Mirror development for CTA

A. Förster, M. Doro, P. Brun, R. Canestrari, P. M. Chadwick, L. Font, M. Ghigo, E. Lorenz, M. Mariotti, J. Michałowski, J. Niemiec, Giovanni Pareschi, B. Peyaud, Karol SewerynProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2009 · DOI

Abstract

The Cherenkov Telescope Array (CTA), currently in its early design phase, is a proposed new project for groundbased gamma-ray astronomy with at least 10 times higher sensitivity than current instruments. CTA is planned to consist of several tens of large Imaging Atmospheric Cherenkov Telescopes (IACTs) with a combined reflective surface of up to 10,000 m<sup>2</sup>. The challenge for the future CTA array is to develop lightweight and cost efficient mirrors with high production rates, good longterm durability and adequate optical properties. The technologies currently under investigation comprise different methods of carbon fibre/epoxy based substrates, sandwich concepts with cold-slumped surfaces made of thin float glass and different structural materials like aluminum honeycomb, glass foam or PU foam inside, and aluminum sandwich structures with either diamond milled surfaces or reflective foils. The current status of the mirror development for CTA will be summarized together with investigations on the improvement of the reflective surfaces and their protection against degradation.
BibTeX
@inproceedings{forster2009mirror,
  author = {A. Förster and M. Doro and P. Brun and R. Canestrari and P. M. Chadwick and L. Font and M. Ghigo and E. Lorenz and M. Mariotti and J. Michałowski and J. Niemiec and Giovanni Pareschi and B. Peyaud and Karol Seweryn},
  title = {{Mirror development for CTA}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2009},
  doi = {10.1117/12.827726},
}

Loading related content...

Figure