Non-Covalent Interactions and Helical Packing in Thiophene-Phenylene Copolymers: Tuning Solid-State Ordering and Charge Transport for Organic Field-Effect Transistors

Manikanta Makala, Zhuang Xu, Shamil Saiev, Xiaojuan Ni, Sina Sabury, Veaceslav Coropceanu, Jean‐Luc Brédas, Ying Diao, John R. Reynolds, Oana D. Jurchescu, Anna M. ÖsterholmChemistry 2025 · DOI

TL;DR

This paper explores how subtle changes in conjugated polymer structure, specifically the addition of a single thiophene unit, drastically alter solid-state packing and charge transport. By leveraging non-covalent interactions and thermal annealing, they demonstrate that one polymer (TPT-T) achieves highly ordered, edge-on packing leading to excellent charge mobility, while the other (TPT-2T) develops chirality and a less efficient, more disordered structure.

What Problem Does This Paper Address?

Organic field-effect transistors (OFETs) are promising for flexible electronics, but their performance is heavily reliant on how the semiconducting polymer chains pack in the solid state. Achieving high charge carrier mobility requires well-ordered structures with good π-electron delocalization. However, controlling this solid-state order, especially during film processing, is a significant challenge. This paper addresses how to fine-tune polymer structure to achieve superior solid-state ordering and, consequently, enhanced charge transport in OFETs, focusing on the role of non-covalent interactions in guiding molecular conformation and packing.

Methods

The researchers employed a multi-pronged approach:

  • Computational Modeling: Density Functional Theory (DFT) was used to calculate torsional potential energies of different backbone dihedral angles. All-atom molecular dynamics (MD) simulations were then used to predict the conformational populations and explore how these interactions influence bulk polymer behavior.
  • Synthesis: Two thiophene-phenylene-thiophene (TPT) based polymers, TPT-T and TPT-2T, were synthesized using Stille cross-coupling. The key difference is the incorporation of either a single thiophene (T) or a bithiophene (2T) unit.
  • Material Characterization:
    • Thermal Analysis: Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) were used to understand the thermal transitions and stability of the polymers.
  • Morphological Analysis: Cross-Polarized Optical Microscopy (CPOM) and Grazing-Incidence X-ray Diffraction (GIXD) were crucial for visualizing and quantifying the solid-state ordering, crystallinity, and molecular orientation (e.g., edge-on vs. face-on packing).
  • Spectroscopy: UV-Vis spectroscopy was used to probe electronic conjugation and ordering in solution and solid films.
  • Electrochemistry: Differential Pulse Voltammetry (DPV) and Cyclic Voltammetry (CV) were used to determine ionization potentials.
  • Chirality Detection: Circular Dichroism (CD) spectroscopy was employed to detect the emergence of chirality.
  • Device Fabrication and Testing: OFETs were fabricated using both as-cast and thermally annealed films. Device performance, particularly charge carrier mobility and threshold voltage, was measured.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of novel polymer materials.

Key Insights and Ideas

  • Subtle Structural Changes, Drastic Morphological Differences: The addition of just one thiophene unit (TPT-2T vs. TPT-T) leads to dramatically different solid-state packing and conformational behavior upon annealing. This highlights the sensitivity of polymer self-assembly to molecular architecture.
  • Non-Covalent Interactions as Molecular "Glue": The study emphasizes how intramolecular non-covalent interactions (S…O, OH-C, S…H-C) play a critical role in dictating backbone planarity and influencing the preferred conformations, even before considering intermolecular packing.
  • Annealing as a Morphological Sculptor: Thermal annealing is shown to be a powerful tool for transforming kinetically trapped disordered films into thermodynamically stable, ordered structures. However, the nature of this ordering is polymer-dependent.
  • Emergent Chirality in Achiral Molecules: Remarkably, TPT-2T, composed of achiral building blocks, develops chirality upon annealing, indicating the formation of a helical conformation. This is a fascinating example of how processing can induce complex structural features.
  • Edge-on vs. Face-on Packing is Key: The superior performance of TPT-T is directly linked to its ability to adopt a highly crystalline, edge-on molecular orientation after annealing, which facilitates efficient interchain charge transport. TPT-2T, in contrast, adopts a more isotropic orientation with a preference for face-on alignment, hindering transport.

Key Results

  • TPT-T: Annealing leads to a highly crystalline, planar backbone with predominantly edge-on molecular orientation. This resulted in a significant increase in OFET charge carrier mobility, showing an order of magnitude improvement (from ~1.8 x 10⁻² cm²/Vs to ~1.5 x 10⁻¹ cm²/Vs) and a much narrower mobility distribution.
  • TPT-2T: Annealing leads to a more isotropic molecular orientation, emergent chirality, and a helical conformation. While it showed a lower threshold voltage, its mobility only increased marginally (~1.7 x 10⁻² cm²/Vs to ~3.3 x 10⁻² cm²/Vs) and with a broad distribution, indicating hindered charge transport.
  • Energy Barriers: Computational analysis suggests that TPT-T has a lower energy barrier to adopt a linear, rod-like conformation compared to TPT-2T, which requires overcoming higher barriers and thus favors helical structures.

Limitations and Future Work

  • Limitations:
    • The study focuses on two specific polymers; generalizing these findings to other TPT derivatives or entirely different polymer classes would require further investigation.
  • While OFET performance is reported, other device applications (e.g., photovoltaics, sensors) might be influenced differently by these structural variations.
  • The exact mechanism of emergent chirality in TPT-2T could be further elucidated.
  • Future Work:
    • The authors suggest that these insights provide a roadmap for rational polymer design. Future work could involve exploring other structural modifications to further tune conformation, packing, and ultimately device performance.
  • Investigating the impact of different annealing conditions or processing techniques on these polymers could reveal additional structure-property relationships.
  • Exploring the potential of TPT-2T's helical structure for applications where chirality is beneficial.

Summary updated

Abstract

In this study, we introduce two thiophene-phenylene-thiophene (TPT) polymers designed to leverage noncovalent intramolecular interactions to regulate main-chain conformation and enhance solid-state ordering. By incorporating unsubstituted thiophene (T) or bithiophene (2T) units, we reveal striking divergence in the thermal, morphological, and optoelectronic properties of the resulting films, facilitated by these noncovalent interactions. Using a combination of computational and experimental approaches, we show that annealing yields remarkably different polymer conformations and, consequently, charge transport properties. TPT-T undergoes a significant structural transformation, adopting a more planar backbone conformation and a highly crystalline, edge-on molecular orientation. In contrast, the introduction of a single additional thiophene unit in TPT-2T leads to a more isotropic molecular orientation with a slight preference for face-on alignment, resulting in a heterogeneous film structure that hinders charge transport despite achieving tighter molecular packing. Remarkably, despite being composed of achiral components, TPT-2T develops chirality upon annealing, indicating the formation of a helical conformation. Organic field-effect transistor measurements reveal that the well-ordered alignment in annealed TPT-T films results in higher charge carrier mobility and a narrower distribution of mobility values than in TPT-2T. These findings provide critical insights into the structure-property relationships of conjugated polymers, offering guidance for optimizing molecular design and processing strategies for high-performance organic electronic materials.
BibTeX
@inproceedings{makala2025non,
  author = {Manikanta Makala and Zhuang Xu and Shamil Saiev and Xiaojuan Ni and Sina Sabury and Veaceslav Coropceanu and Jean‐Luc Brédas and Ying Diao and John R. Reynolds and Oana D. Jurchescu and Anna M. Österholm},
  title = {{Non-Covalent Interactions and Helical Packing in Thiophene-Phenylene Copolymers: Tuning Solid-State Ordering and Charge Transport for Organic Field-Effect Transistors}},
  booktitle = {Chemistry},
  year = {2025},
  doi = {10.1021/acs.chemmater.5c00631},
}
Figure