stability: While 5 cycles showed excellent performance, the long-term stability and potential degradation of the O-ACF electrode over hundreds or thousands of cycles in real-world conditions would be valuable to assess.

The authors suggest that O-ACF is an excellent material for capacitive deionization systems and holds great promise for applications in sewage treatment, seawater desalination, and nutrient recovery. Future work could focus on optimizing regeneration strategies, testing in real industrial effluents, and exploring the material's performance for other target pollutants.

Summary updated

Abstract

At present, wastewater discharged from many industries contains a large amount of Cu (II). In this study, an O-modified activated carbon fiber (O-ACF) with high adsorption activity was prepared by oxidation modification of activated carbon fiber with 20% nitric acid. O-ACF was used to adsorb Cu (II) in water. Electrode adsorption experiments showed that O-ACF had excellent electro-adsorption performance for Cu (II), and the maximum adsorption capacity was 48.60 mg/g, which was 1.63 times that of commercial activated carbon. After optimizing and adjusting the voltage (0.6–1.2 V), pH (2–10) and electrode plate spacing (5–20 mm), it was found that the most favorable working conditions for electro-adsorption of Cu (II) by O-ACF electrode were voltage of 1.0 V, solution pH of about 6, and electrode plate spacing of 10 mm. The kinetic model fitting showed that the adsorption effect of O-ACF on Cu (II) was mainly chemical adsorption. The intraparticle diffusion model further found that the adsorption of Cu (II) by O-ACF was influenced by membrane diffusion and internal diffusion. Adsorption regeneration experiment showed that O-ACF still maintained 95% adsorption performance for Cu (II) after 5 times of adsorption regeneration, which had good practicability. This study provides an excellent material for capacitive deionization system, which is expected to be applied in sewage treatment, seawater desalination and nutrient recovery.
BibTeX
@inproceedings{xiao2023o,
  author = {Zibo Xiao and Xinkun Zhao and Junjie Gu and Zhe Hu and Hongkai Fan and Qingfeng Chen},
  title = {{O-Modified Activated Carbon Fiber Electrode Efficiently Adsorption of Cu (II) in Wastewater}},
  booktitle = {Sustainability},
  year = {2023},
  doi = {10.3390/su151310078},
}
Figure