Modelling of fluid mud flow based on a three-dimensional hydrodynamic model : incorporating a 3D rheological model

Gaochuang Shi, Jinfeng Zhang, Qinghe Zhang, Zhao Zhangyi, Bing Yan, Hua YangFrontiers in Marine Science 2024 · DOI

Abstract

Modeling fluid mud in estuaries and coastal areas is a complicated task due to its non-Newtonian characteristics. This study adopts a continuous modeling approach to investigate the laminar flow of fluid mud by introducing a three-dimensional (3D) form of the Herschel–Bulkley rheological model into the Finite Volume Coastal Ocean Model (FVCOM). The model was validated against flume experiments, demonstrating its ability to accurately reflect velocity and density distributions from the near-bottom to the upper water column. Comparisons between the 3D rheological model and a 1DV model reveal significant differences, highlighting the critical role of horizontal apparent viscosity in simulating mud flow through complex geometries.

Introduction

Fluid mud is a high-concentration suspension of cohesive sediment commonly found in estuaries and river deltas. Unlike standard seawater, it is non-Newtonian, meaning its viscosity changes based on the shear rate. Historically, coastal models have treated fluid mud as a distinct layer or used 1DV approaches that only consider vertical shear. However, real-world estuaries involve complex lateral spreading where horizontal viscosity becomes significant. This paper addresses the lack of 3D rheological accounting in current hydrodynamic models, which often leads to inaccuracies in predicting how mud flows into wider basins or around complex coastal features.

Methodology

The authors built their model on FVCOM, which utilizes unstructured triangular grids to fit complex coastlines. The core innovation is the implementation of a 3D Herschel–Bulkley rheological model that incorporates the full 3D strain rate tensor. This allows the model to calculate apparent viscosity based on velocity gradients in all directions ($x, y,$ and $z$).

To handle depth variations, the model employs a $\sigma$ vertical coordinate system. This spatial organization supports a "continuous modeling approach," where the transition from clear water to dense mud is represented as a smooth gradient rather than a hard interface.

Spatial organization of the sigma vertical coordinate system.

For horizontal calculations, a second-order spatial reconstruction method is used for partial derivatives on the triangular grids. This ensures that horizontal shear forces—often ignored in simpler models—are accurately captured as the fluid mud spreads laterally.

Schematic diagram of spatial reconstruction for partial derivatives on triangular grids.

Validation and Results

The model was validated against two laboratory datasets: gravity currents on a slope (van Kessel and Kranenburg, 1996) and viscous propagation on a flat bottom (Chowdhury and Testik, 2012). In both cases, the model's predictions for the mud front position and vertical profiles of density and velocity matched experimental data with high precision.

A key insight was gained from a synthetic "Flume-Basin" test case. The 1DV model, which ignores horizontal shear, predicted a faster-moving mud front. In contrast, the 3D model showed a slower, more realistic propagation because it accounted for the energy lost to horizontal viscous forces as the mud entered the wider basin. The 3D model also produced a more realistic rounded "head" for the mud flow.

Conclusion

Integrating a 3D rheological model into a hydrodynamic framework like FVCOM significantly improves the accuracy of fluid mud simulations in complex coastal environments. By accounting for horizontal velocity shear and treating the water-mud system as a continuous fluid, the model avoids the instabilities of layered approaches. Future work will focus on incorporating turbulent flow models and sediment thixotropy to further refine predictions in dynamic estuarine settings.

Summary updated

Abstract

Modeling fluid mud in estuaries and coastal areas is a complicated task due to its non-Newtonian characteristics. A continuous modeling approach was adopted to investigate the laminar flow of fluid mud, with a three-dimensional (3D) form of the Herschel–Bulkley rheological model introduced into the finite volume coastal ocean model (FVCOM) to calculate the apparent viscosity of fluid mud. The model was validated against two flume experiments for the laminar flow of fluid mud. The results showed that the developed model was capable of accurately reflecting the continuous distribution of velocity and density from the near-bottom to the upper water column. Based on the validated model, the difference between the 3D rheological model and a 1DV rheological model on the simulation results was assessed. The study found the results of the 1DV model and the 3D model show obvious differences. This illustrates the significant effect of apparent viscosity in horizontal direction taken into account by the 3D rheological model.
BibTeX
@inproceedings{shi2024modelling,
  author = {Gaochuang Shi and Jinfeng Zhang and Qinghe Zhang and Zhao Zhangyi and Bing Yan and Hua Yang},
  title = {{Modelling of fluid mud flow based on a three-dimensional hydrodynamic model : incorporating a 3D rheological model}},
  booktitle = {Frontiers in Marine Science},
  year = {2024},
  doi = {10.3389/fmars.2023.1289605},
}

Loading related content...

Figure