Near-infrared photodetectors based on mercury indium telluride single crystals

Xiao-Lei Zhang, Weiguo Sun, Zhengxiong Lu, Liang Zhang, Zhao Lan, Jiaxin Ding, Guoqing YanProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2007 · DOI

Abstract

Attempt to form the Schottky barrier on mercury indium telluride (MIT) surface by deposition transparent conducting electrode (TCE) and avoid the negative results by non-rectifier contacts nature, we have investigated the oxidation of clean MIT surfaces to form an insulating layer to overcome this disadvantage by metal-insulator-semiconductor (MIS) photodetectors designing. Oxide film is grown on the MIT surface by plasma enhance chemical vapor deposition (PECVD). Previously cleaned MIT wafers were dipped and boiled in solution, which consists of mixture of bromine and an organic solvent in ratio of 1:50. By the way of using these films as intermediate slightly conducting insulator, a fast-response MIT based surface-barrier photodetectors have been developed. Pt films were used as TCE frontal electrode by vacuum magnetron sputtering (VMS). The current-voltage characteristic is described quantitatively based on the energy diagram and the found parameters of the Schottky barrier. Details of oxidation process, Schottky diodes, as well as the photodetectors fabrication and characterizations are discussed.
BibTeX
@inproceedings{zhang2007near,
  author = {Xiao-Lei Zhang and Weiguo Sun and Zhengxiong Lu and Liang Zhang and Zhao Lan and Jiaxin Ding and Guoqing Yan},
  title = {{Near-infrared photodetectors based on mercury indium telluride single crystals}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2007},
  doi = {10.1117/12.756473},
}

Loading related content...

Figure