TL;DR
This paper investigates the dangerous "water hammer" phenomenon in rocket propellant filling pipelines. By developing a simulation model and conducting real-world experiments, the authors identify key factors contributing to water hammer and propose practical strategies, like adjusting valve sequencing and pump speed, to significantly mitigate its impact and improve filling accuracy and system reliability.
What Problem Does This Paper Address?
The successful launch of a rocket hinges on the precise and safe delivery of propellants. The filling pipeline, responsible for transporting these volatile substances from storage to the rocket's tank, is a critical component. However, a significant challenge arises from a phenomenon known as "water hammer." This occurs when fluid flow in a pipeline changes abruptly, often due to sudden valve closures or openings, leading to rapid pressure surges. In rocket propellant filling, these surges can exceed normal operating pressures by over 15 times, potentially damaging equipment, compromising system reliability, and even causing measurement errors in flowmeters, leading to inaccurate propellant quantities. Existing research has explored water hammer in general propulsion systems, but specific analysis and mitigation strategies for the unique conditions of rocket propellant filling pipelines, considering factors like pipeline accessories, were lacking.
Methods
The authors employed a multi-faceted approach combining numerical simulation and experimental validation.
- Numerical Simulation: They established a simulation calculation model for the propellant filling system using Flowmaster software. This model incorporated various components like storage tanks, pumps, flowmeters, pipelines, valves, and filters. The core of their simulation relied on the method of characteristics, a standard technique for solving hyperbolic partial differential equations that govern fluid transients like water hammer. This method transforms the complex partial differential equations into a system of ordinary differential equations along characteristic lines, which are then solved using finite difference equations.
- Experimental Validation: A real experimental system was set up to mirror the actual filling process. The researchers meticulously recorded pressure changes during filling operations using a pressure acquisition system. They then compared these real-world results with the predictions from their simulation model to validate its accuracy.
- Mitigation Strategies: Based on their analysis, the authors proposed and tested several improved schemes to reduce water hammer effects. These included:
- Altering the sequence of valve closures.
- Reducing the filling pump speed.
- Increasing the opening of the electric control valve.
Datasets
The paper does not explicitly mention or introduce new datasets for training. Instead, it relies on:
- Actual Product Manuals: Physical parameters for the fluid N2O4 (viscosity, density, saturation pressure) were obtained from actual product manuals.
- Real-World Experimental Data: The primary "dataset" used for evaluation and validation consists of pressure measurements collected during actual rocket propellant filling experiments under various controlled conditions.
Key Insights and Ideas
- The "Gravity Drop" Trigger: A key insight is that the sudden downward acceleration of fluid in a vertical section of the pipeline, caused by gravity when a valve is opened, is a primary trigger for water hammer during the filling process.
- Significant Pressure Amplification: The paper quantifies the severity of water hammer, showing peak pressures can exceed normal operating pressures by over 15 times, far surpassing design limits and posing a serious risk.
- Valve Sequencing Matters: Modifying the order in which valves are closed during the transition phase can significantly reduce the peak pressure of water hammer.
- Slower is Safer: Reducing the pump speed during critical transition phases demonstrably lowers the intensity of water hammer.
- Control Valve Opening as a Buffer: Increasing the opening of the electric control valve also contributes to mitigating pressure surges.
- Simulation Accuracy: The simulation model developed by the authors showed good agreement with experimental results, providing a reliable tool for analyzing and predicting water hammer behavior.
Key Results
The experiments demonstrated the effectiveness of the proposed mitigation strategies:
- Experiment 1 (Baseline): Water hammer peak pressure reached 3.25MPa.
- Experiment 2 (Changed Valve Sequence): Peak pressure reduced to 2.85MPa, a 12.3% decrease compared to the baseline.
- Experiment 3 (Reduced Pump Speed): Peak pressure further reduced to 2.57MPa, a 9.8% decrease from Experiment 2.
- Experiment 4 (Increased Electric Control Valve Opening): Peak pressure was further reduced to 2.35MPa, an 8.6% decrease from Experiment 3.
Overall, the most effective mitigation strategy (Experiment 4) reduced the water hammer peak pressure by 27.7% compared to the baseline. The simulation results consistently aligned with the experimental data, indicating good consistency and reliability.
Limitations and Future Work
- Focus on Filling Control Process: The paper acknowledges that its analysis of water hammer effects was primarily focused on the filling control process.
- Future Work Suggestion: To further eliminate water hammer effects, the authors suggest future research should focus on improving the overall process design of the filling system itself, beyond just control strategies.
Summary updated