Multi-scale three-dimensional distribution of fracture- and igneous intrusion-controlled hydrothermal dolomite from digital outcrop model, Latemar platform, Dolomites, northern Italy

Carl Jacquemyn, Marijke Huysmans, Dave Hunt, Giulio Casini, Rudy SwennenAAPG Bulletin 2015 · DOI

TL;DR

This paper introduces a novel 3D geostatistical approach to analyze the distribution and geometry of hydrothermal dolomite bodies within a complex geological setting. By leveraging high-resolution digital outcrop models derived from LIDAR, the authors demonstrate a quantitative method to understand how igneous intrusions and stratigraphy control dolomite formation at multiple scales.

What Problem Does This Paper Address?

Hydrothermal dolomitization, often associated with igneous activity, is increasingly recognized as a significant factor in hydrocarbon exploration. However, understanding the complex 3D geometry and distribution of these dolomite bodies has been challenging. Traditional geostatistical methods often reduce 3D data to 2D or 1D, which is insufficient for the intricate, multi-directional nature of dolomite occurrences in settings like the Latemar platform. This study aims to bridge this gap by developing and applying a true 3D geostatistical method to quantitatively describe dolomite distribution and its relationship with geological features like dikes.

Methods

The core of this study is the development of a true 3D geostatistical approach for analyzing lithology distribution from digital outcrop models (DOMs). This method expands upon traditional 2D variogram mapping by creating 3D variogram grid volumes. Key techniques include:

  • High-resolution Digital Outcrop Model (DOM) creation: Using helicopter-based LIDAR scanning and photogrammetry to generate a detailed 3D representation of the Latemar platform.
  • Manual Lithology Picking: Identifying and digitizing limestone and dolomite occurrences on the DOM based on color differences.
  • 3D Variography: Calculating semivariograms in all directions within the 3D dataset to reveal spatial dependencies and anisotropy.
  • Anisotropy Analysis: Identifying principal directions of lithology variation using 3D contour surfaces of semivariance. This helps define the geometry and orientation of dolomite bodies at different scales.
  • Directional Semivariogram Modeling: Fitting nested semivariogram models along the identified anisotropy directions to mathematically describe the spatial distribution.
  • Reservoir Modeling: Integrating the geostatistical results (anisotropy directions, variogram parameters, and vertical proportion curves) into a reservoir grid model using kriging interpolation to predict lithology distribution.

Datasets

  • Latemar Platform Digital Outcrop Model (DOM): A high-resolution, photorealistic 3D model created from helicopter-based LIDAR scanning and high-resolution photography. This dataset provides detailed lithological information (limestone and dolomite) and dike positions across the entire platform.
  • Existing Literature and Field Observations: Used for validation and contextualization of the findings.

Key Insights and Ideas

  • True 3D Geostatistics is Crucial: Reducing complex 3D geological data to 2D or 1D is inadequate for understanding multi-directional geological phenomena like hydrothermal dolomite distribution. A full 3D approach is essential.
  • Dike Control at Small Scales: At smaller scales (<200 m), dolomite bodies are predominantly elongated vertically (pipes) or subhorizontally, and their orientation is strongly aligned with the dominant dike orientation (N30W). This confirms a direct genetic link between igneous intrusions and dolomite formation.
  • Stratigraphic Control at Large Scales: At larger scales (200-1600 m), a bedding-parallel anisotropy emerges, indicating that sedimentary facies and stratigraphic position play a significant role in controlling the overall distribution of dolomite.
  • Multi-Scale Anisotropy: The study reveals distinct anisotropy directions at different scales, reflecting both the geometry of individual dolomite bodies (small-scale) and their broader distribution patterns (large-scale).
  • Reservoir Modeling Implications: The developed geostatistical framework provides parameters that can be directly integrated into reservoir models, enabling more accurate predictions of dolomite distribution and potentially improving hydrocarbon recovery estimates.

Key Results

  • A novel 3D geostatistical methodology was developed and applied to the Latemar platform.
  • Small-scale anisotropy (<200 m): Identified two principal directions (vertical and subhorizontal) aligned with dike orientation, describing dolomite body geometry.
  • Large-scale anisotropy (200-1600 m): Revealed a bedding-parallel anisotropy, highlighting stratigraphic control on dolomite distribution.
  • The study produced a unique lithology dataset of limestone, dolomite, and dike positions across the entire Latemar platform.
  • The resulting reservoir model shows a complex composite of interfingering vertical and horizontal dolomite bodies, with clear alignment to dikes.
  • Dolomite distribution varies significantly across the platform, with the lowest part (Contrin Formation) being almost completely dolomitized, and a notable drop in dolomite percentage within the Lower Platform Facies (LPF).

Limitations and Future Work

  • Data Requirements: The 3D geostatistical approach requires a data-rich 3D scenario, such as detailed DOMs, which may not always be available.
  • Computational Intensity: Processing large 3D datasets for variography can be computationally demanding, necessitating the development of efficient algorithms.
  • Future Work: The authors suggest that the next promising step would be the application of 3D multiple points statistics for more accurate interpolation. They also propose that this approach can be extended to other geological datasets (e.g., seismic data inverted for lithology) and applied to analogous reservoirs by adapting the spatial relationships uncovered. Further studies with different dike distributions are recommended to better understand dike spacing control on dolomite bodies.

Summary updated

Abstract

ABSTRACT In recent years, fracture-controlled (hydrothermal) dolomitization in association with igneous activity has gained interest in hydrocarbon exploration. The geometry and distribution of dolomite bodies in this setting are of major importance for these new plays. The Latemar platform presents a spectacularly exposed outcrop analogue for carbonate reservoirs affected by igneous activity and dolomitization. Light detection and ranging (LIDAR) scanning and digital outcrop models (DOMs) of outcrops offer a great opportunity to derive geometrical information. Only a few analysis methods exist to quantitatively assess huge amounts of georeferenced three-dimensional lithology data. This study presents a novel quantitative approach to describe three-dimensional spatial variation of lithology derived from DOMs. This approach is applied to the Latemar platform to determine dolomite body geometry and distribution in relation to crosscutting dikes. A high-resolution photorealistic DOM of the Latemar platform allows description of dolomite occurrences in three dimensions, with high precision at platform scale. This results in a unique lithology dataset of limestone, dolomite, and dike positions. This dataset is analyzed by true three-dimensional variography for the geospatial description of dolomite distribution. In most studies, three-dimensional geostatistics is the combination of two-dimensional horizontal and one-dimensional vertical variation. In this study, the dolomite occurrences are extensive in three dimensions and cannot be reduced to a two-dimensional + one-dimensional case. Therefore, the concept of two-dimensional variogram maps is expanded to a three-dimensional description of lithology variation. Three-dimensional anisotropy detection is used to derive principal directions in the occurrence of dolomite. Two small-scale (&amp;lt;200 m [656 ft]) anisotropy directions emerge, one vertical and one subhorizontal, which describe the geometry of the dolomite bodies. These principal directions are perfectly aligned parallel to the average dike orientation. On platform scale (200–1600 m [656–5249 ft]) a bedding-parallel anisotropy direction indicates stratigraphic control on dolomite occurrences.
BibTeX
@article{jacquemyn2015multi,
  author = {Carl Jacquemyn and Marijke Huysmans and Dave Hunt and Giulio Casini and Rudy Swennen},
  title = {{Multi-scale three-dimensional distribution of fracture- and igneous intrusion-controlled hydrothermal dolomite from digital outcrop model, Latemar platform, Dolomites, northern Italy}},
  journal = {AAPG Bulletin},
  year = {2015},
  doi = {10.1306/10231414089},
}
Figure