Modulation of frication noise in a dynamic mechanical model of the larynx and vocal tract
Lists
Only you see this
Abstract
A dynamic mechanical model of the larynx and vocal tract was used to investigate the aerodynamics and acoustics of voiced fricatives. The model had typical dimensions for a human adult male. Glottal excitation arose from driven shutters representing the vocal folds; sinusoidal and square-wave driver functions were investigated. Glottal amplitude, fundamental frequency (f0), and volume velocity were independently controlled. Frication noise was produced by an orifice plate with a sharp-edged obstacle on its downstream side. Two different positions of constriction within the vocal tract, each coupled with a different constriction-obstacle distance, were investigated. Vocal-tract wall pressure was measured at three locations and a microphone at the vocal-tract exit measured radiated sound. The sound radiated from the open end of the vocal tract was found to have both harmonic and noise components. The noise was modulated by the f0 of the glottal vibration. The depth of modulation was independent of the shape of the glottal excitation. It showed an overall decreasing trend with increasing f0 in the range 20 to 150 Hz, but with a local maximum of modulation depth around 80 Hz. The noise bursts had maxima coincident with the middle of the glottal open phase.
BibTeX
@article{barney2006modulation,
author = {Anna Barney and Philip J. B. Jackson},
title = {{Modulation of frication noise in a dynamic mechanical model of the larynx and vocal tract}},
journal = {The Journal of the Acoustical Society of America},
year = {2006},
doi = {10.1121/1.4786257},
}Loading related content...