TL;DR
This paper presents a detailed finite element (FE) simulation of vehicular crashes into a three-bar metal bridge rail (TMBR) to evaluate its safety performance under MASH TL-2 and TL-3 standards. The study found the TMBR meets TL-2 requirements but fails TL-3 under certain conditions, highlighting the need for design improvements and offering insights into real-world scenarios like impacts behind sidewalks.
What Problem Does This Paper Address?
Bridge rails are critical safety devices designed to prevent vehicles from leaving the roadway and protect occupants. While traditional full-scale crash testing is the gold standard for evaluating these barriers, it's extremely expensive and time-consuming, especially when exploring numerous design variations. This paper addresses the need for a cost-effective and efficient method to assess the safety performance of a specific bridge rail, the three-bar metal bridge rail (TMBR), under various impact scenarios defined by the Manual for Assessing Safety Hardware (MASH) standards. Specifically, it aims to re-evaluate the TMBR's compliance with newer MASH standards (which replaced NCHRP Report 350) and explore its performance in a common real-world condition: when installed behind a sidewalk.
Methods
The researchers employed advanced finite element (FE) modeling and simulations using LS-DYNA R11.2.0. They developed detailed FE models of a three-bar metal bridge rail (TMBR) and two test vehicles: a 2010 Toyota Yaris (representing an 1100C vehicle) and a 2014 Chevy Silverado (representing a 2270P vehicle).
The TMBR model was constructed based on NCDOT specifications, incorporating aluminum rails, aluminum posts, clamping bars, and concrete parapets with reinforcing steel bars. Different material models were used for each component to accurately represent their behavior under impact.
The vehicle FE models were adapted from existing, validated models developed by the National Crash Analysis Center (NCAC). These models were further enhanced for numerical stability and validated against physical crash tests of a similar bridge rail system.
Crash simulations were conducted according to MASH TL-2 and TL-3 requirements, specifying impact speeds and angles. The evaluation focused on three key MASH criteria:
- Structural Adequacy (Criterion A): Ensuring the barrier contains and redirects the vehicle without overriding, underriding, or penetrating.
- Occupant Risk (Criteria D, F, H, I): Assessing debris intrusion, vehicle pitch/roll angles, occupant impact velocity (OIV), and occupant ride-down acceleration (ORA).
- Post-Impact Trajectory (Criterion N): Evaluating if the vehicle remains within a defined "exit box" after impact, indicating a safe return to the roadway.
A specific scenario involving the TMBR installed behind a 1.52 m wide sidewalk was also simulated to assess its performance under in-service conditions.
Datasets
The study utilized existing validated FE models of the 2010 Toyota Yaris and 2014 Chevy Silverado, originally developed by the National Crash Analysis Center (NCAC) and available from the National Highway Traffic Safety Administration (NHTSA). These models were previously validated against physical crash tests. The TMBR model was based on specifications from the North Carolina Department of Transportation (NCDOT).
The evaluation of the TMBR's performance was benchmarked against the criteria set forth in the Manual for Assessing Safety Hardware (MASH) standards (specifically TL-2 and TL-3). The study also referenced data from physical crash tests conducted at the Midwest Roadside Safety Facilities (MwRSF) for model validation purposes.
Key Insights and Ideas
- MASH TL-2 Compliance is Solid: The TMBR performs well under the less severe MASH TL-2 conditions, meeting all structural, occupant risk, and trajectory requirements. This suggests the rail is robust enough for lower-speed, lower-severity impacts.
- TL-3 Challenges Emerge: The TMBR struggles with MASH TL-3 requirements when impacted by the lighter Toyota Yaris. Specifically, it fails to meet occupant risk (high OIV) and post-impact trajectory (vehicle exiting the defined box) criteria. This indicates a potential vulnerability at higher speeds and angles.
- Sidewalks Can Mitigate Impact Severity: Simulating the TMBR behind a sidewalk showed a significant reduction in impact severity for the Toyota Yaris. While the longitudinal OIV still slightly exceeded the MASH limit, the overall performance improved, suggesting that the sidewalk can act as a buffer.
- FEA as a Powerful Design Tool: The study successfully demonstrates the utility of FE simulations in evaluating bridge rail performance. The validated models provide a cost-effective way to identify potential issues and guide design improvements before expensive physical testing.
- Model Validation is Crucial: The paper emphasizes the importance of validating FE models against physical test data. Even with slight differences in vehicle models and years between simulations and tests, the general agreement in responses provides confidence in the FEA approach.
Key Results
- MASH TL-2: The TMBR met all MASH TL-2 requirements for both the 1100C (Toyota Yaris) and 2270P (Chevy Silverado) vehicles. Maximum deflections were within acceptable limits, and no debris entered the occupant compartments.
- MASH TL-3 (No Sidewalk):
- 2014 Chevy Silverado: The TMBR met all MASH TL-3 requirements, including structural adequacy, occupant risk, and post-impact trajectory.
- 2010 Toyota Yaris: The TMBR failed to meet MASH Criterion H (occupant risk, specifically high longitudinal OIV of 15.28 m/s vs. limit of 12.2 m/s) and MASH Criterion N (post-impact trajectory, exiting the defined box).
- MASH TL-3 (With 1.52 m Sidewalk):
- 2010 Toyota Yaris: The TMBR met all MASH safety requirements except for the longitudinal OIV, which exceeded the limit by 3.93% (12.68 m/s vs. 12.2 m/s). This slight exceedance was deemed within acceptable error margins. The exit angle was 15°, meeting Criterion N.
Limitations and Future Work
- Model Limitations: While the FE models were validated, the paper acknowledges that physical crash tests with the exact same or similar vehicles as the FE models would be extremely useful for further fine-tuning and improving accuracy and fidelity.
- Simulation vs. Real-World: The authors note that simulation results provide insights into general trends but should not be considered definitive conclusions for all real-world scenarios. Full-scale crash tests remain essential for final validation.
- Future Work: The study suggests that the identified potential issues and safety concerns can guide future designs, improvements, and further testing of the TMBR. The FE simulation approach itself is highlighted as a valuable tool for exploring various design options cost-effectively. More extensive physical testing is recommended to further refine the FE models and enhance their accuracy.
Summary updated