TL;DR
This paper introduces a novel multiscale modeling framework to accurately predict the electrical conductivity of graphene-reinforced polymer nanocomposites. By incorporating the quantum mechanical "tunnelling effect" and a sophisticated finite element method, the authors can now explain the observed nonlinear electrical behavior and significantly lower percolation thresholds in these materials.
What Problem Does This Paper Address?
Graphene-reinforced polymer nanocomposites are highly sought after for their enhanced electrical properties. However, experimental observations have revealed two puzzling phenomena: a nonlinear current-voltage relationship and unexpectedly high conductivity even at low graphene concentrations. Traditional models struggle to capture these effects, particularly the "tunnelling effect," where electrons can quantum mechanically tunnel across thin polymer layers between graphene sheets. This paper aims to bridge this gap by developing a computational model that explicitly accounts for this tunnelling phenomenon and its impact on the overall conductivity.
Methods
The authors propose a multiscale modeling framework that combines a 3D tunnelling effect model with a finite element method (FEM).
- 3D Tunnelling Effect Model: They extend a 1D tunnelling model to 3D by defining a novel "distance function" that quantifies the proximity between graphene sheets. This function is crucial for determining where the tunnelling effect becomes significant.
- Nonlinear FEM Formulation: A nonlinear FEM formulation is developed to solve the electrical problem, incorporating the nonlinear conduction mechanisms introduced by tunnelling.
- Surface Model for Graphene: To avoid the computational burden of meshing the extremely thin graphene sheets, they are modeled as highly conducting surfaces. This approach simplifies the model while still capturing their electrical contribution.
- Homogenization Procedure: A homogenization technique is used to upscale the local microscopic behavior (tunnelling effect) to predict the macroscopic effective conductivity of the composite.
- Newton-Raphson Procedure: Due to the inherent nonlinearity of the problem, a Newton-Raphson iterative method is employed to solve the system of equations.
Datasets
Not discussed in the paper. The study relies on numerical simulations and comparisons with existing experimental and analytical results.
Key Insights and Ideas
- Tunnelling Effect is Key: The paper strongly suggests that the quantum tunnelling effect is the primary mechanism responsible for the observed nonlinear electrical behavior and low percolation thresholds in graphene-polymer nanocomposites.
- Nonlinear Conductivity: The model demonstrates that the effective conductivity is not a simple linear function of the electric field, especially at higher field strengths, due to the tunnelling mechanism.
- Percolation Threshold Explained: The framework successfully predicts a significantly lower percolation threshold (around 0.8 vol%) compared to what might be expected from purely conductive pathways, aligning well with experimental findings.
- Importance of Microstructure: The study highlights how the spatial arrangement and proximity of graphene sheets, captured by the distance function, critically influence the overall conductivity.
Key Results
- Qualitative Agreement: The numerical predictions for effective conductivity and percolation thresholds show good qualitative agreement with available experimental data.
- Tunnelling Effect Magnitude: The simulations reveal that the tunnelling current can be orders of magnitude larger than the current in the polymer matrix alone, explaining the significant increase in composite conductivity.
- Benchmark Validation: A 1D benchmark problem demonstrates good agreement between the numerical solution and analytical estimates for tunnelling current density and effective conductivity.
- RVE Size Convergence: The study shows that the effective conductivity converges for Representative Volume Elements (RVEs) of approximately 80 nm, providing a practical size for simulations.
- Influence of Parameters: The results illustrate how factors like the distance between graphene sheets and the energy barrier height significantly impact the conductivity.
Limitations and Future Work
- Approximations: The model relies on certain assumptions, such as neglecting bulk-limited conduction mechanisms in the polymer and approximating the trapezoidal barrier as rectangular.
- Distance Function Definition: The paper acknowledges that the proposed distance function is one possible choice among many, and other definitions could be explored.
- Experimental Validation: While qualitative agreement with experimental data is shown, direct quantitative validation with specific experimental datasets would strengthen the findings.
- Future Work: The authors suggest that this framework can be extended to analyze the effects of various microstructural parameters on conductivity and to design materials with enhanced performance. Further investigation into the influence of graphene sheet shape, orientation, and surface functionalization could also be valuable.
Summary updated