Moment Dynamics of Zirconia Particle Formation for Optimizing Particle Size Distribution

Wolfgang Halter, Rahel Eisele, Dirk Rothenstein, Joachim Bill, Frank AllgöwerNanomaterials 2019 · DOI

TL;DR

This paper presents a mathematical model to understand and optimize the formation of zirconia nanoparticles, crucial for applications like advanced ceramics and bio-inspired materials. By deriving the "moment dynamics" of particle formation and fitting it to experimental data, the researchers identified key growth mechanisms and determined optimal conditions for producing a high yield of small, stable nanoparticles.

What Problem Does This Paper Address?

Producing uniform, nanosized zirconia particles is essential for various high-tech applications, including thermal barrier coatings, nanocomposites, and even biomedical implants. Traditional methods for synthesizing these particles can be time-consuming and require extensive experimental trials to find the optimal conditions for achieving the desired particle size distribution. The challenge lies in understanding the complex interplay of factors like precursor concentration and temperature that govern particle nucleation, growth, and aggregation. This paper aims to bridge this gap by developing a predictive model that can guide the optimization process, reducing the need for exhaustive experimentation.

Methods

The core of this work is a population balance model, a standard approach for describing systems with many interacting particles. The authors simplify this complex model by focusing on the "moment dynamics." Moments are statistical measures (like the average number of particles or their total volume) that capture key characteristics of the particle size distribution. By deriving equations for these moments, the researchers transform a computationally intensive partial differential equation into a more manageable system of ordinary differential equations.

They then employ a parameter identification strategy. This involves fitting the model's parameters (like growth rate and nucleation rate) to experimental data obtained through dynamic light scattering (DLS) for particle size and inductively coupled plasma optical emission spectrometry (ICP-OES) for zirconium concentration. The identified parameters are then expressed as polynomial functions of temperature and precursor concentration. Finally, an optimization problem is formulated to find the process parameters that maximize the number of nanoparticles while minimizing their average diameter, using a weighted objective function.

Datasets

The study utilizes experimental data collected from a series of experiments varying precursor concentration (20 mM, 30 mM, 50 mM) and temperature (25 °C, 40 °C, 60 °C). These experiments involved:

  • Dynamic Light Scattering (DLS): To measure the average particle diameter over time.
  • Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES): To measure the concentration of dissolved Zr⁴⁺ ions over time.
  • Liquid Pycnometry: To determine the density of the synthesized zirconia-based material (ZrbM).
  • Zeta Potential Measurements: To characterize the surface charge of the mineralized particles.

No new benchmark datasets were introduced; rather, the study generated and used its own experimental data for model validation and parameter optimization.

Key Insights and Ideas

  • Moment Dynamics as a Powerful Simplification: The paper demonstrates that focusing on the moments of the particle size distribution can significantly simplify the analysis of complex particle formation processes, making them computationally tractable for optimization.
  • Dual Growth Mechanisms: The model successfully identifies two primary mechanisms driving zirconia particle growth: molecular addition of Zr-tetramers/oligomers and size-independent particle agglomeration. This insight is crucial for understanding how to control particle size.
  • Predictive Power of the Model: The developed model shows good agreement with experimental data across various conditions, suggesting its reliability for predicting particle formation dynamics.
  • Bio-Inspired Mineralization Relevance: The work highlights the potential for this modeling approach to be applied to bio-inspired mineralization processes, where precise control over nanoparticle formation is key.
  • Optimization for Nanoparticle Yield: The study successfully identifies optimal process parameters (temperature and precursor concentration) that maximize the production of small, stable nanoparticles, a critical requirement for efficient film deposition.

Key Results

  • The model accurately captures the temporal evolution of particle number, total volume, and precursor concentration across a range of experimental conditions.
  • Parameter identification revealed that size-independent agglomeration (β₁) is significant, while size-dependent agglomeration (β₂) is negligible (suggested to be zero).
  • The saturation concentration (c_s) of Zr⁴⁺ species was found to increase with precursor concentration and decrease with temperature, a behavior explained by the influence of pH and dielectric constant.
  • The optimization process identified an optimal temperature of approximately 45.8 °C and a precursor concentration of 40 mM. Under these conditions, the model predicts that roughly 25% of precursors are mineralized, resulting in an average particle diameter of about 24 nm.

Limitations and Future Work

  • Local Approximation: The polynomial dependencies of the mechanistic parameters are acknowledged as local approximations. Their validity outside the studied range of temperatures and precursor concentrations is not guaranteed.
  • Oscillations and Chaos: The authors note that due to the model's non-linearities, oscillations or chaotic behavior cannot be entirely ruled out and suggest further analysis of the model's convergence properties.
  • Time-Dependent Temperature Profiles: The paper suggests exploring time-dependent temperature profiles to exploit different growth mechanisms more effectively, potentially leading to even better particle size distributions.
  • Real-time Control: The authors propose developing automatic control systems that use real-time observations to adjust process parameters, allowing for precise control of particle size distribution.
  • Inclusion of pH and Temperature Limits: For bio-inspired mineralization, incorporating limits on pH and temperature is recommended to ensure the stability of organic templates.

Summary updated

Abstract

We study the particle formation process of Zirconia ( ZrO 2 )-based material. With a model-based description of the particle formation process we aim for identifying the main growth mechanisms for different process parameters. After the introduction of a population balance based mathematical model, we derive the moment dynamics of the particle size distribution and compare the model to experimental data. From the fitted model we conclude that growth by molecular addition of Zr-tetramers or Zr-oligomers to growing particles as well as size-independent particle agglomeration takes place. For the purpose of depositing zirconia-based material (ZrbM) on a substrate, we determine the optimal process parameters such that the mineralization solution contains preferably a large number of nanoscaled particles leading to a fast and effective deposition on the substrate. Besides the deposition of homogeneous films, this also enables mineralization of nanostructured templates in a bioinspired mineralization process. The developed model is also transferable to other mineralization systems where particle growth occurs through addition of small molecular species or particle agglomeration. This offers the possibility for a fast determination of process parameters leading to an efficient film formation without carrying out extensive experimental investigations.
BibTeX
@inproceedings{halter2019moment,
  author = {Wolfgang Halter and Rahel Eisele and Dirk Rothenstein and Joachim Bill and Frank Allgöwer},
  title = {{Moment Dynamics of Zirconia Particle Formation for Optimizing Particle Size Distribution}},
  booktitle = {Nanomaterials},
  year = {2019},
  doi = {10.3390/nano9030333},
}

Loading related content...

Figure