Numerical Simulation of Hydrogen–Coal Blending Combustion in a 660 MW Tangential Boiler

Lijiang Dong, Shangwen Huang, Baiyun Qian, Kaike Wang, Ning Gao, Xiang Lin, Zeqi Shi, Hao LüProcesses 2024 · DOI

TL;DR

This paper numerically simulates the combustion of pulverized coal blended with hydrogen (1%, 5%, 10%) in a 660 MW tangential boiler. The findings show that hydrogen blending significantly reduces CO2 emissions, aids pulverized coal ignition, but also leads to lower overall temperatures and requires adjustments to air distribution for optimal combustion.

What Problem Does This Paper Address?

The global push for carbon neutrality necessitates a transition away from traditional coal-fired power generation. Hydrogen is a promising clean fuel, but its integration into existing coal power infrastructure, particularly large-scale boilers, presents significant technical challenges. This paper addresses the need to understand how blending hydrogen with pulverized coal affects combustion dynamics, emissions, and thermal performance in a typical 660 MW tangential boiler, aiming to provide insights for retrofitting existing plants and reducing carbon footprints.

Methods

The researchers employed a numerical simulation approach using a realizable k-ɛ turbulence model, a stochastic particle trajectory model for pulverized coal, and established models for devolatilization, gas-phase combustion, char combustion, and radiative heat transfer. They simulated four cases: a baseline with 0% hydrogen and three cases with 1%, 5%, and 10% hydrogen blending (based on calorific value). The simulation focused on analyzing the flow field, temperature distribution, and species concentrations (O2, CO, CO2, H2O, H2) within the boiler. Mesh independence was verified to ensure simulation accuracy.

Datasets

The study utilized the properties of pulverized coal as provided in Table 1 and Table 2, which detail proximate and ultimate analyses. The simulation was validated against design and measurement data from a previous study [26] for key parameters like O2, CO2, gas temperature, and flue temperature, with reported relative errors within ±5%.

Key Insights and Ideas

  • Hydrogen as a "Spark Plug": The rapid combustion of hydrogen releases significant heat, effectively aiding the ignition of pulverized coal, especially in the lower burner layers.
  • CO2 Reduction at Source: Blending hydrogen directly reduces CO2 emissions by displacing a portion of the coal fuel. The study quantifies this reduction, showing a decrease from 15.6% to 13.6% CO2 mole fraction with 10% hydrogen blending.
  • Temperature Trade-offs: While hydrogen aids ignition, the increased production of H2O (a product of hydrogen combustion) absorbs heat, leading to a lower overall furnace temperature, particularly at higher blending ratios. This can impact heat exchange efficiency.
  • Uniformity vs. Peak Temperature: Higher hydrogen blending leads to a more uniform temperature distribution across the furnace, although the peak temperatures are reduced.
  • Air Distribution Mismatch: The existing air distribution system, optimized for coal combustion, is insufficient for the altered combustion dynamics with hydrogen blending. This leads to increased O2 and CO concentrations in the upper furnace, indicating incomplete combustion.
  • Hydrogen's Role in Stability: The paper suggests that hydrogen's ability to support combustion and reduce emissions could be crucial for stabilizing boiler operation at low and variable loads in the future.

Key Results

  • CO2 Reduction: A 10% hydrogen blend reduced CO2 concentration from 15.6% to 13.6%.
  • Temperature Impact: The maximum furnace temperature decreased by approximately 5.3% with a 10% hydrogen blend.
  • Species Concentration Changes:
    • O2 and CO concentrations increased in the upper furnace with higher hydrogen blending.
  • CO2 concentration decreased significantly with increasing hydrogen blending.
  • H2O concentration increased substantially with higher hydrogen blending.
  • Flow Field Adjustments: Hydrogen injection increased the tangent circle diameter at the B-layer burners, enhancing coal-wind mixing.

Limitations and Future Work

The authors acknowledge that the current air distribution pattern is not optimal for hydrogen-coal blending, suggesting that future work should focus on redesigning air distribution schemes for coal-hydrogen cofiring. They also propose exploring methods to reduce the effect of air temperature on combustion by decreasing total airflow and adjusting H2 burner operating layers for more even H2 distribution. Preheating pulverized coal is also suggested to ensure adequate combustion. The study's focus on a specific boiler type and blending ratios implies that further research is needed to generalize these findings. The paper also notes that while hydrogen blending reduces CO2 at the source, the increased H2O production and potential impact on heat exchange efficiency warrant further investigation.

Summary updated

Abstract

With the adjustment of energy structure, the utilization of hydrogen energy has been widely attended. China’s carbon neutrality targets make it urgent to change traditional coal-fired power generation. The paper investigates the combustion of pulverized coal blended with hydrogen to reduce carbon emissions. In terms of calorific value, the pulverized coal combustion with hydrogen at 1%, 5%, and 10% blending ratios is investigated. The results show that there is a significant reduction in CO2 concentration after hydrogen blending. The CO2 concentration (mole fraction) decreased from 15.6% to 13.6% for the 10% hydrogen blending condition compared to the non-hydrogen blending condition. The rapid combustion of hydrogen produces large amounts of heat in a short period, which helps the ignition of pulverized coal. However, as the proportion of hydrogen blending increases, the production of large amounts of H2O gives an overall lower temperature. On the other hand, the temperature distribution is more uniform. The concentrations of O2 and CO in the upper part of the furnace increased. The current air distribution pattern cannot satisfy the adequate combustion of the fuel after hydrogen blending.
BibTeX
@inproceedings{dong2024numerical,
  author = {Lijiang Dong and Shangwen Huang and Baiyun Qian and Kaike Wang and Ning Gao and Xiang Lin and Zeqi Shi and Hao Lü},
  title = {{Numerical Simulation of Hydrogen–Coal Blending Combustion in a 660 MW Tangential Boiler}},
  booktitle = {Processes},
  year = {2024},
  doi = {10.3390/pr12020415},
}
Figure