Abstract
A pair of tri-band multiple-input-multiple-output (MIMO) antennas with high isolation is investigated in this paper. The proposed antenna consists of two monopole antenna elements with an edge-to-edge spacing of 4 mm ($0.03~\lambda _{0}$ at 2.3 GHz). The monopole antenna element utilizes a bending line structure to operate in three bands while achieving miniaturization. To achieve compact dimensions and high isolation, a symmetrical distribution layout is adopted to decouple the low-frequency band. A U-shaped neutralization line (NL) contacting two microstrip lines improves isolation in the high-frequency band, while an inverted U-shaped NL contacting the radiation patches decouples the middle-frequency band. The design achieves a low envelope correlation coefficient (ECC) and a quasi-omnidirectional radiation pattern, indicating satisfactory diversity performance for portable MIMO applications.
Introduction: The Challenge of Mutual Coupling
Modern wireless communication relies heavily on Multiple-Input Multiple-Output (MIMO) technology to increase data rates and link reliability. However, as mobile devices continue to shrink, antenna elements must be placed in increasingly close proximity. This proximity leads to mutual coupling—electromagnetic interference between antennas that degrades system performance.
While techniques like defected ground structures or electromagnetic band-gap structures exist to mitigate this, they are often bulky or complex to fabricate. This research addresses the challenge of achieving high isolation across three distinct frequency bands (2.3, 3.5, and 5.7 GHz) within an extremely compact footprint without compromising radiation efficiency or coverage.
Design Methodology
The proposed system uses two symmetric monopole antennas with a "bending line" structure for miniaturization. The core innovation lies in a multi-pronged decoupling strategy targeting three specific bands:
- Symmetrical Layout: Placing the antennas in a back-to-back symmetrical arrangement naturally helps decouple the low-frequency band (2.3 GHz).
- Dual Neutralization Lines (NLs): Two distinct NLs are employed. A U-shaped NL connects the microstrip feed lines to isolate the high-frequency band (5.7 GHz). An inverted U-shaped NL connects the radiation patches to decouple the middle-frequency band (3.5 GHz).
- Phase Cancellation: These lines introduce a current 180 degrees out of phase with the existing coupling current, effectively neutralizing the interference.
By placing NLs at different physical points (feed line vs. radiation patch), the researchers tuned each structure to a specific frequency without disrupting the others. The antennas are separated by only 4mm, a mere 0.03 $\lambda_0$ at the lowest operating frequency.
Performance Evaluation
The design was optimized using HFSS and verified with a prototype on an FR4 substrate. The results demonstrated significant performance gains:
- Isolation Improvement: The addition of NLs improved isolation by approximately 14 dB. Final isolation values exceeded 18 dB at 2.3 GHz, 32 dB at 3.5 GHz, and 24 dB at 5.7 GHz.
- Envelope Correlation Coefficient (ECC): The ECC remained below 0.02 across all bands, far exceeding the standard requirement of < 0.5 for MIMO systems.
- Radiation Characteristics: The system achieved a diversity gain close to the ideal 10 dB, with a quasi-omnidirectional H-plane radiation pattern suitable for portable electronics.
Conclusion
This dual-NL technique provides a robust solution for high-isolation, tri-band MIMO systems in compact devices. While the neutralization lines can slightly narrow operating bandwidth due to added inductance, the overall performance meets the rigorous demands of modern wireless standards. Future work may explore scaling this technique for higher-order MIMO arrays within densely packed smartphone chassis.
Summary updated