Monolithic Composite "Pressure + Acceleration + Temperature + Infrared" Sensor Using a Versatile Single-Sided "SiN/Poly-Si/Al" Process-Module

Zao Ni, Chen Yang, Dehui Xu, Hong Zhou, Wei Zhou, Tie Li, Bin Xiong, Xinxin LiSensors 2013 · OpenReview

TL;DR

This paper introduces a novel, low-cost, single-sided fabrication process for monolithic integration of multiple sensors onto a single chip. They demonstrate this by creating the first "pressure + acceleration + temperature + infrared" (PATIR) composite sensor, paving the way for highly integrated and customizable sensing nodes for IoT applications.

What Problem Does This Paper Address?

The increasing demand for complex environmental sensing and monitoring has led to a need for "multifunctional sensing-network nodes." While assembling individual sensors onto a PCB is an option, it results in larger size, higher power consumption, and increased cost, hindering large-scale deployments. Existing integrated sensor solutions often rely on complex, double-sided fabrication processes or expensive specialized wafers (like SOI), which are not conducive to low-cost mass production. This paper addresses the need for a simplified, cost-effective, and versatile fabrication platform that enables the monolithic integration of diverse sensing functions.

Methods

The core of this work is a new "low-cost, single-sided 'SiN/Poly-Si/Al' process module" built on conventional silicon substrates. This approach combines front-side surface and bulk micromachining techniques, allowing for the fabrication of various sensor structures (basic, suspended, chamber, and beam types) using shared materials and compatible process steps.

Key aspects of the method include:

  • Material Selection: Low-stress silicon nitride (LS-SiN) is chosen for its mechanical strength, low thermal expansion, and infrared absorptivity, making it suitable for diaphragms, beams, and absorbing layers. Polysilicon (poly-Si) is used for its tunable conductivity and piezoresistivity, enabling piezoresistors, thermistors, and thermocouple components. Aluminum (Al) is used for interconnections and as part of the thermocouples.
  • Structure Design: The paper categorizes common MEMS sensor structures and outlines how they can be realized using the proposed process. For instance, suspended structures and chambers are formed using surface micromachining with sacrificial layers, while front-side bulk micromachining is used for creating deep cavities.
  • PATIR Sensor Design: A specific "pressure + acceleration + temperature + infrared" (PATIR) sensor is designed and fabricated as a demonstration. This includes:
  • A piezoresistive absolute-pressure sensor using a sealed quasi-vacuum chamber with a SiN diaphragm and poly-Si piezoresistors.
  • A piezoresistive accelerometer with a proof-mass suspended by SiN beams and poly-Si piezoresistors.
  • A thermoelectric infrared detector featuring a suspended SiN absorbing membrane and poly-Si/Al thermocouples.
  • A thermistor made of poly-Si strips on a SiN layer for temperature sensing.
  • Fabrication Process: A detailed step-by-step fabrication flow is presented, highlighting the use of LPCVD for material deposition, RIE for patterning, and HF etching for sacrificial layer removal. A unique aspect is the use of TEOS for sealing release holes, which also helps create a vacuum for the pressure sensor. Bulk micromachining with XeF2 is used for thermal insulation of the infrared detector. Finally, wafer-level prepackaging with a cap-wafer is performed.

Datasets

Not discussed in the paper. The paper focuses on the design, fabrication, and characterization of a novel sensor, rather than training or evaluating on existing datasets.

Key Insights and Ideas

  • Single-Sided Process Advantage: The most significant insight is the development of a versatile, single-sided fabrication process. This dramatically simplifies manufacturing, reduces costs, and improves yield compared to double-sided processes, making it ideal for mass production of sensing nodes.
  • "Multifunctional-Library" Concept: The proposed module acts as a "function library," allowing users to select and activate different sensing functions on a single chip. This offers a customizable and cost-effective approach for developing application-specific multifunctional sensors.
  • Material Synergy: The clever combination of SiN, poly-Si, and Al layers allows for the realization of diverse sensing principles (piezoresistive, thermoelectric, resistive) within a single, compatible process.
  • Integrated Self-Test: The accelerometer design incorporates a wafer-level self-test capability using electrostatic actuation, which is crucial for quality control in high-volume manufacturing.
  • Low-Cost Integration: By avoiding expensive SOI wafers and double-sided processing, this approach significantly lowers the barrier to entry for creating complex integrated sensors.

Key Results

The paper demonstrates the successful fabrication and characterization of the PATIR composite sensor with a chip size of 2.5 mm × 2.5 mm. Key performance metrics include:

  • Pressure Sensor: Sensitivity of 49 mV/MPa (with 3.3V supply), non-linearity within ±1.2% FSO, and good repeatability/hysteresis.
  • Accelerometer: Sensitivity of 66 µV/g (with 3.3V supply), non-linearity within ±0.41% FSO, and a -3 dB bandwidth of 780 Hz.
  • Infrared Detector: Responsivity of 45 V/W and detectivity of 3.6 × 10⁷ cm·Hz¹/2/W for the circular-membrane device.
  • Thermistor: Sensitivity of 4.1 Ω/°C and a TCR of 7.1 × 10⁻⁴/°C over a temperature range of -25–120 °C.

The performance of the PATIR sensor compares favorably to other reported single-chip integrated composite sensors, especially considering its small size and low-cost fabrication.

Limitations and Future Work

  • Cross-Interference: While the paper states that measurements were taken "without involving the cross interference among the sensing components," the potential for cross-interference between integrated sensors in real-world applications is a common challenge for such devices. This is not explicitly addressed as a limitation but is an area for future investigation.
  • Signal Processing: The paper mentions that signal processing circuit chips could be fabricated separately to avoid deep etching in IC fabrication and ensure high yield. The authors state that packaging the sensor chip and IC chip together using a hybrid method like system-in-package (SIP) is their "ongoing work," implying that a fully integrated system with on-chip signal processing is a future direction.
  • Environmental Factors: While the thermistor covers a range of -25–120 °C, the long-term stability and performance of the sensors under extreme environmental conditions (humidity, dust, etc.) are not detailed.
  • Further Optimization: The paper presents a proof-of-concept. Further optimization of individual sensor performance and the overall integration process could lead to even better results.

Summary updated

Abstract

We report a newly developed design/fabrication module with low-cost single-sided “low-stress-silicon-nitride (LS-SiN)/polysilicon (poly-Si)/Al” process for monolithic integration of composite sensors for sensing-network-node applications. A front-side surface-/bulk-micromachining process on a conventional Si-substrate is developed, featuring a multifunctional SiN/poly-Si/Al layer design for diverse sensing functions. The first “pressure + acceleration + temperature + infrared” (PATIR) composite sensor with the chip size of 2.5 mm × 2.5 mm is demonstrated. Systematic theoretical design and analysis methods are developed. The diverse sensing components include a piezoresistive absolute-pressure sensor (up to 700 kPa, with a sensitivity of 49 mV/MPa under 3.3 V supplied voltage), a piezoresistive accelerometer (±10 g, with a sensitivity of 66 μV/g under 3.3 V and a −3 dB bandwidth of 780 Hz), a thermoelectric infrared detector (with a responsivity of 45 V/W and detectivity of 3.6 × 107 cm·Hz1/2/W) and a thermistor (−25–120 °C). This design/fabrication module concept enables a low-cost monolithically-integrated “multifunctional-library” technique. It can be utilized as a customizable tool for versatile application-specific requirements, which is very useful for small-size, low-cost, large-scale sensing-network node developments.
BibTeX
@inproceedings{ni2013monolithic,
  author = {Zao Ni and Chen Yang and Dehui Xu and Hong Zhou and Wei Zhou and Tie Li and Bin Xiong and Xinxin Li},
  title = {{Monolithic Composite "Pressure + Acceleration + Temperature + Infrared" Sensor Using a Versatile Single-Sided "SiN/Poly-Si/Al" Process-Module}},
  booktitle = {Sensors},
  year = {2013},
  url = {https://openreview.net/forum?id=B5nkFJ5bvWh},
}
Figure