Multifunctional Freestanding Microprobes for Potential Biological Applications

Nana Yang, Zhenhai Wang, Jingjing Xu, Lijiang Gui, Zhiqiang Tang, Yuqi Zhang, Ming Yi, Shuanglin Yue, Shengyong Xu2019 · DOI

TL;DR

Researchers have developed novel, sword-shaped microprobes made from stainless steel that can simultaneously measure local temperature and electrical signals deep within living tissues. These probes offer excellent mechanical strength and flexibility, overcoming limitations of existing technologies for in-vivo biological research.

What Problem Does This Paper Address?

Accurately measuring local temperature and electrical signals deep within living organs and tissues is crucial for understanding complex biological processes and developing new medical treatments. However, existing microprobe technologies often fall short. Flexible probes can be difficult to insert deeply and precisely, while rigid probes can cause significant tissue damage due to their larger diameters. There's a clear need for probes that are both robust enough for deep insertion and delicate enough to minimize harm, while also offering multi-modal sensing capabilities. This paper aims to fill this gap by creating a new class of microprobes that are mechanically strong, flexible, and capable of both thermal and electrical measurements.

Methods

The fabrication process leverages standard cleanroom techniques, starting with a circular stainless-steel (SUS 304) substrate. The key steps include:

  • Defining the Probe Shape: A negative photoresist (SU-8) is used to pattern the sword-like shape of the microprobes and their connection plates. This SU-8 layer also serves as an insulating base.
  • Fabricating Sensors and Electrodes: Thin-film thermocouples (TFTCs) made of Palladium (Pd) and Chromium (Cr) are patterned onto the probes for temperature sensing. Additionally, Pd electrodes are fabricated for electrical signal detection. This involves multiple lithography, deposition (Ti adhesion layer, Pd, Cr, HfO2 insulation), and lift-off steps.
  • Achieving Freestanding Probes: A crucial step involves wet etching the stainless-steel substrate using an acidic solution (FeCl3, HCl, HNO3). A protective photoresist (SPR-220) is used to mask the sensor areas. The etching process is carefully controlled, with periodic removal and reapplication of the mask to prevent damage to the delicate sensor structures. This process releases the microprobes from the substrate, making them freestanding.
  • Device Testing:
    • Temperature Sensing: TFTCs are calibrated in an oil bath by measuring thermopower output against controlled temperature differences.
  • Electrical Sensing: Electrochemical impedance spectroscopy (EIS) is used to characterize the interface impedance of the electrodes.
  • Mechanical Testing: Stress-strain tests are performed using a universal testing machine, and probes are physically bent and inserted into tissues of live animals to assess their mechanical strength and elasticity.

Datasets

Not discussed in the paper. The study focuses on the fabrication and characterization of the microprobes themselves, with testing performed on the fabricated devices and in live animal models.

Key Insights and Ideas

  • Stainless Steel as a Substrate: Utilizing stainless steel for the probe body offers a unique combination of excellent mechanical strength and elasticity, crucial for deep tissue insertion, while also being biocompatible. This contrasts with more brittle silicon or less robust plastic materials.
  • Sword-Shape Design: The sword-like geometry, with a gradually increasing width from tip to handle, is key to achieving both precise insertion and sufficient mechanical support without causing excessive tissue damage.
  • Multifunctionality: Integrating both temperature sensors (TFTCs) and electrical recording electrodes onto a single, thin probe body significantly enhances its utility for complex biological studies.
  • Freestanding Fabrication: The wet-etching technique to release the probes from the substrate is a critical innovation, allowing for the creation of truly independent, flexible yet strong microprobes.
  • Improved Surface Smoothness: Coating the rough stainless-steel substrate with a thin SU-8 layer dramatically improves surface smoothness, which is vital for precise lithography and thin-film deposition, leading to higher sensor yield.

Key Results

  • Mechanical Strength: The probes exhibit excellent mechanical strength, withstanding bending up to 90° at stresses of 8.2-95 MPa. They can be repeatedly bent hundreds of times and recover their original shape.
  • Deep Tissue Insertion: The probes were successfully inserted 5-20 mm deep into the brain, abdomen, and thigh muscles of live rats without breaking or causing significant damage. They also remained straight when removed.
  • Temperature Sensing Sensitivity: The calibrated TFTCs showed a sensitivity of approximately 5.24 ± 0.15 μV/K.
  • Electrical Impedance: For a typical electrode, the measured low impedance was around 520 kΩ at 1 kHz, with impedance decreasing at higher frequencies due to capacitive effects.
  • Surface Roughness Reduction: The SU-8 coating reduced the root-mean-square roughness by a factor of 7-10, significantly improving the substrate for subsequent fabrication steps.

Limitations and Future Work

  • Limited Electrode Density: While the number of TFTCs and electrodes can be increased for wider probes, the paper doesn't detail achieving very high-density electrode arrays, which is common in some neural recording applications.
  • Potential for Tissue Damage: Although significantly reduced compared to thicker probes, any invasive probe carries some risk of tissue damage. Further optimization for minimizing this risk could be explored.
  • Future Work: The authors suggest these probes are promising for deep-level detection of 3D temperature distribution and electrical signal recording in neurons and muscles. Future work could focus on further miniaturization, increasing electrode density, and exploring their application in more complex in-vivo experiments and clinical settings.

Summary updated

BibTeX
@misc{yang2019multifunctional,
  author = {Nana Yang and Zhenhai Wang and Jingjing Xu and Lijiang Gui and Zhiqiang Tang and Yuqi Zhang and Ming Yi and Shuanglin Yue and Shengyong Xu},
  title = {{Multifunctional Freestanding Microprobes for Potential Biological Applications}},
  year = {2019},
  doi = {10.3390/s19102328},
}

Loading related content...

Figure