Microwave Absolute Distance Measurement Method with Ten-Micron-Level Accuracy and Meter-Level Range Based on Frequency Domain Interferometry

Longhuang Tang, Xing Jia, Heli Ma, Shenggang Liu, Yongchao Chen, Tianjiong Tao, Long Chen, Jian Wu, Chengjun Li, Xiang Wang, Jidong Weng2023 · DOI

TL;DR

This paper introduces a novel microwave absolute distance measurement method, Microwave Frequency Domain Interferometry (MFDI), that achieves ten-micron-level accuracy over meter-level ranges. By leveraging interference patterns in the frequency domain, MFDI offers a simpler, more robust, and potentially faster alternative to existing microwave ranging techniques, with applications in precision engineering and industrial monitoring.

What Problem Does This Paper Address?

Precise distance measurement is crucial for a wide range of applications, from manufacturing and assembly to target detection and deformation monitoring. While optical systems offer high precision, they are limited by environmental factors like poor visibility and short ranges. Microwave ranging techniques, on the other hand, offer advantages in penetration and range but often struggle to achieve both high accuracy (micrometer-level) and long ranges simultaneously, especially in complex environments. Existing methods like Continuous Wave (CW) interferometry have limited unambiguous ranges, while Ultra-Wideband (UWB) and Frequency Modulated Continuous Wave (FMCW) radar, despite advancements, often require complex algorithms, high-quality microwave sources, and can be slow, limiting their use for transient events. This paper aims to bridge this gap by proposing a microwave method that combines high precision, extended range, and potentially faster measurement capabilities.

Methods

The core of the proposed method is Microwave Frequency Domain Interferometry (MFDI). Unlike traditional FMCW radar that analyzes interference in the time domain after frequency sweeping, MFDI utilizes a broad-spectrum microwave source that emits all frequencies simultaneously. When this broad-spectrum signal is split into two paths (signal and reference) and then recombined, an interference phenomenon occurs in the frequency domain. The paper theoretically analyzes this phenomenon using coherence functions and power spectral density, showing that the interference fringes in the frequency domain are directly related to the time delay difference between the two paths. This time delay, in turn, is directly proportional to the absolute distance difference between the two paths. The key advantage is that the distance is determined by the period of these frequency domain fringes, which is inversely proportional to the time delay and independent of the absolute operating frequency. This allows for absolute distance measurement without the need for complex phase unwrapping or high-frequency sweeping. The system uses standard commercial microwave components, including a broad-spectrum noise generator, power dividers, amplifiers, a circulator, a horn antenna, and an electrical spectrum analyzer or a digitizer for data acquisition. For faster measurements, a digitizer combined with a Fourier transform analyzer is employed.

Datasets

Not discussed in the paper. The experiments were conducted using a controlled setup with a plane-parallel metal plate as the target, moved by a motorized translation stage.

Key Insights and Ideas

  • Frequency Domain Interference for Absolute Ranging: The fundamental insight is using the interference pattern in the frequency domain to directly determine absolute distance, bypassing the limitations of time-domain interferometry and FMCW phase unwrapping.
  • Frequency Independence for Accuracy: The accuracy of MFDI is primarily determined by the Fourier transform's ability to resolve the fringe period, not the carrier frequency itself. This offers flexibility in choosing operating frequencies.
  • Simplicity and Robustness: The method relies on a simple Fourier transform, reducing the need for complex phase estimation algorithms and making it less sensitive to signal-to-noise ratio (SNR) compared to other precision microwave techniques.
  • Potential for Ultrafast Measurement: Because the interference phenomenon is instantaneous in the frequency domain, MFDI holds promise for measuring transient events that occur on microsecond timescales, a significant improvement over the millisecond timescales of FMCW.

Key Results

  • Accuracy: The proof-of-concept experiments achieved standard deviations of 15 µm, 17 µm, and 26 µm at distances of 1.69 m, 2.69 m, and 3.75 m, respectively, demonstrating ten-micron-level accuracy.
  • Displacement Resolution: A displacement resolution of 100 µm was achieved with measurement errors less than ±12 µm.
  • Range: The method demonstrated meter-level ranging capabilities, up to 3.75 m in the experiments.
  • Multi-Target Recognition: The system successfully distinguished between two targets with a spacing of 7.38 cm, with a theoretical resolution limit of 5 cm based on the system's bandwidth.
  • Fast Measurement: A fast measurement mode using a digitizer achieved a single measurement time of 20 µs, a significant reduction from the ~1 second typically required by an electrical spectrum analyzer, with a slight decrease in accuracy (standard deviation of 96 µm).

Limitations and Future Work

  • Bandwidth Dependence: The accuracy and resolution are directly related to the operating bandwidth. While a few GHz bandwidth is sufficient for current accuracy, achieving sub-millimeter spacing resolution for multi-target scenarios would require bandwidths in the tens of GHz.
  • Environmental Scattering: Wider bandwidths can lead to increased environmental scattering noise, potentially affecting SNR.
  • Range Limit: The maximum measurable distance is limited by the frequency resolution of the acquisition equipment.
  • Future Work:
    • Quantitatively analyze the influence of operating bandwidth and SNR on accuracy and resolution.
  • Explore advanced signal processing algorithms (e.g., maximum likelihood estimation, MUSIC) for improved frequency estimation and thus higher accuracy.
  • Investigate the generation of broadband microwave/terahertz waves with arbitrary frequency band clipping using microwave photonics for expansion into higher frequency bands.
  • Further study the impact of multi-target resolution and explore its improvement.

Summary updated

BibTeX
@misc{tang2023microwave,
  author = {Longhuang Tang and Xing Jia and Heli Ma and Shenggang Liu and Yongchao Chen and Tianjiong Tao and Long Chen and Jian Wu and Chengjun Li and Xiang Wang and Jidong Weng},
  title = {{Microwave Absolute Distance Measurement Method with Ten-Micron-Level Accuracy and Meter-Level Range Based on Frequency Domain Interferometry}},
  year = {2023},
  doi = {10.3390/s23187898},
}

Loading related content...

Figure