Numerical Study on the Thermal Field and Heat Transfer Characteristics of a Hexagonal-Close-Packed Pebble Bed

Leisheng Chen, Jiahao Zhao, Yuejin Yuan, Jaeyoung LeeComput 2022 · DOI

TL;DR

This paper presents a computational fluid dynamics (CFD) study of heat transfer in a hexagonal-close-packed (HCP) pebble bed, a common fuel element arrangement in high-temperature gas-cooled reactors (HTGRs). The research identifies specific regions of intense and weak heat transfer and proposes correlations for average heat transfer coefficients and Nusselt numbers, offering valuable insights for designing safer HTGR cores and mitigating hotspots.

What Problem Does This Paper Address?

High-temperature gas-cooled reactors (HTGRs) often utilize spherical fuel elements packed in a bed. The arrangement of these pebbles significantly impacts heat transfer efficiency and can lead to the formation of "hotspots" – localized areas of excessively high temperature. These hotspots pose a risk to the integrity of the fuel elements and can potentially lead to serious accidents. While previous research has explored heat transfer in simple cubic (SC), face-centered cubic (FCC), and body-centered cubic (BCC) pebble bed structures, the hexagonal-close-packed (HCP) structure, which has a similar packing ratio to FCC but is less studied, remains an area needing deeper investigation. Understanding the thermal behavior of HCP pebble beds is crucial for accurate reactor design, safety analysis, and the development of strategies to prevent hotspot formation.

Methods

The authors employed computational fluid dynamics (CFD) using ANSYS CFX-17.0 software to simulate the thermal and flow fields within an HCP-structured pebble bed. A detailed geometric model of the pebble bed, including 17 pebbles and 17 heaters, was created. Unstructured grids with tetrahedral and hexahedral cells were used for meshing, with a grid independence test conducted to ensure accuracy. The standard k-ɛ turbulence model was chosen for its balance between accuracy and computational load. Governing equations for continuity, momentum, and energy were solved, along with boundary conditions representing various coolant inlet velocities (2.1, 2.8, 3.5, and 4.3 m/s). Local heat transfer coefficients (HTCs) were calculated using surface and subsurface temperature measurements, and average HTCs and Nusselt numbers were derived and correlated with Reynolds and Prandtl numbers.

Datasets

Not discussed in the paper. The study relies on numerical simulations rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Localized Heat Transfer Hotspots: The strongest heat transfer occurs near the right vertices of the top and bottom spheres in the HCP arrangement. Conversely, the weakest heat transfer is observed at the contact points between pebbles, where fluid flow is minimal.
  • HCP vs. FCC Heat Transfer: The study found that the heat transfer intensity of the HCP structure is generally weaker than that of the FCC structure, despite having a similar packing ratio. This suggests that structural complexity and flow patterns play a significant role beyond just porosity.
  • Correlation Development: The paper successfully developed empirical correlations for the average heat transfer coefficient ($h_{avg}$) and the Nusselt number ($Nu$) as functions of the Reynolds number ($Re$) and Prandtl number ($Pr$) for the HCP pebble bed. These correlations are valuable for simplified reactor design calculations.
  • Importance of Flow Patterns: The analysis highlights how localized flow patterns, such as stagnation regions and fast-flowing areas around pebbles, directly influence surface temperatures and local heat transfer coefficients.

Key Results

  • The strongest heat transfer was identified near the right vertices of the top and bottom pebbles.
  • The correlation for the average heat transfer coefficient was found to be $h_{avg} = 0.1545(k/L)Re^{0.8}$ (with $Pr = 0.712$ and $1.6 \times 10^4 < Re \le 4 \times 10^4$).
  • The correlation for the Nusselt number was determined as $Nu = 0.177Re^{0.8}Pr^{0.4}$ (with $Pr = 0.712$ and $1.6 \times 10^4 < Re < 4 \times 10^4$).
  • The average heat transfer coefficients for the HCP structure were found to be lower than those for the FCC structure under similar conditions.
  • Pebble surface temperatures decreased as the coolant inlet velocity increased.

Limitations and Future Work

The authors acknowledge several limitations and propose future research directions:

  • Limited Measurement Locations: The study suggests that the number of measurement locations might have influenced the comparison with FCC structures, potentially underestimating the HCP's heat transfer. Future work should involve more comprehensive measurement points.
  • Turbulence Model: The standard k-ɛ turbulence model was used. The authors suggest that an extended k-ɛ model could provide a more accurate flow field and better differentiate between convective and conductive heat transfer.
  • Hotspot Identification: While the study analyzes thermal fields, more detailed analysis with increased measurement locations is needed to precisely identify and characterize hotspot distributions.
  • Enhancement Strategies: Future research could explore methods to enhance heat transfer in HCP pebble beds, such as adding small spheres of varying sizes.
  • Experimental Validation: Conducting experiments to measure surface temperatures and visualize flow patterns is crucial for validating the numerical results.
  • Comparison with Other Structures: Further detailed comparisons of thermal and flow fields between HCP and other structures are planned.

Summary updated

BibTeX
@article{chen2022numerical,
  author = {Leisheng Chen and Jiahao Zhao and Yuejin Yuan and Jaeyoung Lee},
  title = {{Numerical Study on the Thermal Field and Heat Transfer Characteristics of a Hexagonal-Close-Packed Pebble Bed}},
  journal = {comput.},
  year = {2022},
  doi = {10.3390/computation10010001},
}
Figure