TL;DR
This paper introduces a refined "action spectroscopy" technique to accurately measure the near-ultraviolet (UV) photolysis cross-sections of atmospheric peroxides, specifically methyl hydroperoxide (MHP) and hydroxymethyl hydroperoxide (HMHP). These measurements are crucial for understanding the atmospheric lifetimes and roles of these compounds, with the new data showing good agreement with existing absorption cross-section measurements.
What Problem Does This Paper Address?
Atmospheric lifetimes and chemical fates of many important molecules are dictated by their photolysis rates, which in turn depend on their absorption cross-sections at wavelengths longer than 305 nm (the "ozone cut-off"). However, measuring these cross-sections in the near-UV region is challenging because they are often very small (on the order of 10⁻²³ cm² molecule⁻¹ or less). This makes it difficult to separate the target molecule's absorption from that of impurities, especially when both have broad, unstructured spectra. Furthermore, the atmospherically relevant quantity is the photodissociation cross-section, which requires knowing both the absorption cross-section and the quantum yield of the photodissociation process. This paper addresses the need for a more direct and accurate method to measure these near-UV photodissociation cross-sections for key atmospheric species.
Methods
The authors employ action spectroscopy, a technique that directly measures photodissociation cross-sections. Instead of measuring light absorption, they monitor the yield of a specific photodissociation product – in this case, the hydroxyl radical (OH) – as a function of the excitation wavelength. This is achieved using laser-induced fluorescence (LIF) to detect the OH radicals. LIF is advantageous because it offers a very low background signal, allowing for sensitive detection.
The experimental setup involves a tunable laser system to generate the photolysis light in the near-UV range (305–365 nm) and a separate laser system to probe the OH radicals. The OH LIF signal is measured at a specific time delay after the photolysis pulse. To obtain absolute cross-sections, the technique relies on a reference species, hydrogen peroxide (H₂O₂), which has well-characterized absorption cross-sections and a known quantum yield of 2 for producing two OH radicals upon photolysis. By comparing the OH LIF signal from the target peroxide to that from H₂O₂, and using a ratio equation, the authors can cancel out wavelength-dependent instrumental factors, simplifying the measurement.
Datasets
The paper does not introduce new datasets in the machine learning sense. Instead, it relies on:
- Experimental data: Photolysis product (OH) yields measured in their laboratory setup.
- Reference data: Well-established absorption cross-section data for hydrogen peroxide (H₂O₂) from sources like the HITRAN database and literature values from Nicovich and Wine (1988) and Knight et al. (2002).
- Literature data: Previously published absorption cross-section data for MHP (Vaghjiani and Ravishankara, 1989a; Matthews et al., 2005; Blitz et al., 2005) and HMHP (Bauerle and Moortgat, 1999) for comparison.
Key Insights and Ideas
- Action spectroscopy as a powerful tool: The study demonstrates the efficacy of action spectroscopy for measuring weak near-UV photodissociation cross-sections, offering a direct route to the atmospherically relevant quantity.
- OH LIF for sensitive detection: Laser-induced fluorescence of OH radicals provides a highly sensitive and low-background method for monitoring photodissociation, crucial for detecting low yields.
- Importance of near-UV photolysis: The research highlights that even weak absorption in the near-UV region can significantly contribute to the overall atmospheric photolysis rates of peroxides, impacting their atmospheric lifetimes and roles.
- Addressing data discrepancies: The work provides new measurements that help to resolve some discrepancies in existing literature data for MHP and HMHP, particularly at longer wavelengths.
Key Results
- The paper successfully measured the near-UV photolysis cross-sections for methyl hydroperoxide (MHP) and hydroxymethyl hydroperoxide (HMHP) in the 305–365 nm wavelength range.
- The measured cross-sections for MHP are in good agreement with previous absorption cross-section measurements, showing an 8–21% difference compared to Vaghjiani and Ravishankara (1989a).
- For HMHP, the new measurements show reasonable agreement with Bauerle and Moortgat (1999) between 310 and 340 nm, though the authors' values are lower at longer wavelengths, potentially due to impurities in the literature data.
- The study suggests that their new measurements could lead to an approximate 20% increase in the estimated total UV photolytic loss of MHP compared to previous estimates.
Limitations and Future Work
- Systematic Error: The authors acknowledge that systematic errors, particularly those related to uncertainties in the infrared extinction coefficients used for concentration determination, are a significant source of uncertainty in their absolute photolysis cross-section values.
- Impurities: While efforts were made to purify HMHP, the presence of H₂O₂ impurities was unavoidable and could influence the measurements.
- Extrapolation: For atmospheric relevance, cross-sections were extrapolated to 400 nm. The accuracy of these extrapolations can introduce uncertainty.
- Future Work: The authors recommend averaging their data with existing literature data to mitigate systematic errors. Further investigation into the impact of lower temperatures on MHP photodissociation was hinted at as a potential area for future study. They also note that no LIF signal was detected for MHP or HMHP in the 430–550 nm range, consistent with theoretical calculations.
Summary updated