MyoSuite - A contact-rich simulation suite for musculoskeletal motor control

Vittorio Caggiano, Huawei Wang, Guillaume Durandau, Massimo Sartori, Vikash KumararXiv 2022 · DOI · arXiv

Introduction

MyoSuite is a high-performance simulation framework designed to bridge the gap between physiological musculoskeletal modeling and modern reinforcement learning (RL). By integrating complex biological models into the MuJoCo physics engine, MyoSuite achieves simulation speeds up to 4,000x faster than traditional biomechanical tools. This efficiency enables the training of AI agents to perform intricate, contact-rich tasks such as twirling a pen or rotating Baoding balls, which were previously computationally prohibitive.

The Musculoskeletal Simulation Gap

Traditionally, biomechanics and Artificial Intelligence have operated in separate domains. Biomechanics relies on tools like OpenSim, which offer high physiological accuracy but suffer from slow computation and difficulty handling "contact-rich" interactions, such as a hand grasping an object. Conversely, AI researchers utilize benchmarks like OpenAI Gym, which are fast but use simplified "robot-like" joints. These simplifications ignore critical biological realities: muscles only pull (they don't push), they are redundant, and they fatigue over time.

Comparison of MyoSuite with existing simulation frameworks across contact dynamics, muscle modeling, and speed.

This disconnect hinders the development of AI for rehabilitation, prosthetic design, and humanoid robotics. MyoSuite addresses this by providing a platform that is both physiologically grounded and computationally efficient enough for deep RL.

Methods: The MyoSim Pipeline

The core of the framework is the MyoSim pipeline, an automated toolset that converts validated OpenSim models into MuJoCo-compatible versions. The pipeline involves three primary optimization steps:

  1. Geometry Transfer: Mapping bone structures and muscle attachment points.
  2. Moment Arm Optimization: Using Simulated Annealing to ensure the mechanical advantage of muscles matches biological data.
  3. Muscle Force Optimization: Using Differential Evolution to align the force-length-velocity properties with Hill-type muscle models.

The suite features three primary models: MyoFinger (4 DoF), MyoElbow (1 DoF), and the complex MyoHand (23 joints, 39 muscles). It also incorporates "non-stationary" biological features such as muscle fatigue, sarcopenia (age-related muscle loss), and surgical alterations like tendon transfers.

Datasets and Benchmarks

MyoSuite introduces a comprehensive benchmark of 204 tasks across 9 families, ranging from simple reaching to complex dexterous manipulation.

Visual representation of the diverse task families in MyoSuite, including reaching, key turning, and Baoding ball rotation.

Tasks are categorized by difficulty (Easy vs. Hard) and non-stationarity (fatigue, sarcopenia, tendon tears). Baseline results using the Natural Policy Gradient (NPG) algorithm demonstrate that while these tasks are solvable, they are significantly more challenging than standard robotics benchmarks due to the "pull-only" nature of muscles and high dimensionality.

Key Results and Clinical Relevance

  • Performance and Fidelity: MyoSuite is 60x to 4,000x faster than OpenSim. While OpenSim's computation time increases exponentially with muscle count, MyoSuite scales linearly. Despite this speed, models maintain high accuracy, with Root Mean Square (RMS) errors for muscle forces at only ~2-4% compared to gold-standard models.
  • Complex Task Success: Agents successfully learned complex behaviors, such as the Baoding ball task, although it required over 70 million samples, highlighting the difficulty of musculoskeletal control.
  • Clinical Insights: The platform can simulate clinical scenarios. For instance, a policy trained on a healthy elbow fails under sarcopenia but can recover by learning to use synergistic muscles to compensate for weakness.

Conclusion

While these models are first-iteration approximations based on cadaveric data, they represent a significant step forward in motor control research. Future work includes expanding to lower-limb models for gait analysis and conducting in silico clinical trials to predict the outcomes of surgeries or exoskeleton designs before human implementation.

Summary updated

Abstract

Embodied agents in continuous control domains have had limited exposure to tasks allowing to explore musculoskeletal properties that enable agile and nimble behaviors in biological beings. The sophistication behind neuro-musculoskeletal control can pose new challenges for the motor learning community. At the same time, agents solving complex neural control problems allow impact in fields such as neuro-rehabilitation, as well as collaborative-robotics. Human biomechanics underlies complex multi-joint-multi-actuator musculoskeletal systems. The sensory-motor system relies on a range of sensory-contact rich and proprioceptive inputs that define and condition muscle actuation required to exhibit intelligent behaviors in the physical world. Current frameworks for musculoskeletal control do not support physiological sophistication of the musculoskeletal systems along with physical world interaction capabilities. In addition, they are neither embedded in complex and skillful motor tasks nor are computationally effective and scalable to study large-scale learning paradigms. Here, we present MyoSuite -- a suite of physiologically accurate biomechanical models of elbow, wrist, and hand, with physical contact capabilities, which allow learning of complex and skillful contact-rich real-world tasks. We provide diverse motor-control challenges: from simple postural control to skilled hand-object interactions such as turning a key, twirling a pen, rotating two balls in one hand, etc. By supporting physiological alterations in musculoskeletal geometry (tendon transfer), assistive devices (exoskeleton assistance), and muscle contraction dynamics (muscle fatigue, sarcopenia), we present real-life tasks with temporal changes, thereby exposing realistic non-stationary conditions in our tasks which most continuous control benchmarks lack.
BibTeX
@misc{caggiano2022myosuite,
  author = {Vittorio Caggiano and Huawei Wang and Guillaume Durandau and Massimo Sartori and Vikash Kumar},
  title = {{MyoSuite - A contact-rich simulation suite for musculoskeletal motor control}},
  year = {2022},
  eprint = {2205.13600},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2205.13600},
}
Figure