TL;DR
This paper uses in situ Small-Angle X-ray Scattering (SAXS) to reveal the nanoscale structural evolution of Mg(NH3)6Cl2 during ammonia desorption. The study identifies the formation of intermediate Mg(NH3)2Cl2 crystallites and the subsequent development of a porous MgCl2 structure, which is crucial for understanding the material's fast reloading capabilities for hydrogen storage.
What Problem Does This Paper Address?
The transport sector's demand for efficient hydrogen storage materials necessitates high volumetric and gravimetric capacity, rapid reversibility, and low desorption temperatures. While complex metal hydrides are promising, indirect hydrogen storage via ammonia in salts like Mg(NH3)6Cl2 offers a safer alternative to liquid ammonia. However, a detailed understanding of the nanoscale structural changes during ammonia desorption is critical for optimizing the material's cyclic, kinetic, and thermodynamic properties. This paper aims to provide this nanoscale insight by investigating the formation and stability of intermediate phases and porosity during thermal decomposition.
Methods
The primary technique employed is in situ Small-Angle X-ray Scattering (SAXS). This method allows for the real-time observation of structural changes at the nanoscale (a few nanometers to tens of nanometers) as the material undergoes thermal decomposition. The SAXS measurements were conducted using a pinhole camera with a specific q-range (3x10⁻³ to 8x10⁻² Å⁻¹) using Cu Kα radiation.
The scattering data was analyzed using the unified equation proposed by Beaucage and Schaefer, which describes scattering from multiple non-interrelated structural levels with characteristic radii of gyration (Rg). This equation allows for the modeling of complex structures involving Guinier regimes (describing low-q scattering of structural levels) and power-law regimes (describing surface scattering).
Additionally, Synchrotron X-ray Powder Diffraction (XRPD) data was used to complement the SAXS findings, particularly for determining crystallite sizes using the Scherrer equation.
Datasets
Not discussed in the paper. The study relies on experimental data collected from the Mg(NH3)6Cl2 sample itself during the in situ experiments.
Key Insights and Ideas
- Intermediate Phase Formation: The thermal decomposition is not a direct conversion from Mg(NH3)6Cl2 to MgCl2. Instead, an intermediate phase, Mg(NH3)2Cl2, forms first, characterized by the growth of polydisperse spherical crystallites.
- Skeletal Structure and Porosity: As ammonia desorbs, these Mg(NH3)2Cl2 crystallites agglomerate, forming a skeletal structure with significant nanoscale porosity. This porosity, with channels of 25-30 nm wide, is hypothesized to be key to the material's rapid reloading of ammonia.
- Pore Evolution: The pore structure develops at temperatures above 249 °C, with the average pore radius increasing significantly. The polydispersity index (PDI) of the pores shows a decrease at higher temperatures, suggesting a stabilization of pore size.
- Implications for Hydrogen Storage: The observed structural evolution, particularly the formation of a porous network within the aggregated MgCl2, provides a nanoscale explanation for the material's ability to maintain its macroscopic shape and undergo fast, reversible ammonia uptake and release.
Key Results
- At 146 °C, the formation of Mg(NH3)2Cl2 crystallites is observed, with a Guinier regime appearing in the SAXS data. The radius of gyration (Rg,1) for these crystallites increases with temperature, reaching over 40 nm at 268 °C.
- A second Guinier regime, attributed to porosity, emerges at temperatures above 249 °C. The radius of gyration for these pores (Rg,2) is found to be between 12-17 nm.
- XRPD data indicates crystallite sizes of approximately 60 nm for Mg(NH3)6Cl2, 55 nm for Mg(NH3)2Cl2, and 45 nm for MgCl2.
- The volume of voids/pores increases dramatically during decomposition, from 5% in the initial Mg(NH3)6Cl2 to 55% in Mg(NH3)2Cl2 and 71% in MgCl2.
- The study suggests that the skeletal aggregate structure with narrow and elongated pores explains why Mg(NH3)6Cl2 is easily reloaded and retains its macroscopic structure.
Limitations and Future Work
- Discrepancy with BJH Analysis: The authors note a discrepancy between their SAXS findings and previous BJH analysis regarding pore structure, attributing it to simplifications in the unified equation and different probing methods.
- Non-conclusive PDI Analysis: The interpretation of the PDI for pores is noted as non-conclusive due to the restricted use of the unified equation.
- Future Work: The paper suggests that this increased understanding of ammonia de-/absorption in Mg(NH3)6Cl2 can lead to superior functionality of metal ammines as indirect hydrogen carriers and SCR materials. Further research could focus on refining the pore structure analysis and exploring the impact of different synthesis or processing methods on the nanoscale structural evolution.
Summary updated