Novel 3D Hall sensor and its application in inspection robots

Dragana Popovic Renella, Thomas Kaltenbacher, Sasa Spasic, Andrea Cavelti, Giorgio Valsecchi, Lennart Nachtigall, Marco Hutter2023 · DOI

TL;DR

This paper introduces a novel, compact 3D Hall-effect sensor fabricated using CMOS technology that can simultaneously measure magnetic fields in all three dimensions. This sensor offers high spatial resolution and accuracy, making it ideal for applications like advanced robotics, and is demonstrated for improving adhesion control in inspection robots.

What Problem Does This Paper Address?

Precise measurement of magnetic fields is crucial in many industries, including robotics. While traditional Hall-effect sensors are widely used, they often struggle to capture magnetic field information in all three dimensions simultaneously at a single point. This limitation hinders accurate measurement of high-gradient magnetic fields, which are common in applications involving permanent magnets, electromagnets, and magnet assemblies. The paper addresses this by developing a sensor that overcomes these limitations, enabling comprehensive 3D magnetic field sensing.

Methods

The core innovation is a novel CMOS magnetic field sensor, dubbed SENM3Dx, designed to measure all three magnetic field components (Bx, By, and Bz) concurrently. This is achieved by integrating three groups of mutually orthogonal Hall-effect elements (both horizontal and vertical) onto a single chip. Each group is equipped with dedicated biasing circuits and amplifiers. The sensor's field-sensitive volume is remarkably small (100 x 100 µm²), enabling high spatial resolution. CMOS technology ensures high angular accuracy and orthogonality between the measurement axes. A key technique employed is the "spinning-current" method, which effectively mitigates common Hall sensor issues like offset, low-frequency noise, and the planar Hall effect. The sensor also boasts a wide analog bandwidth (DC to 300 kHz) and an integrated temperature sensor.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • True 3D Sensing in a Compact Package: The ability to measure all three magnetic field components simultaneously from a single, tiny location (100x100 µm²) is a significant advancement. This is crucial for applications requiring detailed magnetic field mapping.
  • CMOS Integration for Performance: Leveraging CMOS technology not only allows for the integration of multiple Hall elements but also ensures high accuracy and orthogonality, which are often challenging to achieve with discrete components.
  • Spinning-Current Technique for Robustness: This technique is a clever way to overcome inherent limitations of Hall sensors, leading to more reliable and accurate measurements by reducing noise and offset.
  • Versatility Beyond 3D Positioning: While designed for 3D sensing, the sensor's characteristics (wide bandwidth, temperature sensing) make it suitable for a broad range of applications, from current sensing to magnetometry.
  • Robotics Application: Adhesion Control: The paper demonstrates a practical and impactful application in inspection robots, where precise feedback on magnetic adhesion force is critical for safety and efficiency.

Key Results

The paper describes a novel 3D Hall sensor with:

  • Simultaneous measurement of Bx, By, and Bz components.
  • Compact sensitive volume of 100 x 100 µm².
  • High angular accuracy and orthogonality due to CMOS integration.
  • Mitigation of offset, low-frequency noise, and planar Hall effect via spinning-current technique.
  • Wide analog bandwidth from DC to 300 kHz.
  • Integrated temperature sensor.

The application example in inspection robots shows the sensor's utility in estimating magnetic adhesion force, with a demonstrated prediction model achieving a maximum relative error of 23% for a 5mm thick steel plate, which is considered acceptable for safety-critical applications.

Limitations and Future Work

The authors acknowledge that the magnetic angle provides less reliable data for estimating adhesion force compared to the magnetic magnitude. While the magnetic angle can be used to estimate air gap distance, the magnetic field magnitude is preferred for adhesion force determination. The paper suggests that the sensor's fast and dynamic responses enable the use of adaptive models that can train and react in real-time, hinting at future work in developing more sophisticated real-time control systems. The paper also positions the SENIS® 3D Hall sensors as a key component for future advancements in magnetometry and sensor technology.

Summary updated

Abstract

This paper describes a novel CMOS magnetic field sensor that can measure all three magnetic field components (Bx, By, and Bz) simultaneously at a single location. The sensor employs three groups of mutually orthogonal horizontal and vertical Hall-effect elements, each with dedicated biasing circuits and amplifiers. The field sensitive volume of the 3D sensor is very compact, only 100 x 100 μm2, which enables high spatial resolution. The use of CMOS technology ensures high angular accuracy and orthogonality of the three measurement axes. The sensor also employs a spinningcurrent technique that effectively mitigates issues such as offset, low-frequency noise, and planar Hall effect. The wide analog bandwidth from DC to 300 kHz and built-in temperature sensor make the sensor suitable for various applications, including 3D positioning sensors, proximity sensors, current sensors, and magnetometry. As an example, the paper discusses an application of the 3D sensor for improved adhesion control in inspection robots.
BibTeX
@misc{renella2023novel,
  author = {Dragana Popovic Renella and Thomas Kaltenbacher and Sasa Spasic and Andrea Cavelti and Giorgio Valsecchi and Lennart Nachtigall and Marco Hutter},
  title = {{Novel 3D Hall sensor and its application in inspection robots}},
  year = {2023},
  doi = {10.21014/tc4-2023.16},
}

Loading related content...

Figure