Non-destructive identification of Pseudostellaria heterophylla from different geographical origins by Vis/NIR and SWIR hyperspectral imaging techniques

Tingting Zhang, Lu Long, Yihu Song, Minyu Yang, Jing Li, Jiduan Yuan, Yuquan Lin, Xingren Shi, Mingjie Li, Xiaotan Yuan, Zhongyi Zhang, Rensen Zeng, Yuanyuan Song, Li GuFrontiers in Plant Science 2024 · DOI

In the world of traditional medicine, the "terroir" of a plant—its geographical origin—is everything. For Pseudostellaria heterophylla, a medicinal herb known as Tai-Zi-Shen (TZS), where it grows determines its chemical potency and market value. However, telling two dried roots apart by eye is nearly impossible. A new study published in Frontiers in Plant Science leverages hyperspectral imaging and deep learning to solve this problem non-destructively.

TL;DR

Researchers have developed a high-precision, non-destructive method to identify the geographical origin of the medicinal herb Tai-Zi-Shen using short-wave infrared (SWIR) hyperspectral imaging. By combining spectral data with a 1D Convolutional Neural Network (DCNN), the team achieved a classification accuracy of 98.7%, offering a rapid alternative to traditional, destructive chemical testing.

What Problem Does This Paper Address?

The therapeutic efficacy of TZS is heavily influenced by its growing environment. Distinguishing between origins is vital for quality control and preventing fraud. Currently, this is done using techniques like HPLC (High-Performance Liquid Chromatography), which are:

  1. Destructive: You have to grind up the sample to test it.
  2. Slow and Laborious: Requiring complex sample preparation.
  3. Environmentally Taxing: Using large quantities of organic solvents.

Because TZS roots from different regions look almost identical to the naked eye, there is a pressing need for a "scan-and-go" solution that can be used in actual production lines.

Methods

The researchers compared two types of Hyperspectral Imaging (HSI): Visible/Near-Infrared (Vis/NIR) (400–1000 nm) and Short-Wave Infrared (SWIR) (900–1700 nm).

The workflow involved:

  • Preprocessing: They tested several algorithms to clean the raw spectral data, finding that the Savitzky-Golay First Derivative (FD) was most effective at boosting the signal-to-noise ratio.
  • Feature Selection: To make the models faster, they used the Successive Projection Algorithm (SPA) and Competitive Adaptive Weighted Sampling (CARS) to identify the most "informative" wavelengths, discarding redundant data.
  • Classification: They pitted traditional machine learning (SVM, Random Forest, PLS-DA) against a modern Deep Convolutional Neural Network (DCNN).

Datasets

The study utilized a robust dataset of 3,249 TZS samples collected from four major Chinese provinces: Fujian, Guizhou, Jiangsu, and Anhui.

  • To ensure the model wasn't just "memorizing" one type of root, they included two to three different germplasm resources per region.
  • They also included three distinct quality grades (based on root diameter and weight) to ensure the origin identification worked regardless of the sample's physical size or shape.
  • A total of 12,996 hyperspectral images were generated for analysis.

Key Insights and Ideas

  • SWIR is the "Sweet Spot": The most significant finding was that SWIR data vastly outperformed Vis/NIR. While Vis/NIR captures color and pigments, SWIR captures the molecular vibrations of C-H, O-H, and N-H bonds. These bonds are directly related to the starch, protein, and cellulose content—the very things that vary based on the soil and climate of the origin.
  • Less is More with SPA: Using the SPA algorithm to select feature bands reduced the number of wavelengths by 77.2% (from 482 bands down to 110). Surprisingly, this didn't just maintain accuracy; it improved it from 97.6% to 98.1% in the SVM model by removing spectral noise.
  • Deep Learning as an End-to-End Solution: The 1D-DCNN proved to be a powerhouse. Unlike traditional models that require careful manual feature extraction, the DCNN could learn the intricate patterns of the spectra directly, achieving the highest overall accuracy.

Key Results

  • Top Performance: The SWIR-FD-DCNN model achieved a staggering 98.7% accuracy in identifying the geographical origin.
  • Vis/NIR vs. SWIR: The best Vis/NIR model only reached 91.4% accuracy, confirming that the "invisible" infrared spectrum holds the key to traceability.
  • Efficiency: The researchers successfully established a simplified model (SWIR-FD-SPA-SVM) that is computationally light enough for rapid industrial application while maintaining 98.1% accuracy.

Limitations and Future Work

While the results are impressive, the authors note that the study focused on four specific regions in China. To create a truly universal tool, the model would need to be trained on a wider variety of climates and perhaps even wild-harvested vs. farm-grown samples.

The next logical step is the integration of these SWIR-DCNN models into automated sorting hardware, allowing herbal processing facilities to verify the "birth certificate" of every root that passes through their doors in real-time.

Summary updated

Abstract

The composition of <i>Pseudostellaria heterophylla</i> (Tai-Zi-Shen, TZS) is greatly influenced by the growing area of the plants, making it significant to distinguish the origins of TZS. However, traditional methods for TZS origin identification are time-consuming, laborious, and destructive. To address this, two or three TZS accessions were selected from four different regions of China, with each of these resources including distinct quality grades of TZS samples. The visible near-infrared (Vis/NIR) and short-wave infrared (SWIR) hyperspectral information from these samples were then collected. Fast and high-precision methods to identify the origins of TZS were developed by combining various preprocessing algorithms, feature band extraction algorithms (CARS and SPA), traditional two-stage machine learning classifiers (PLS-DA, SVM, and RF), and an end-to-end deep learning classifier (DCNN). Specifically, SWIR hyperspectral information outperformed Vis/NIR hyperspectral information in detecting geographic origins of TZS. The SPA algorithm proved particularly effective in extracting SWIR information that was highly correlated with the origins of TZS. The corresponding FD-SPA-SVM model reduced the number of bands by 77.2% and improved the model accuracy from 97.6% to 98.1% compared to the full-band FD-SVM model. Overall, two sets of fast and high-precision models, SWIR-FD-SPA-SVM and SWIR-FD-DCNN, were established, achieving accuracies of 98.1% and 98.7% respectively. This work provides a potentially efficient alternative for rapidly detecting the origins of TZS during actual production.
BibTeX
@inproceedings{zhang2024non,
  author = {Tingting Zhang and Lu Long and Yihu Song and Minyu Yang and Jing Li and Jiduan Yuan and Yuquan Lin and Xingren Shi and Mingjie Li and Xiaotan Yuan and Zhongyi Zhang and Rensen Zeng and Yuanyuan Song and Li Gu and Yuanyuan Song and Li Gu},
  title = {{Non-destructive identification of Pseudostellaria heterophylla from different geographical origins by Vis/NIR and SWIR hyperspectral imaging techniques}},
  booktitle = {Frontiers in Plant Science},
  year = {2024},
  doi = {10.3389/fpls.2023.1342970},
}
Figure