Minimum BER Receiver Filters with Block Memory for Uplink DS-CDMA Systems

Are Hjørungnes, Mérouane DebbahEURASIP J. Wirel. Commun. Netw 2008 · DOI

Abstract

The problem of synchronous multiuser receiver design in the case of direct-sequence single-antenna code division multiple access (DS-CDMA) uplink networks is studied over frequency selective fading channels. An exact expression for the bit error rate (BER) is derived in the case of BPSK signaling. Moreover, an algorithm is proposed for finding the finite impulse response (FIR) receiver filters with block memory such that the exact BER of the active users is minimized. Several properties of the minimum BER FIR filters with block memory are identified. The algorithm performance is found for scenarios with different channel qualities, spreading code lengths, receiver block memory size, near-far effects, and channel mismatch. For the BPSK constellation, the proposed FIR receiver structure with block memory has significant better BER with respect to and near-far resistance than the corresponding minimum mean square error (MMSE) filters with block memory.

Introduction: Moving Beyond MMSE

In modern wireless communication, Direct-Sequence Code Division Multiple Access (DS-CDMA) remains a foundational technology for allowing multiple users to share a common frequency band. However, the performance of these systems is often limited by Multiuser Interference (MUI) and Inter-Symbol Interference (ISI), particularly in frequency-selective fading environments where signal reflections cause temporal smearing of the unique spreading codes.

Traditionally, receiver design has relied on the Minimum Mean Square Error (MMSE) criterion. While MMSE is mathematically tractable and provides a reasonable proxy for performance, it does not directly minimize the metric that matters most to the end-user: the Bit Error Rate (BER). This paper addresses this gap by deriving an exact expression for the BER and proposing an optimization framework to design receivers that minimize it directly.

System Model

The study focuses on the uplink of a DS-CDMA network where $N$ users transmit signals to a central base station. Each user $i$ is assigned a unique spreading code $\mathbf{w}_i$ of length $M$. The signals pass through frequency-selective channels, modeled as FIR MIMO filters, before being combined at the receiver with additive white Gaussian noise (AWGN).

Overall system model for an N-user DS-CDMA uplink network.

As shown in the system model above, the received vector $\mathbf{y}(n)$ is a composite of signals from all active users, each distorted by their respective channel $\mathbf{C}_i(z)$. The challenge for the receiver is to untangle these overlapping signals to recover the original bits $s_i(n)$ with the lowest possible probability of error.

Receiver Design with Block Memory

A key innovation of this work is the use of FIR receiver filters with "block memory" of order $l$. Unlike memoryless receivers that process only the current block of received data, a receiver with block memory utilizes information from $l$ previous blocks. This expanded temporal window allows the filter to better compensate for the ISI introduced by the frequency-selective channel.

Structure of the proposed FIR receiver filter with block memory for user i.

The receiver for user $i$, denoted as $\mathbf{r}_i(z)$, processes the downsampled signal to produce an estimate $\hat{s}_i(n)$, which is then passed through a decision block (DEC). By increasing the memory order $l$, the receiver gains a "wider field of view," significantly improving its ability to suppress interference.

Optimization and Performance

The authors derive a closed-form expression for the exact BER under BPSK signaling. This expression is a complex sum of Gaussian Q-functions accounting for all possible bit combinations from all users. To minimize this non-linear function, a steepest-descent iterative algorithm is employed. The algorithm typically starts with the MMSE solution and iteratively adjusts the filter coefficients to find the local BER minimum.

Key Results

  • Massive SNR Gains: Simulations demonstrate that the Minimum BER (MBER) receiver significantly outperforms the MMSE receiver, especially as the signal-to-noise ratio (SNR) increases. In a 5-user scenario with a spreading factor of 7, the MBER receiver achieved a staggering 16.5 dB gain over MMSE at a target BER of $10^{-10}$.
  • Near-Far Resistance: The MBER approach is inherently more robust to the "near-far" effect, where high-power signals from nearby users can overwhelm weaker signals from distant users.
  • Memory Efficiency: The research indicates that most performance gains are realized by moving from a memoryless receiver ($l=0$) to one with a single block of memory ($l=1$). Further increases in $l$ yield diminishing returns, providing a clear path for balancing complexity and performance.

Conclusion

By shifting the focus from minimizing mean square error to directly minimizing the bit error rate, this paper provides a more optimal framework for DS-CDMA receiver design. The inclusion of block memory provides the necessary degrees of freedom to handle complex interference patterns in frequency-selective channels. While the computational complexity of the exact BER calculation scales with the number of users, the performance gains and robustness to channel mismatch make this a compelling approach for high-performance wireless systems.

Summary updated

BibTeX
@article{hjrungnes2008minimum,
  author = {Are Hjørungnes and Mérouane Debbah},
  title = {{Minimum BER Receiver Filters with Block Memory for Uplink DS-CDMA Systems}},
  journal = {EURASIP J. Wirel. Commun. Netw.},
  year = {2008},
  doi = {10.1155/2008/462710},
}

Loading related content...

Figure