Numerical Study on the Influence of Combined Rectification Facilities on the Flow in the Forebay of Pumping Station

Xiaobo Zheng, Pengli Zhang, Wenjing Zhang, Yue Yu, Yaping ZhaoWater 2023 · DOI

TL;DR

This paper investigates how to improve the flow dynamics within the forebay of a pumping station, a critical area affecting pump efficiency and stability. Through numerical simulations, the study demonstrates that a combined "bottom sill + diversion pier" system significantly reduces undesirable flow patterns like backflow and vortices, leading to more uniform flow distribution to the pumps.

What Problem Does This Paper Address?

Pumping stations are vital for water management, and their forebay – the area where water enters before being drawn into the pumps – plays a crucial role in their performance. In many existing designs, the forebay experiences problematic flow patterns such as large-scale backflows and vortices. These issues not only lead to sediment deposition but also disrupt the smooth, even flow required for optimal pump operation, ultimately reducing efficiency and potentially causing instability. While previous research has explored individual rectification measures, there's a need to understand the synergistic effects of combined facilities, particularly in large-scale pumping stations.

Methods

The researchers employed a three-dimensional (3D) numerical simulation approach using computational fluid dynamics (CFD). Specifically, they utilized the RNG k-ε turbulence model, which is well-suited for turbulent flows with swirling and high strain rates, common in pumping station forebays. The simulation domain included the water diversion pipe, forebay, inlet pool, and suction trumpet. A hexahedral structured grid was generated for meshing, and grid independence was verified to ensure accurate results. The study then simulated various operating conditions, including different numbers of pumps running in parallel, under three scenarios: the original design, a "bottom sill" rectification scheme, and a "bottom sill + diversion pier" combined scheme. Key performance indicators analyzed included flow velocity distribution, vorticity, flow distribution coefficient, velocity distribution uniformity, and average drift angle.

Datasets

Not discussed in the paper. The study relies on a numerical model of a specific large pumping station.

Key Insights and Ideas

  • The "perfect storm" of forebay flow: The original design, with its large diffusion angle and high-speed water jets from pressurized pipes, creates a perfect recipe for backflow and vortices, especially when multiple pumps operate simultaneously.
  • Bottom sill as a first responder: A bottom sill effectively intercepts the central water jet, diffusing it outwards and disrupting the main backflow. This is a good first step, but it doesn't entirely eliminate issues on the sides.
  • Diversion piers as the finishing touch: Adding diversion piers after the bottom sill creates a secondary rectification, further homogenizing the flow and effectively eliminating the remaining undesirable patterns.
  • Synergy is key: The combined "bottom sill + diversion pier" approach is significantly more effective than either measure alone, highlighting the importance of integrated design.
  • Uniformity is paramount: The ultimate goal is uniform flow distribution to each pump, and the combined rectification scheme achieves this much better than the original design or the single-sill approach.

Key Results

  • Original Design: Characterized by large-scale backflow and vortices, particularly on the sides of the forebay and near the pump inlets. Uneven flow distribution among operating units was observed.
  • Scheme 1 (Bottom Sill): Improved flow patterns by diffusing the central water jet, leading to more stable flow lines and better distribution to some units. However, lateral side flows and some vortices persisted.
  • Scheme 2 (Bottom Sill + Diversion Pier): This combined approach was the most effective. Large-scale backflow and vortices were "basically eliminated." Flow distribution to individual pump units became significantly more uniform, with flow distribution coefficients approaching 1. Velocity distribution uniformity increased by up to 7.46% for five units running in parallel, and the mean drift angle decreased substantially.

Limitations and Future Work

The authors acknowledge that the current study represents a "model stage" and that the proposed rectification technology is feasible. However, they emphasize the need for:

  • More experimental verification: To further validate the numerical findings.
  • Consideration of additional factors: Such as incoming flow speed and rate, which can influence the effectiveness of the rectification facilities.
  • Specific design optimization: The size and location of the rectification facilities need to be specifically designed for each unique pumping station to achieve optimal performance.

Summary updated

Abstract

The flow pattern of the forebay of the pumping station has a considerable effect on the operating efficiency and stability of the pump unit. A good forebay flow pattern can enable the pump unit to improve efficiency and operating conditions. This study takes a large pumping station as the research object and considers two rectification schemes, namely, a single bottom sill and a “bottom sill + diversion pier”. Without rectification facilities under different start-up schemes, the forebay flow pattern after the addition of rectification facilities is calculated, and the influence of single and combined rectification facilities is analyzed. Results show large-scale undesirable flow structures such as backflow and vortex in the forebay of the original design that without rectification facilities and uneven flow distribution occurs in the operating unit. The addition of a bottom sill in the forebay can control the central water beam from the water diversion pipe. The flow is divided to spread to both sides of the forebay and can be rectified twice after installing the diversion piers. The combined rectifier facility of “bottom sill + diversion pier” is beneficial to disperse incoming flow and make the flow distribution of each unit more uniform. The backflow and vortex inside the forepond are basically eliminated, and the flow state of the forepond is significantly improved.
BibTeX
@inproceedings{zheng2023numerical,
  author = {Xiaobo Zheng and Pengli Zhang and Wenjing Zhang and Yue Yu and Yaping Zhao},
  title = {{Numerical Study on the Influence of Combined Rectification Facilities on the Flow in the Forebay of Pumping Station}},
  booktitle = {Water},
  year = {2023},
  doi = {10.3390/w15213847},
}
Figure