New Cost-Effective Technologies Applied to the Study of the Glacier Melting Influence on Physical and Biological Processes in Kongsfjorden Area (Svalbard)

Lorenzo Pasculli, Viviana Piermattei, Alice Madonia, Gabriele Bruzzone, Massimo Caccia, R. Ferretti, Angelo Odetti, Marco MarcelliJournal of Marine Science and Engineering 2020 · DOI

TL;DR

This paper introduces the Arctic Low-Cost (ArLoC) probe, a new, affordable sensor for monitoring Arctic marine environments, and demonstrates its effectiveness when deployed on the PROTEUS unmanned semi-submersible vehicle. The study reveals significant physical and biological impacts of tidewater glacier melt, including sharp temperature and salinity gradients, increased turbidity, and a substantial phytoplankton bloom, offering unprecedented high-resolution data from previously inaccessible areas.

What Problem Does This Paper Address?

The Arctic is warming at twice the global average rate, leading to significant changes in its marine ecosystems, particularly due to melting glaciers. Understanding these changes is crucial, but monitoring these remote and harsh environments is challenging and expensive. Existing ocean observing systems have limited coverage in the Arctic, and traditional oceanographic instruments are costly and difficult to deploy. This paper addresses the need for more accessible, cost-effective, and autonomous technologies to gather high-resolution data on the physical and biological processes influenced by glacier melt in critical Arctic fjords.

Methods

The core of this research lies in the development and application of the ArLoC (Arctic Low-Cost) probe. This probe is designed for easy integration into various platforms and measures temperature, pressure, and chlorophyll a fluorescence. The ArLoC probe was integrated onto the PROTEUS (Portable RObotic Technology for Unmanned Surveys), an unmanned semi-submersible vehicle. This combination allowed for autonomous data collection in challenging near-glacier environments. Two scientific campaigns were conducted in Kongsfjorden, Svalbard, in 2018. Data collected included temperature, salinity (using an Idronaut 305 Plus CTD), and turbidity (using a Turbidimeter Cyclops-7 Turner Design). The data were synchronized, saved, and analyzed using specialized software, with profiles visualized using Ocean Data View.

Datasets

The study utilized data collected during two field campaigns in Kongsfjorden, Svalbard, in June 2018. The data collected included:

  • Temperature
  • Salinity
  • Chlorophyll a fluorescence
  • Turbidity
  • Depth
  • GPS position (for surface vehicle)

No pre-existing datasets were used for training or evaluation; the study focused on novel data acquisition in a specific Arctic region.

Key Insights and Ideas

  • Cost-effective monitoring is feasible in extreme environments: The ArLoC probe and PROTEUS platform demonstrate that advanced oceanographic data can be collected affordably and autonomously in challenging Arctic conditions.
  • Glacier melt has profound and immediate impacts: The study highlights how tidewater glacier melting directly influences water column properties, creating sharp gradients and affecting biological productivity.
  • Subglacial plumes are a significant transport mechanism: The observation of a cold water plume rising from the seabed near Kongsbreen glacier illustrates a key process for transporting meltwater and associated materials to the surface.
  • Phytoplankton blooms are strongly linked to glacier melt: The research observed a massive phytoplankton bloom, suggesting that nutrients released by subglacial discharge are a primary driver of primary productivity in these areas.
  • Turbidity can limit phytoplankton growth: Despite high nutrient availability, high turbidity near glacier fronts can limit light penetration, potentially hindering phytoplankton growth in certain zones.
  • Different glacier dynamics lead to different oceanographic responses: The contrast between Kongsbreen (showing a plume) and Conwaybreen (lacking a clear plume, possibly due to recession) illustrates how glacier behavior influences the local marine environment.

Key Results

  • The ArLoC probe proved to be an easy-to-integrate and reliable instrument, enabling high spatial resolution investigations.
  • Significant temperature and salinity gradients were observed near glacier fronts, indicating strong mixing and stratification.
  • A chlorophyll a peak of 10.18 µg/L was recorded near Kongsbreen glacier, and an even higher peak of 36.59 µg/L was observed near Conwaybreen glacier, indicating a massive phytoplankton bloom.
  • Turbidity values reached up to 100 NTU near glacier fronts, particularly in the upper layers, suggesting a high concentration of suspended matter.
  • The ArLoC probe's temperature data showed a high correlation (R² = 0.95) with data from a commercial Idronaut probe, validating its accuracy.
  • The study identified three main water masses in the fjord: Surface Water (SW), Intermediate Water (IW), and Local Water (LW).

Limitations and Future Work

The authors acknowledge that this work represents a preliminary study and provides "first-hand observations." While the ArLoC probe demonstrated effectiveness, further validation and calibration across a wider range of conditions would be beneficial. The study focused on two specific glacier fronts, and future work should expand to cover more areas to gain a comprehensive understanding of Arctic fjord dynamics. The authors emphasize the need for improved future prospects in monitoring extreme environments and performing widespread measurements to study below-surface variables. They advocate for the continued development of autonomous platforms and cost-effective sensors to enable efficient data collection for biological measurements and model validation, particularly for understanding the complex interactions between glacier melt, water properties, and phytoplankton dynamics.

Summary updated

Abstract

The Arctic region is greatly affected by climate change, with evident alterations in both physical and biological processes: temperatures are changing at a rate that is twice the global average and phytoplankton productivity is directly affected by ice melting. Continuous monitoring of this ecosystem is fundamental to gain greater understanding of the impact of changes on the natural environment, but the Global Ocean Observing System only provides partial coverage in these extreme areas, which are particularly difficult to reach. Technological progress in oceanographic measurement capabilities is indispensable for the implementation of marine observatories, especially in these remote regions. In recent years, autonomous systems and cost-effective technologies have proved to be valuable for increasing spatial and temporal coverage of data. This is the case with the innovative ArLoC (Arctic Low-Cost) probe, which was designed and developed for easy integration into various types of platforms, enabling continuous measurement of temperature, pressure and fluorescence of chlorophyll a. This work reports on the results of two scientific campaigns carried out in Kongsfjorden (Svalbard Islands) in 2018 in the framework of the UVASS (Unmanned Vehicles for Autonomous Sensing and Sampling) research project. The ArLoC probe was integrated onboard the PROTEUS (Portable RObotic TEchnology for Unmanned Surveys) unmanned semi-submersible vehicle and this allowed us to collect important data in the stretches of sea near tidewater glacier fronts. The acquired data showed several significant effects of glacier melting such as: high temperature and salinity gradients, which cause considerable variations in water mass stratification, and an increase in turbidity and the chlorophyll a concentration, which directly affects primary productivity and the trophic chain. During the surveys, ArLoC proved to be an easy-to-integrate, very reliable instrument, which permitted high spatial resolution investigation of ecological processes during glacier melting as never studied before.
BibTeX
@article{pasculli2020new,
  author = {Lorenzo Pasculli and Viviana Piermattei and Alice Madonia and Gabriele Bruzzone and Massimo Caccia and R. Ferretti and Angelo Odetti and Marco Marcelli},
  title = {{New Cost-Effective Technologies Applied to the Study of the Glacier Melting Influence on Physical and Biological Processes in Kongsfjorden Area (Svalbard)}},
  journal = {Journal of Marine Science and Engineering},
  year = {2020},
  doi = {10.3390/jmse8080593},
}
Figure