Modular bioreactor for multi-well electrical stimulation of in vitro cardiac tissue engineering constructs

Suh Hee Cook, Jack Twiddy, Yuan-Fang Li, Kiran M. Ali, Daxian Zha, Kaleah Gaddy, Lauren Mabe, Ke Huang, Ke Cheng, Michael A. Daniele, Jessica M. GluckLab 2025 · DOI

TL;DR

Researchers have developed an open-source, modular bioreactor that brings high-throughput electrical stimulation to standard 12-well culture plates for less than $300. The system successfully matured neonatal rat heart cells and revealed that while high voltages are typically lethal, co-culturing with fibroblasts provides a surprising "electro-protective" effect.

What Problem Does This Paper Address?

In the heart, cells don't just sit there; they are constantly pulsed by electrical signals that coordinate beating and drive maturation. To grow realistic heart tissue in a lab (in vitro), researchers need to mimic this environment.

However, current commercial electrical stimulation systems are a major bottleneck. They can cost anywhere from $17,000 to over $250,000, often require proprietary culture vessels, and use bulky, non-removable electrodes that are difficult to sterilize. This "paywall" prevents many labs from exploring how electricity affects cell behavior. There is a dire need for a low-cost, high-throughput system that works with standard lab plasticware.

Methods

The team designed a modular "lid" for a standard 12-well plate. The system consists of:

  • Hardware: A primary Printed Circuit Board (PCB) containing a 555-timer-based relaxation oscillator and a 3D-printed interposer.
  • Electrodes: Laser-cut carbon paper electrodes (cheap and disposable) attached to secondary PCBs that plug into the main board at right angles, dipping directly into the wells.
  • Circuitry: The system generates a unipolar square wave (200 Hz, 20% duty cycle). A voltage divider allows the system to deliver four different amplitudes (0V, 0.1V, 1V, and 10V) to different columns of the plate simultaneously.
  • Validation: The researchers used SPICE (Simulation Program with Integrated Circuit Emphasis) to model the electrical behavior and FEA (Finite Element Analysis) via COMSOL to ensure the electrical field was homogeneous across the cell layer at the bottom of the wells.

Datasets

As this is a bioengineering hardware paper rather than a machine learning study, "datasets" refers to the experimental validation data:

  • Electrochemical Impedance Spectroscopy (EIS): Used to characterize the electrode-electrolyte interface.
  • Biological Data: Viability assays (LIVE/DEAD and alamarBlue), immunocytochemistry (staining for $\alpha$-actinin and Connexin 43), and RT-qPCR (measuring the expression of five key cardiac genes).
  • Comparative Benchmarks: The study compared stimulated cells against non-stimulated controls and compared monocultures (heart cells only) against co-cultures (heart cells + fibroblasts).

Key Insights and Ideas

  • The Fibroblast Shield: One of the most striking findings was that 10V stimulation was lethal to cardiomyocytes alone, but when co-cultured with fibroblasts, the heart cells survived. This suggests fibroblasts provide an "electro-protective" niche, possibly by buffering the electrical environment or secreting protective factors.
  • Less is More: While 10V is often used in clinical pacing, 0.1V was the "sweet spot" for in vitro maturation. This lower voltage significantly upregulated genes responsible for contraction (cTnI, $\beta$MYC) and electrical coupling (Cx43).
  • Modular Sterility: By using cheap, replaceable carbon paper electrodes, the researchers solved the primary headache of bioreactor maintenance: cross-contamination. If an electrode breaks or gets contaminated, it costs pennies to replace rather than thousands to repair.

Key Results

  • Cost-Effectiveness: The entire system can be fabricated for <$300, a fraction of the cost of commercial alternatives.
  • Gene Upregulation: At 0.1V stimulation, researchers observed a massive 14.88-fold increase in cTnI (cardiac troponin I) and an 8.51-fold increase in $\beta$MYC (myosin heavy chain) expression compared to controls.
  • Structural Maturation: Immunostaining confirmed that stimulated cells had better-organized sarcomeres (the "engines" of the cell) and higher levels of Connexin 43, which forms the "tunnels" (gap junctions) that allow electrical signals to pass between cells.

Limitations and Future Work

The authors noted a "loading effect" on the 10V channel; when multiple wells were stimulated at high voltage simultaneously, the actual delivered voltage dropped slightly due to the limits of the operational amplifiers. Future versions will likely include a transistor-based gain stage to boost current capacity.

Additionally, while this study used rat cells, the ultimate goal is to apply this to human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). The researchers plan to integrate the bioreactor with real-time sensing tools, such as calcium imaging or multielectrode arrays, to watch the tissues mature in real-time.

Summary updated

Abstract

Systems for providing electrical stimulation to <i>in vitro</i> cell cultures are valuable in many tissue engineering applications. We designed and fabricated a novel modular bioreactor consisting of a printed circuit board assembly and carbon paper electrodes which is compatible with commercially available 12-well plates. Our system is the first low-cost, accessible bioreactor of its kind and capable of simultaneously supplying four different amplitudes of stimulus waveform to different wells of the bioreactor. SPICE and FEA were used to model and validate the delivery of these stimuli to cells in culture. We then used our bioreactor to apply 0 V, 0.1 V, 1 V, and 10 V of electrical stimulation to neonatal rat cardiomyocytes (NRCMs), with and without neonatal rat ventricular fibroblast co-culture, for 10 minutes daily on 7 consecutive days. Electrically stimulated NRCMs maintained viability except in response to 10 V stimulation in the absence of fibroblast co-culture. Furthermore, NRCMs exposed to 0.1 V stimulation exhibited enhanced markers (sarcomeric α-actinin and connexin 43) and upregulated genes (<i>βMYC</i>, <i>cTnI</i>, <i>Cav1</i>, and <i>Cx43</i>) related to cardiac electrophysiology compared to non-stimulated controls. This suggests 0.1 V stimulation with our bioreactor is advantageous for the electrophysiological function of primary cardiac cells; it may also be useful in electrophysiologically maturing induced pluripotent stem cell-derived cardiomyocytes.
BibTeX
@inproceedings{cook2025modular,
  author = {Suh Hee Cook and Jack Twiddy and Yuan-Fang Li and Kiran M. Ali and Daxian Zha and Kaleah Gaddy and Lauren Mabe and Ke Huang and Ke Cheng and Michael A. Daniele and Jessica M. Gluck},
  title = {{Modular bioreactor for multi-well electrical stimulation of <i>in vitro</i> cardiac tissue engineering constructs}},
  booktitle = {Lab},
  year = {2025},
  doi = {10.1039/d5lc00234f},
}

Loading related content...

Figure