Multi-scale Fusion Model Based on Gated Recurrent Unit for Enhancing Prediction Accuracy of State-of-charge in Battery Energy Storage Systems

Hao Liu, Fengwei Liang, Tianyu Hu, Jichao Hong, Huimin MaJournal of Modern Power Systems and Clean Energy 2024 · DOI

Accurate State-of-Charge (SOC) prediction is the holy grail of Battery Management Systems (BMS). Think of SOC as the "fuel gauge" for an electric vehicle (EV); if it’s wrong, you risk either getting stranded or damaging the battery's lifespan through over-discharge.

A recent paper published in the Journal of Modern Power Systems and Clean Energy introduces a novel architecture called the Multi-scale Fusion Gated Recurrent Unit (MSFGRU). By blending local data points with broader temporal "patches," the researchers have achieved a real-time prediction error of less than 1.5%.

TL;DR

The researchers developed a multi-scale fusion model (MSFGRU) that combines traditional point-wise data processing with a "patching" technique to capture both short-term fluctuations and long-term trends in battery data. Validated on real-world EV datasets, the model achieves an absolute error of less than 1.5%, significantly outperforming standard deep learning models like LSTMs and Transformers.

What Problem Does This Paper Address?

Predicting SOC in a laboratory is relatively easy, but real-world EV data is a chaotic mix of aggressive driving, regenerative braking, and varying temperatures. Existing deep learning methods often face a trade-off: they either focus too much on immediate "point-wise" changes (local features) or try to capture the whole history (global features) and lose the nuances of sudden shifts.

The authors identified a specific gap: an imbalance between multi-scale feature fusion and global information extraction. Standard Gated Recurrent Units (GRUs) are great at sequential data, but they can struggle with very long-term dependencies or complex contextual nuances found in real-world driving cycles.

Methods

The authors propose the MSFGRU model, which operates through a sophisticated four-step pipeline:

  1. Feature Selection via Pearson Analysis: Before feeding data into the neural network, they used Pearson correlation analysis to identify the most impactful variables. They found that total voltage, current, max/min cell voltages, and max/min temperatures were the "key players" for SOC.
  2. The Dual-Branch Architecture: This is the core innovation. The model splits the input into two paths:
  3. Branch A (Point-wise): A standard multi-layer GRU processes individual data points to capture immediate, short-term dependencies.
  4. Branch B (Patch-wise): The data is grouped into "patches" (sub-series segments). A dual-stage multi-layer GRU then processes these patches. This allows the model to understand the "semantic context"—essentially seeing the forest instead of just the trees.
  5. Adaptive Weight Fusion: Rather than just averaging the two branches, the model uses learnable weights ($\omega_1, \omega_2$) to dynamically decide which branch is more reliable for a given segment of data.
  6. Smoothing: A bidirectional Kalman filter is applied to the output to ensure the final SOC prediction is smooth and physically realistic.

Datasets

The study utilized real-world EV operation data collected between January and March.

  • Sampling: 10-second intervals.
  • Conditions: The data covers both active driving and "parked-charging" scenarios.
  • Split: A 6:2:2 ratio for training, testing, and validation.
  • Temporal Validation: To prove the model wasn't just "memorizing" one specific week, they tested it across nine non-consecutive days in March to ensure temporal stability.

Key Insights and Ideas

  • The "Patching" Advantage: By aggregating time steps into sub-series, the model gains a "contextual memory" that is difficult to achieve when looking at isolated data points. This is particularly effective for capturing the slow-moving chemical changes in a battery.
  • Dynamic Importance: The adaptive fusion mechanism allows the model to shift its focus. For example, during steady charging, the patch-wise branch might carry more weight, while during erratic city driving, the point-wise branch becomes more critical.
  • Pearson Correlation is Context-Dependent: The researchers noted that "Total Current" has a much higher correlation with SOC during parked-charging ($r_p = 0.500$) than during active driving ($r_d = -0.015$), highlighting why a one-size-fits-all feature set doesn't work for EVs.

Key Results

The MSFGRU model was benchmarked against Linear Regression (LR), LSTM, standard GRU, Transformer, and PatchTST:

  • Accuracy: Achieved an absolute error of < 1.5% for 1-minute lead-step predictions.
  • Performance Gain: Showed an average improvement of 16% in Mean Squared Error (MSE) and 5% in Mean Relative Error (MRE) over the best-performing baseline (standard GRU).
  • Stability: While standard GRUs saw a significant error spike when transitioning from charging to driving, the MSFGRU remained stable, proving its robustness to operational shifts.
  • Optimal Config: Grid search determined the sweet spot for the model: a batch size of 64, 4 hidden layers, and a patch length of 60.

Limitations and Future Work

While the results are impressive, there are areas for further exploration:

  • Lead Time: The paper focuses on 1-5 minute predictions. Extending this to 30-60 minute horizons would be valuable for long-distance trip planning.
  • Generalization: The model was tested on a specific real-world dataset. Its performance across different battery chemistries (e.g., LFP vs. NMC) or extreme weather conditions (beyond the Jan-March window) remains to be seen.
  • SOH Integration: The authors suggest that future work could integrate State-of-Health (SOH) to account for battery aging, which naturally changes the SOC-voltage relationship over time.

Summary updated

Abstract

Accurate prediction of the state-of-charge (SOC) of battery energy storage system (BESS) is critical for its safety and lifespan in electric vehicles. To overcome the imbalance of existing methods between multi-scale feature fusion and global feature extraction, this paper introduces a novel multi-scale fusion (MSF) model based on gated recurrent unit (GRU), which is specifically designed for complex multi-step SOC prediction in practical BESSs. Pearson correlation analysis is first employed to identify SOC-related parameters. These parameters are then input into a multi-layer GRU for point-wise feature extraction. Concurrently, the parameters undergo patching before entering a dual-stage multi-layer GRU, thus enabling the model to capture nuanced information across varying time intervals. Ultimately, by means of adaptive weight fusion and a fully connected network, multi-step SOC predictions are rendered. Following extensive validation over multiple days, it is illustrated that the proposed model achieves an absolute error of less than 1.5% in real-time SOC prediction.
BibTeX
@article{liu2024multi,
  author = {Hao Liu and Fengwei Liang and Tianyu Hu and Jichao Hong and Huimin Ma},
  title = {{Multi-scale Fusion Model Based on Gated Recurrent Unit for Enhancing Prediction Accuracy of State-of-charge in Battery Energy Storage Systems}},
  journal = {Journal of Modern Power Systems and Clean Energy},
  year = {2024},
  doi = {10.35833/mpce.2023.000726},
}
Figure