Mid-IR super-continuum generation

Md. Nazrul Islam, Chenan Xia, Mike J. Freeman, Jeremiah Mauricio, Andy Zakel, Kevin Ke, Zhao Xu, Fred L. TerryProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2009 · DOI

TL;DR

Researchers have developed a powerful, all-fiber mid-infrared (mid-IR) supercontinuum laser source capable of generating a broad spectrum with high average power. This versatile laser has no moving parts and can be modulated, making it a promising tool for applications in defense, homeland security, and particularly in biomedical diagnostics and therapeutics, such as identifying and treating atherosclerotic plaque.

What Problem Does This Paper Address?

Generating broadband light in the mid-infrared (2.5-25 µm) is challenging but crucial for many applications, including chemical sensing, remote detection, and medical procedures like tissue ablation. Conventional mid-IR sources often rely on complex, bulky, and sometimes fragile systems like optical parametric amplifiers (OPAs), quantum cascade lasers, or synchrotron sources. These systems can have limitations such as moving parts, limited spectral coverage, or the need for specialized infrastructure. The authors aim to address this by developing a compact, robust, and high-power all-fiber supercontinuum (SC) laser that operates in the mid-IR, leveraging the advantages of fiber optics for improved stability and scalability. Specifically, they focus on extending the SC generation to longer wavelengths beyond the typical silica fiber limitations and achieving high average power.

Methods

The core of the system is an all-fiber-integrated laser that generates a supercontinuum by broadening the spectrum of a nanosecond pulse laser. The process begins with a 1542 nm distributed feedback (DFB) laser diode emitting nanosecond pulses (0.4-2 ns) at a variable repetition rate. These pulses are amplified through a multi-stage fiber amplifier system, including an erbium-doped fiber amplifier (EDFA) and cladding-pumped erbium/ytterbium co-doped fiber amplifiers (EYFAs).

The initial spectral broadening occurs in a short length of standard single-mode fiber (SMF) through modulation instability (MI), which breaks up the nanosecond pulses into shorter ones. This is followed by a longer segment of ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fluoride fiber, where further spectral broadening occurs via self-phase modulation, Raman scattering, and parametric four-wave mixing. ZBLAN fibers are chosen for their lower loss in the mid-IR compared to silica.

A key innovation is the demonstration of pulse pattern modulation. This is achieved by directly modulating the seed laser diode to create patterned pump pulses and by controlling the gain of the power amplifier using a feedback loop. This allows the SC output to be turned on and off, creating a modulated pulse train. The system also demonstrates scalability of the time-averaged output power by adjusting the repetition rate and pump power.

Datasets

Not discussed in the paper. The experiments involve generating and characterizing the output of their SC laser system.

Key Insights and Ideas

  • All-fiber mid-IR SC generation: The paper demonstrates a significant advancement in creating a high-power, all-fiber SC source that extends into the mid-IR, overcoming limitations of traditional silica fibers.
  • Scalable Power: The time-averaged output power of the SC laser is shown to be linearly scalable by adjusting the repetition rate and pump power, allowing for flexible power output.
  • Pulse Pattern Modulation: The ability to modulate the SC output (turn it on/off) without moving parts is a crucial development for applications requiring temporal control. This is achieved through direct modulation of the seed laser and amplifier gain control.
  • Biomedical Applications: The mid-IR SC's spectral characteristics are well-suited for applications like identifying and selectively ablating lipids and proteins, particularly in the context of atherosclerotic plaque, offering a potential non-invasive diagnostic and therapeutic tool.
  • Leveraging Mature Fiber Technology: The design utilizes commercially available fiber optic components and mature telecom technologies, suggesting a pathway for practical implementation and cost-effectiveness.

Key Results

  • Broad Spectrum: The SC laser generates a continuous spectrum from 0.8 µm to over 4.5 µm.
  • High Average Power: A time-averaged output power of up to 10.5 W was achieved, which is reported as the highest SC power in mid-IR fibers at the time of publication.
  • Power Scalability: The average SC power was demonstrated to be scalable from 1.4 W to 10.5 W by varying the repetition rate (0.42 MHz to 3.33 MHz) and pump power.
  • Pulse Modulation: The SC output can be modulated with a duty cycle adjustable from 0% to 100%, with switching times around 100-150 ns.
  • Biomedical Demonstration: Selective ablation of lipid-rich adipose tissue was demonstrated using the SC laser in the 3.2-3.6 µm range, targeting C-H vibrations, without significant damage to artery tissue at fluences as low as 15 mJ/mm².

Limitations and Future Work

  • Power Limitation: The current output power is limited by the available pump power diodes. Future work could involve adding more pump diodes to further increase the SC power.
  • Long Wavelength Extension: Extending the SC spectrum beyond ~5 µm would require using different types of fibers, such as tellurite fibers, which have lower loss in that region.
  • Modulation Speed: The authors suggest future work to increase the SC-off pulse repetition rate beyond 100 MHz to further reduce the peak power of mini-pulses and minimize nonlinear wavelength shifting during the off-time.
  • Efficiency Improvement: While the all-fiber configuration improved efficiency, further improvements in coupling efficiency between fibers and optimizing pump diode usage during modulated operation are suggested.
  • Clinical Deployment: The paper notes the potential for clinical deployment, implying that further development and validation would be needed for practical medical use.

Summary updated

Abstract

A Mid-InfraRed FIber Laser (MIRFIL) has been developed that generates super-continuum covering the spectral range from 0.8 to 4.5 microns with a time-averaged power as high as 10.5W. The MIRFIL is an all-fiber integrated laser with no moving parts and no mode-locked lasers that uses commercial off-the-shelf parts and leverages the mature telecom/fiber optics platform. The MIRFIL power can be easily scaled by changing the repetition rate and modifying the erbium-doped fiber amplifier. Some of the applications using the super-continuum laser will be described in defense, homeland security and healthcare. For example, the MIRFIL is being applied to a catheter-based medical diagnostic system to detect vulnerable plaque, which is responsible for most heart attacks resulting from hardening-of-the-arteries or atherosclerosis. More generally, the MIRFIL can be a platform for selective ablation of lipids without damaging normal protein or smooth muscle tissue.
BibTeX
@inproceedings{islam2009mid,
  author = {Md. Nazrul Islam and Chenan Xia and Mike J. Freeman and Jeremiah Mauricio and Andy Zakel and Kevin Ke and Zhao Xu and Fred L. Terry},
  title = {{Mid-IR super-continuum generation}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2009},
  doi = {10.1117/12.807206},
}
Figure