TL;DR
This paper proposes a new way to measure planetary surface area and path lengths based on actual gravity rather than arbitrary geometric shapes like ellipsoids. These "datumless" measures provide a universal, physically grounded standard that works for everything from the Earth to irregularly shaped asteroids and comets.
What Problem Does This Paper Address?
In traditional geodesy, measuring the surface area of a country or the length of a road requires a "datum"—usually a reference ellipsoid that approximates the planet's shape. However, this approach has three major flaws:
- Arbitrariness: Even for Earth, there are multiple competing reference ellipsoids (like WGS 84), leading to slightly different measurements depending on which one you pick.
- Irregularity: Many celestial bodies, such as asteroids (e.g., Vesta) or comets (e.g., 67P), are not even remotely ellipsoidal, making standard geodetic tools inherently inaccurate.
- The Fractal Problem: Because planetary surfaces are fractal-like, "true" surface area is technically infinite. We need a consistent way to define the "horizontal" or "bird's-eye view" area that ignores vertical cliffs and microscopic roughness.
Methods
The author, Kai Xu, introduces datumless geodetic measures by shifting the focus from geometry to physics.
- Defining the Surface ($S$): The surface is defined as all points on a planet not "overhung" by another point relative to gravitational field lines. Think of it as the parts of the planet that would be hit by "infinitesimal raindrops" falling straight down along gravity lines.
- Datumless Surface Area: Instead of measuring a geometric shell, the area is defined as the flux of unit gravity vectors through the surface. This effectively sums up the areas of infinitesimally small portions of equipotential surfaces (surfaces of constant gravitational potential) that intersect the actual terrain.
- Datumless Path Length: Similarly, path length is defined by integrating only the horizontal components of movement (normal to gravity), meaning vertical climbs or descents do not add to the "length" of a path.
- GIS Approximation: To make this practical, the paper provides formulas to approximate these measures using existing Digital Elevation Models (DEMs) and gravity models (geoids). It introduces two correction factors: $k_{elev}$ (for elevation above/below the ellipsoid) and $k_{grav}$ (for the tilt of gravity relative to the ellipsoid normal).
Datasets
The paper validates these definitions by comparing them against traditional ellipsoidal measures using high-resolution planetary data:
- Earth: ALOS World 3D-30m DEM and the EGM2008 geoid model.
- Mars: MGS MOLA 463m DEM and the MOLA MEGDR geoid.
- Vesta: Dawn FC HAMO Global 93m DEM and the Dawn v2 geoid.
Key Insights and Ideas
- Physics-First Geodesy: By using gravity as the reference, the measures become "datumless." They are inherent to the physical properties of the object rather than a human-defined geometric proxy.
- The "Bird's-Eye View" Formalized: The definitions mathematically capture our intuitive sense of "horizontal" area and length, ensuring that vertical features like cliffs don't artificially inflate surface area.
- The Mass-Area Identity: One of the most striking theoretical contributions is the DSA-Gravity-Mass Identity: $\bar{g}A = 4\pi GM$. This links the datumless surface area ($A$), the mean gravitational acceleration ($\bar{g}$), and the total mass ($M$) overhung by that area. It provides a fundamental physical bound on surface area.
- Universal Consistency: On "round" planets like Earth, the datumless area is remarkably close to traditional ellipsoidal area, but it provides a much-needed standard for "potato-shaped" asteroids where ellipsoids fail.
Key Results
The paper demonstrates that datumless measures are highly consistent with traditional ones on major planets while revealing local deviations:
- Earth: The datumless surface area is approximately 510.084 × 10⁶ km², compared to 510.066 × 10⁶ km² for the WGS 84 ellipsoid.
- Elevation Matters: On Earth, the datumless area of the Tibetan Plateau is significantly higher than its ellipsoidal area because its high elevation "stretches" the area relative to the reference ellipsoid (a positive $k_{elev}$ correction).
- Vesta: For the asteroid Vesta, the datumless area (8.68 × 10⁵ km²) is slightly larger than the ellipsoidal area (8.66 × 10⁵ km²), demonstrating the method's utility for non-spherical bodies.
Limitations and Future Work
- Dependency on Models: The accuracy of these measures is limited by the quality of the available Digital Elevation Models and gravity/geoid models. For many smaller asteroids, these models are still relatively coarse.
- Computational Implementation: While the paper provides the mathematical framework and approximation formulas, these are not yet standard features in common GIS software (like ArcGIS or QGIS). Future work could involve developing plugins to automate these "datumless" calculations for researchers.
- Complex Overhangs: While the definition handles "overhangs" (like caves or arches) by excluding them from the primary surface $S$, extremely convoluted bodies might require more complex topological analysis.
Summary updated