Modeling and Performance of the IEEE 802.11p Broadcasting for Intra-Platoon Communication

Hai Zhao, Chong Yu, Shuai-Zong Si, Hongye Guo, Hai Zhao 0002Sensors 2018 · DOI

TL;DR

This paper presents an analytical model for IEEE 802.11p broadcast communication within vehicle platoons, considering realistic factors like channel errors and unsaturated traffic. The model accurately predicts communication performance (delay and packet loss) and demonstrates that well-managed platoons can maintain stability even with communication imperfections.

What Problem Does This Paper Address?

Vehicle platooning, where cars travel closely together, promises increased road capacity, fuel efficiency, and safety. However, the stability of these platoons relies heavily on reliable and timely communication between vehicles, especially for safety-critical information. Existing research often simplifies communication models, neglecting real-world issues like packet loss due to channel errors or varying traffic loads. This paper addresses this gap by developing a more realistic analytical model for IEEE 802.11p broadcast communication within a single platoon, aiming to understand how these imperfections affect platoon stability.

Methods

The authors employ a multi-faceted approach:

  • Platoon and Vehicle Control Models: They establish models for platoon structure (leader, member, tail vehicles) and vehicle longitudinal dynamics, incorporating feedback control for stability.
  • Communication Model: The core of their work is modeling the IEEE 802.11p broadcast communication. This involves:
  • Back-off Process: Modeled using a 1-D Markov chain to capture channel contention and competition for access.
  • Queuing Process: Analyzed using M/G/1/K queuing theory to represent packet buffering and service.
  • Analytical Framework: They combine these models to derive analytical expressions for packet delay and packet dropping rate. Crucially, their model accounts for:
  • Imperfect Wireless Channels: Incorporating bit error rates.
  • Unsaturated Traffic Conditions: Vehicles don't always have data to send.
  • Platoon Size: The number of vehicles in the platoon.
  • Packet Generation Rate: How frequently new data arrives.
  • Simulation Verification: The analytical model is validated against simulations using the Veins framework, which integrates SUMO for mobility and OMNET++ for networking.

Datasets

Not discussed in the paper. The authors use simulated data based on parameters derived from the IEEE 802.11p standard and real-world traffic conditions.

Key Insights and Ideas

  • Realistic Modeling Matters: The paper highlights that neglecting channel errors and unsaturated traffic conditions leads to significant discrepancies between theoretical and actual communication performance in platoons. Their model's accuracy compared to previous work underscores this.
  • Bit Error Rate is Critical: Higher bit error rates directly lead to increased packet delay and significantly higher packet dropping rates, directly impacting platoon stability.
  • Packet Arrival Rate Trade-off: While higher packet arrival rates can improve responsiveness, they also increase delay and packet loss, especially as the network approaches saturation.
  • Platoon Size Limitation: Larger platoons experience diminishing returns in communication performance. The increased contention and buffer buildup lead to higher delays and packet loss, suggesting an optimal platoon size for stability.
  • IEEE 802.11p Suitability: Despite its limitations, the IEEE 802.11p broadcast mechanism, when modeled realistically, can still support the timely and reliable communication needed for platoon stability.

Key Results

  • The proposed analytical model shows excellent agreement with simulation results, outperforming previous models (Yang's and Hafeez's) that did not account for channel errors and unsaturated conditions.
  • Increasing the bit error rate from $1 \times 10^{-5}$ to $3 \times 10^{-4}$ can increase packet dropping rate by over 6 times for a platoon size of 10.
  • For a fixed platoon size, increasing the packet arrival rate (λ) leads to a rise in delay and packet dropping rate, with performance metrics rapidly increasing up to λ=100 before plateauing.
  • The simulation of a platoon under a sudden acceleration/deceleration maneuver demonstrated that despite communication delays and packet drops, the following vehicles could maintain string stability, with accelerations and spacing errors gradually declining upstream.

Limitations and Future Work

  • Interference Ignored: The simulation experiments did not account for interference from "free vehicles" (those not in a platoon), which would be present in real scenarios.
  • Intra-Platoon Focus: The study primarily focuses on intra-platoon communication, while inter-platoon communication's impact is not considered.
  • Future Work: The authors suggest extending their work to:
  • Develop relay-based multi-hop communication models for multi-platoon scenarios.
  • Investigate how inter-vehicle dynamic communication models influence platoon control algorithms.

Summary updated

BibTeX
@article{zhao2018modeling,
  author = {Hai Zhao and Chong Yu and Shuai-Zong Si and Hongye Guo and Hai Zhao},
  title = {{Modeling and Performance of the IEEE 802.11p Broadcasting for Intra-Platoon Communication}},
  journal = {Sensors},
  year = {2018},
  doi = {10.3390/s18092971},
}
Figure