Non-resistance-based cell-state metric for phase-change memory
Lists
Only you see this
Abstract
In phase-change memory (PCM), low-field electrical resistance is typically used to quantify the programmed cell state. However, this metric has several disadvantages. First, it exhibits temporal drift, which is a significant challenge for realizing multilevel PCM. Moreover, because of cell-geometry effects, this metric saturates after a certain point and thus masks the fact that the amorphous size increases with increasing input power. Finally, the resistance is typically measured as the current for a fixed bias voltage, which adversely affects the signal-to-noise ratio at high resistance values. A new metric for the programmed state in a PCM cell is proposed that has significant advantages over the resistance metric in all these aspects and is more representative of the fundamental programmed entity, which is the amorphous/crystalline phase configuration in the PCM cell. Analytical and experimental results are presented that demonstrate the efficacy of the proposed metric.
BibTeX
@article{sebastian2011non,
author = {Abu Sebastian and Nikolaos Papandreou and Angeliki Pantazi and Haralampos Pozidis and Evangelos Eleftheriou},
title = {{Non-resistance-based cell-state metric for phase-change memory}},
journal = {Journal of Applied Physics},
year = {2011},
doi = {10.1063/1.3653279},
}Loading related content...