Multifunctional optical waveguide chips

Jianyi Yang, Feng Zhao, Dechang An, Ray T. ChenProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2002 · DOI

TL;DR

This paper explores the monolithic integration of various optical waveguide components onto a single chip using polymeric materials. The authors demonstrate the fabrication of multifunctional chips that combine optical modulation and amplification, as well as components for WDM systems and photonic phased-array antennas, paving the way for more compact and sophisticated optical devices.

What Problem Does This Paper Address?

The dream of integrated optical circuits, akin to integrated electronic circuits, has been around since the 1960s. However, realizing this vision is challenging because different optical components (like light sources, modulators, amplifiers, and detectors) often require vastly different materials and fabrication processes. This makes it difficult to integrate them onto a single substrate. This paper tackles this challenge by focusing on polymeric materials, which offer a promising platform for integrating multiple optical functions onto a single chip, thereby reducing complexity, cost, and size for applications in optical communications and radar systems.

Methods

The core of this work lies in leveraging the versatility of polymeric materials for monolithic integration. The authors explore two main avenues:

  • Combining Modulation and Amplification: They propose co-doping a polymer backbone with electro-optic (EO) chromophores for modulation and rare-earth ions for amplification. This allows for the creation of a single chip that can both modulate and amplify optical signals. The EO effect is achieved through contact poling, and rare-earth ions are used for optical gain.
  • Exploring New Waveguide Functions: The paper investigates how optical waveguides can be designed with specialized functions for specific applications. This includes:
  • Waveguide Concentrators for WDM: To improve the performance of WDM multiplexers/demultiplexers, they integrate waveguide concentrators. These structures reduce the spacing between waveguides at the focal plane of WDM optics, thereby increasing the channel passband and reducing insertion loss. Air trenches are used to mitigate crosstalk.
  • True-Time-Delay (TTD) Modules for Phased-Array Antennas: For phased-array radar systems, TTD modules are crucial for eliminating beam-squint. The authors propose using photolithographically defined polymer waveguides of varying lengths as delay lines, controlled by thermo-optic (TO) switches. This approach offers higher precision and eliminates complex fiber optic packaging.

Datasets

Not discussed in the paper. The paper focuses on experimental fabrication and characterization of fabricated chips.

Key Insights and Ideas

  • Polymeric Materials as a Unifying Platform: The paper strongly advocates for polymeric materials as a versatile platform for integrating diverse optical functions. Their ability to be doped with various active materials (EO chromophores, rare-earth ions) and their compatibility with standard microfabrication techniques are key advantages.
  • Dual-Functionality is Achievable: The successful co-doping of EO chromophores and rare-earth ions into a single polymer backbone demonstrates the feasibility of creating chips that perform both modulation and amplification, a significant step towards complex integrated optical systems.
  • Waveguide Design Extends Functionality: Beyond basic guiding, the paper highlights how clever waveguide design can unlock new capabilities. Waveguide concentrators for WDM and TTD delay lines for phased-array antennas are prime examples of this.
  • Thermo-Optic Switches are Robust: The use of TO switches for TTD modules is advantageous due to their polarization-independent nature and sufficient strength, simplifying integration and operation.

Key Results

  • Dual-Functional Chip: A cascaded dual-functional module was fabricated, integrating a 1x2 EO-polymer-based Y-fed directional coupler (modulator) with two post-modulation gain controllers (amplifiers). This chip was made using photolime gel doped with EO chromophores and Nd+3 ions.
  • WDM Components: Polymeric waveguide concentrators with air trenches were designed and fabricated. Analytical results showed crosstalk could be lowered to below -35dB. Integrated VOA arrays with waveguide concentrators were also fabricated, showing insertion loss flatness within 1dB for 16 channels and a dynamic range greater than 25dB.
  • TTD Modules: A multifunctional optical waveguide chip for photonic phased-array antennas was designed, featuring a programmable optical TTD module using polymer waveguides and 2x2 TO switches. A 10-meter long polyimide waveguide circuit was fabricated. A 2x2 TO TIR polymeric switch was also fabricated, demonstrating crosstalk less than -28dB and a switching power of approximately 132mW.

Limitations and Future Work

  • Material Stability: The photolime gel used in initial experiments was found to be not stable for practical applications. The authors are exploring more stable polymer systems like polyimides (Ultradel 9000 series, OPI N3000 series).
  • EO Coefficient at Operating Wavelengths: The EO coefficient of poled polymers can be wavelength-dependent. For instance, the EO coefficient was high at 633nm but small at 1064nm, while Nd+3 amplification is often at 1064nm. This mismatch needs to be addressed for optimal performance. Similarly, for 1550nm operation, Erbium ions are typically used for amplification, and the EO chromophore FTC was selected for its performance at 1064, 1310, and 1550nm.
  • Optical Loss: While efforts are made to reduce loss, the paper mentions that polymeric optical amplifiers can be added along long delay-line waveguides to balance optical loss.
  • Future Work: The paper suggests exploring more functions of optical waveguides and integrating them with other capabilities to expand applications in optical communication, photonic phased arrays, optical signal processing, and optical sensors. The development of more stable and high-performance polymeric materials remains an ongoing area of research.

Summary updated

Abstract

Based on polymeric materials, the possibilities of monolithic integration of various optical waveguide components are discussed and, especially, the efforts to realize the functions of optical modulation and amplification on a single optical chip are made. Exploration of more capabilities of optical waveguides is also emphasized. The work on exploring functions of optical waveguides for the applications in WDM components and photonic phased-array radar systems are presented and multifunctional optical waveguide chips with the explored functions are fabricated.
BibTeX
@inproceedings{yang2002multifunctional,
  author = {Jianyi Yang and Feng Zhao and Dechang An and Ray T. Chen},
  title = {{Multifunctional optical waveguide chips}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2002},
  doi = {10.1117/12.469639},
}
Figure