Abstract
In this letter, a novel 3-D heterogeneous solenoid inductor with high inductance value is proposed. By adding planar spiral structures at the ends of through-silicon vias (TSVs) of a typical 3-D solenoid inductor, a heterogeneous solenoid is formed. The total inductance is increased by more than 41% compared with that of a typical solenoid inductor of the same size. Additionally, an accurate analytical model of the inductor is established, considering factors such as angle and offset. Q3D simulation results verified the accuracy of the model, with a percentage error of less than 5.38%. This work provides an important reference for inductor designers to quickly estimate inductance value, configuration, and layout area.
Introduction
As wireless communication systems continue to shrink, the demand for fully integrated radio frequency (RF) systems grows. A major bottleneck in this miniaturization is the inductor—a component critical for energy storage and filtering. Designers strive for high inductance and high quality (Q) factors within minimal surface areas. While 3-D solenoid inductors utilizing Through-Silicon Vias (TSVs) are popular for vertical integration, their inductance values are often constrained by the physical dimensions of the silicon substrate. This research addresses the need for a structure that offers significantly higher inductance without increasing the device's footprint.
Proposed Architecture and Methodology
The researchers propose a 3-D Heterogeneous Solenoid (HS) inductor. This hybrid architecture integrates three main components:
- Vertical TSVs: Serving as the vertical pillars of the solenoid.
- Redistribution Layer (RDL) Tracks: Horizontal metal lines on the top and bottom of the silicon connecting the TSVs.
- Planar Spirals: Small spiral structures added at the ends of the TSVs to capture horizontal magnetic flux.
By incorporating these spirals, the inductor generates horizontal magnetic flux in addition to the vertical flux of a standard solenoid. To support design efforts, a comprehensive analytical model was developed. This mathematical framework accounts for the self and mutual inductance of cylindrical TSVs, the geometric offsets and angles of RDL tracks, and the inductance of planar spirals using a "current sheet approximation" method. The model was validated using Ansys Q3D Extractor simulations across various parameters, including TSV height ($h_{TSV}$), pitch ($p_{TSV}$), and the number of turns ($N$).
Key Results and Validation
The HS inductor demonstrates a substantial performance boost over traditional designs. Key findings include:
- Inductance Increase: The proposed design achieved an inductance boost of more than 41% compared to a standard TSV solenoid of identical dimensions.
- Model Precision: The analytical formulas showed a percentage error of less than 5.38% when compared to high-fidelity Q3D simulations.
- Scalability: Inductance was found to increase linearly with TSV height and turn numbers, while following a parabolic curve relative to TSV spacing ($s_{TSV}$).
For a 3-turn configuration, a typical design yielded 1.46 nH, whereas the proposed HS design reached 2.06 nH, illustrating the practical impact of the added spiral structures.
Discussion and Future Work
The "Heterogeneous Solenoid" captures magnetic flux in multiple planes, maximizing the utility of the available volume. A significant practical advantage is the ability to fine-tune inductance values simply by adjusting the number of turns in the planar spirals, allowing for precise design iterations without altering the overall footprint or TSV arrangement. To mitigate parasitic capacitance, the spirals are arranged in an alternating pattern between the top and bottom layers.
While the current work focuses on inductance and modeling accuracy, future research should explore the Quality Factor (Q) and Self-Resonant Frequency (SRF) across broader frequency spectrums. Additionally, investigating the fabrication complexity and cost-effectiveness of mass-producing these multi-layered structures will be essential for their adoption in next-generation 6G technologies.
Summary updated