Monitoring and Evaluation of Debris Flow Disaster in the Loess Plateau Area of China: A Case Study

Baofeng Wan, Ning An, Gexue BaiWater 2024 · DOI

TL;DR

This study investigates debris flow disasters in China's Loess Plateau, a region highly susceptible to such events. By combining historical satellite imagery, field measurements of landslide thickness, and numerical modeling, the researchers developed a framework to better understand debris flow initiation and spreading patterns, offering crucial insights for disaster prevention and early warning systems.

What Problem Does This Paper Address?

The Loess Plateau, characterized by its complex topography and geology, is a hotspot for landslides and debris flows, leading to significant economic losses and casualties. Accurately predicting the initiation mechanisms and spreading patterns of these disasters is crucial for effective mitigation. Existing research often focuses on specific aspects, but a comprehensive approach integrating detailed field data with advanced numerical modeling for this specific region was needed. This paper aims to fill that gap by providing a case study in the Laolang gully, focusing on how different topographic resolutions, critical slope thresholds, and movement parameters influence debris flow behavior.

Methods

The study employed a multi-faceted approach:

  • Data Acquisition and Processing: Historical satellite images of the Laolang gully were collected and digitized. These were combined with 1:10,000 topographic maps to create high-resolution 3D topographic and geomorphological maps.
  • Landslide Characterization: Nineteen representative landslides were selected for thickness measurement using two methods:
  • Standard Penetrometer: A common geotechnical tool to assess soil strength and determine depth to the sliding surface.
  • High-Density Electrical Method: A geophysical technique used to verify the penetrometer measurements and provide a more detailed understanding of subsurface resistivity, indicative of water content and sliding surfaces.
  • Numerical Modeling: The Flow-R numerical model was utilized to simulate debris flow occurrence and development. This involved:
  • Source Area Identification: Using DEM data and various terrain-derived layers (slope, flow accumulation, curvature) to identify potential initiation zones.
  • Propagation Simulation: Employing a propagation algorithm and friction law to model the movement and spreading range of debris flows under different scenarios.
  • Parameter Sensitivity Analysis: Investigating the impact of different DEM resolutions, critical slope thresholds, and the "angle of arrival" parameter on the simulation results.

Datasets

  • Historical Satellite Images: Used for digitizing topographic and geomorphological features.
  • 1:10,000 Topographic Maps: Provided the base data for creating high-resolution DEMs.
  • Field Data: Landslide thickness measurements from standard penetrometer tests and high-density electrical surveys.
  • DEM Data: Generated at 5m, 10m, and 20m resolutions for comparative analysis of source area identification and hazard assessment.

Key Insights and Ideas

  • DEM Resolution Matters: The study highlights that the choice of DEM resolution significantly impacts the accuracy of debris flow hazard assessment. Both overly coarse (20m) and overly fine (5m) resolutions can lead to misidentification of source areas and unrealistic spreading patterns. A 10m resolution DEM emerged as the most suitable for this region.
  • Critical Slope Thresholds are Key: The critical slope threshold for identifying potential debris flow source areas is a crucial parameter. A lower threshold allows more material to be mobilized, leading to wider spreading and longer travel distances. Conversely, a higher threshold can exclude viable source areas, underestimating the risk.
  • Angle of Arrival Influences Energy Dissipation: The "angle of arrival" parameter in the simplified friction-limited model (SFLM) directly influences the energy loss due to friction. A larger angle signifies greater energy loss, resulting in shorter movement distances for the debris flow. This parameter has a physical basis and practical relevance.
  • Loess Plateau's Unique Vulnerability: The paper reinforces the understanding that the Loess Plateau's specific geomorphology (gullies, fragmented surfaces) and material properties (high porosity, sensitivity to water) create a highly conducive environment for debris flow initiation and propagation.

Key Results

  • 10m DEM Optimal: The 10m resolution DEM provided the most consistent and realistic simulation results for debris flow source area identification and spreading patterns, aligning well with observed events.
  • Slope Threshold Impact: Lower critical slope thresholds (e.g., 15°) resulted in wider and longer debris flow spreading compared to higher thresholds (e.g., 35°).
  • Angle of Arrival Impact: A smaller angle of arrival (e.g., 7°) led to wider spreading and longer movement distances, while a larger angle (e.g., 11°) resulted in shorter distances due to increased energy loss.
  • Landslide Thickness Validation: The standard penetrometer method for landslide thickness measurement was validated against the high-density electrical method, showing a low error rate (less than 7%), confirming its reliability for shallow landslides in the region.

Limitations and Future Work

  • Model Simplifications: The study acknowledges that the SFLM model is based on a simplified energy balance, which might not capture all the complex dynamics of debris flow.
  • Data Granularity: While 10m DEM was found to be optimal, the paper suggests that even finer resolutions might be beneficial for highly detailed local analyses, though practical limitations exist.
  • Future Work: The authors suggest that further research could explore more advanced numerical models and integrate a wider range of influencing factors (e.g., rainfall intensity, seismic activity) for more comprehensive debris flow risk assessment and early warning systems. The findings provide a strong foundation for developing more robust disaster prevention strategies in the Loess Plateau.

Summary updated

Abstract

The Loess Plateau area, with complex geomorphological features and geological structure, is highly prone to geologic disasters such as landslides and debris flow, which cause great losses. To investigate the initiation mechanism of landslide and debris flow disasters and their spreading patterns, historical satellite images in the Laolang gully were collected and digitized to generate three-dimensional topographic and geomorphological maps. Typical landslides were selected for landslide thickness measurement using a standard penetrometer and high-density electrical method. Numerical models were established to simulate the occurrence and development of landslides under different working conditions and to evaluate the spreading range based on the propagation algorithm and friction law. The results show that the 10 m resolution DEM data are well matched with the potential hazard events observed in the field site. The smaller the critical slope threshold, the greater the extent and distance of landslide spreading. The larger the angle of arrival, the greater the energy loss, and therefore the smaller the landslide movement distance. The results can provide scientific theoretical guidance for the prevention and control of rainfall-induced landslide and debris flow disasters in the Loess Plateau area.
BibTeX
@inproceedings{wan2024monitoring,
  author = {Baofeng Wan and Ning An and Gexue Bai},
  title = {{Monitoring and Evaluation of Debris Flow Disaster in the Loess Plateau Area of China: A Case Study}},
  booktitle = {Water},
  year = {2024},
  doi = {10.3390/w16172539},
}
Figure