Multiple Physical Quantities Janus Metastructure Sensor Based on PSHE

Junyang Sui, Jie Xu, Aowei Liang, Jiahao Zou, Chuanqi Wu, Tinghao Zhang, Haifeng Zhang2023 · DOI

TL;DR

This paper introduces a novel Janus metastructure sensor (JMS) that leverages the photonic spin Hall effect (PSHE) to simultaneously detect multiple physical quantities—refractive index (RI), thickness, and angle—with high sensitivity. By exploiting the asymmetric Janus design and tunable graphene properties, this sensor offers a broader detection range and improved accuracy compared to traditional single-function sensors, paving the way for advanced multiscenario applications.

What Problem Does This Paper Address?

The field of sensing is constantly seeking devices that can measure multiple parameters simultaneously with high precision and across a wide range of values. Traditional sensors often specialize in detecting a single physical quantity, leading to a need for multiple devices or complex systems for comprehensive analysis. Furthermore, achieving high sensitivity and a broad detection range for these quantities, especially in the terahertz (THz) spectrum, presents a significant challenge. This paper addresses the limitations of single-function sensors by proposing a "Janus" metastructure—a material engineered at the sub-wavelength scale with different properties on opposite sides—that can interact with electromagnetic waves differently depending on the direction of incidence. This inherent asymmetry, combined with the tunable properties of graphene and the sensitivity of the photonic spin Hall effect (PSHE), allows for the simultaneous detection of multiple physical quantities with enhanced performance.

Methods

The core of this research lies in the design and theoretical analysis of a Janus metastructure sensor (JMS). The Janus property is achieved by an asymmetric arrangement of dielectric layers (Dielectric A and Dielectric B) and a graphene layer, breaking the structural parity. This asymmetry causes electromagnetic waves (EWs) to exhibit different behaviors when incident from opposite directions.

The detection mechanism relies on the Photonic Spin Hall Effect (PSHE), which causes a spatial separation of left- and right-handed circularly polarized light components upon reflection. This separation, or displacement, is highly sensitive to changes in the physical parameters being measured. The researchers enhance this effect by incorporating a graphene layer, whose conductivity and thus its effective dielectric constant can be tuned by an external voltage (chemical potential, $\mu_c$).

The theoretical model involves:

  • Transfer Matrix Method: Used to calculate the reflection and transmission coefficients of the multilayered structure.
  • Graphene Conductivity Model: An established formula is used to describe the conductivity of graphene as a function of frequency, temperature, and chemical potential.
  • PSHE Displacement Calculation: The lateral displacement of the spin-polarized beams is derived based on the Fresnel reflection coefficients and the incident angle.

By locking the incident angle corresponding to the peak of the PSHE displacement ($\delta_{H^-}$), the sensor can simultaneously detect changes in refractive index (RI), thickness, and angle. The paper explores both forward and backward propagation of EWs, demonstrating different sensing characteristics for each direction.

Datasets

Not discussed in the paper. The research is primarily theoretical and relies on simulations and calculations based on established physical models.

Key Insights and Ideas

  • Janus Metamaterial for Dual-Direction Sensing: The asymmetric Janus design is crucial for enabling different sensing performances for forward and backward incident waves, effectively broadening the overall detection capabilities.
  • Graphene Tunability for Enhanced PSHE: The ability to tune the chemical potential of graphene is key to optimizing the PSHE and achieving high sensitivity for various physical quantities. A specific $\mu_c$ of 0.6 eV was found to yield optimal sensing performance.
  • Simultaneous Multi-Quantity Detection: The sensor can detect RI, thickness, and angle concurrently by monitoring the PSHE displacement peak and its corresponding incident angle. This is a significant departure from traditional single-parameter sensors.
  • Broadened Detection Range and Improved Accuracy: By utilizing both forward and backward propagation, the sensor achieves a wider overall detection range for each parameter. Furthermore, comparing forward and backward measurements for the same physical quantity can serve as a cross-verification, enhancing detection accuracy.
  • High Sensitivity in THz Range: The proposed sensor demonstrates high sensitivities for all detected parameters across different detection ranges, making it suitable for precise measurements in the THz spectrum.

Key Results

The JMS demonstrates impressive performance in detecting multiple physical quantities:

  • Refractive Index (RI) Detection:
    • Forward: Range 2~2.4, Sensitivity (S) = 81.35°/RIU.
  • Backward: Range 2~2.09, S = 99.3°/RIU.
  • Thickness Detection:
    • Forward: Range 2~2.35 µm, S = 64.84°/µm.
  • Backward: Range 1.85~2.02 µm, S = 70.07°/µm.
  • Angle Detection:
    • Forward: Range 27°~47°, S = 0.02238 THz/°.
  • Backward: Range 20°~40°, S = 0.02348 THz/°.

The paper also highlights excellent linearity (R² values close to 0.99) in the measured relationships between the PSHE displacement and the physical quantities, indicating reliable detection.

Limitations and Future Work

  • Theoretical Study: The current work is a theoretical proposal. Experimental fabrication and validation are necessary to confirm the predicted performance.
  • Specific $\mu_c$ Optimization: While $\mu_c = 0.6$ eV was identified as optimal for sensing performance, the practical implementation of achieving and maintaining this specific chemical potential in a real-world device might pose engineering challenges.
  • Environmental Factors: The study assumes operation in air at room temperature. The performance under different environmental conditions (e.g., humidity, temperature variations) is not explored.
  • Future Work: The authors suggest that this multiscale and multifunctional JMS, with its advantages of high sensitivity, label-free operation, non-destructive nature, and real-time monitoring, can be applied to a variety of application scenarios and offers a new design paradigm for novel multifunction devices. Further research could focus on experimental realization and exploring applications in fields like chemical sensing, biological detection, and material characterization.

Summary updated

BibTeX
@misc{sui2023multiple,
  author = {Junyang Sui and Jie Xu and Aowei Liang and Jiahao Zou and Chuanqi Wu and Tinghao Zhang and Haifeng Zhang},
  title = {{Multiple Physical Quantities Janus Metastructure Sensor Based on PSHE}},
  year = {2023},
  doi = {10.3390/s23104747},
}
Figure