Introduction
The 3GPP is currently integrating "Ambient IoT" (AIoT) into 5G Release 19. These devices are unique, often being battery-free and relying on energy harvested from radio waves, light, or heat. Standard 5G security protocols, such as 5G AKA, were designed for high-performance smartphones and involve complex key hierarchies and multiple communication rounds. For an AIoT device operating on a limited energy budget, these standard protocols are often too energy-intensive, depleting harvested power before data transmission can occur.
Proposed Methodology
The researchers propose ultra-lightweight authentication protocols specifically designed to fit within the "joule budget" of passive sensors. Three distinct variants were developed: SQN-based (using sequence numbers), Nonce-based (using fresh random numbers), and Physical Layer Key (PLK)-based (leveraging wireless channel characteristics).
Key Innovations
- Simplified Key Hierarchy: The protocols strip away unnecessary intermediate keys (such as $K_{SEAF}$ and $K_{gNB}$) required by standard 5G architectures, reducing computational overhead.
- Ascon Integration: The protocols utilize Ascon, a NIST-standardized lightweight Authenticated Encryption with Associated Data (AEAD) algorithm. Ascon performs encryption and integrity checks simultaneously, which is significantly more efficient for 8-bit microcontrollers than traditional methods.
- One-Round Efficiency: The design achieves mutual authentication and session key agreement with fewer interactions than standard 3GPP methods.
Experimental Evaluation
To validate the protocols, the authors used a Teensy 2.0 development board (8-bit ATMEGA32U4 processor) down-clocked to 4MHz to reflect real-world AIoT constraints. They benchmarked the proposed Ascon-based approach against standard algorithms like AES and HMAC-SHA256.
Performance Results
The comparison against existing 3GPP standards (5G AKA, EAP-AKA’, etc.) revealed dramatic improvements:
- Execution Time: Standard 5G AKA requires approximately 3.5 seconds. The proposed SQN+Ascon version completes in just 0.02 seconds.
- Energy Consumption: For a device powered by a 36µAs capacitor, standard protocols consume over 38% of total energy for authentication alone. In high-power scenarios (300µW), standard protocols require more energy than the capacitor can hold. The Ascon-based protocol, however, consumes only 0.1% to 11.1% of available energy.
Conclusion and Future Work
The shift from AES-based to Ascon-based protocols represents an order-of-magnitude leap in efficiency for resource-constrained hardware. While highly effective, these protocols face standardization hurdles, as they require the 3GPP core network to support modified key derivation and the Ascon algorithm. Future research will focus on handling massive-scale deployments where thousands of AIoT devices authenticate simultaneously.
Summary updated