Microheater hotspot engineering for repeatable multi-level switching in foundry-processed phase change silicon photonics

Carlos Rı́os, Hongyi Sun, Chuanyu Lian, Francis Vásquez-Aza, Sadra Rahimi Kari, Yi‐Siou Huang, Alessandro Restelli, Steven A. Vitale, Ichiro Takeuchi, Juejun Hu, Nathan Youngblood, Georges PavlidisResearch Square 2024 · DOI

Abstract

Nonvolatile photonic integrated circuits employing phase change materials have relied either on optical switching mechanisms with precise multi-level control but poor scalability or electrical switching with seamless integration and scalability but mostly limited to a binary response. Recent works have demonstrated electrical multi-level switching; however, they relied on the stochastic nucleation process to achieve partial crystallization with low demonstrated repeatability and cyclability. Here, we re-engineer waveguide-integrated microheaters to achieve precise spatial control of the temperature profile (i.e., hotspot) and, thus, switch deterministic areas of an embedded phase change material cell. We experimentally demonstrate this concept using a variety of foundry-processed doped-silicon microheaters on a silicon-on-insulator platform to trigger multi-step amorphization and reversible switching of Sb<sub>2</sub>Se<sub>3</sub> and Ge<sub>2</sub>Sb<sub>2</sub>Se<sub>4</sub>Te alloys. We further characterize the response of our microheaters using Transient Thermoreflectance Imaging. Our approach combines the deterministic control resulting from a spatially resolved glassy-crystalline distribution with the scalability of electro-thermal switching devices, thus paving the way to reliable multi-level switching towards robust reprogrammable phase-change photonic devices for analog processing and computing.

Introduction

Chalcogenide phase-change materials (PCMs) are critical for non-volatile photonics due to their significant refractive index changes. However, achieving repeatable multi-level or analog states—essential for advanced optical computing—remains a challenge. Current electrical switching typically yields binary responses or relies on stochastic nucleation, leading to poor repeatability. While optical switching offers better control, it lacks scalability. This work addresses these limitations by introducing a scalable, electrically driven system that enables deterministic multi-level states through microheater geometry engineering.

Methods and Design

The core innovation lies in the re-engineering of doped-silicon microheaters on a silicon-on-insulator (SOI) platform. The researchers evaluated three distinct geometries:

  • Type I (Bowtie): A standard design producing a flat temperature profile, suitable for binary switching.
  • Type II (Multi-bridge): Five identical silicon bridges providing spatial control via pulse energy modulation.
  • Type III (Varying-width Multi-bridge): Five bridges with widths ranging from 1 µm to 3 µm, creating a graded, "triangle-like" temperature profile with a central hotspot.
Comparison of Type I, II, and III microheater geometries and their simulated temperature profiles.

Validation involved Finite-Element Method (FEM) simulations for heat distribution and Transient Thermoreflectance Imaging (TTI) for real-time thermal mapping. Crucially, these devices were fabricated using both in-house and commercial CMOS foundry processes, ensuring industry compatibility.

Key Insights: Hotspot Engineering

The transition from temporal control of crystal growth to spatial control of the phase-change area is the pivotal shift. By engineering a graded temperature profile (Type III), the amorphous region expands predictably from the center as voltage increases, effectively bypassing stochasticity. Furthermore, the multi-bridge design leaves crystalline "seeds" between bridges, which significantly accelerates and stabilizes the recrystallization process compared to traditional bowtie heaters.

Experimental Results

The engineered microheaters demonstrated exceptional performance in terms of repeatability and control. Type II heaters achieved six distinct, repeatable levels over 25 full cycles, encompassing nearly 200 switching events. Type III heaters enabled "step amorphization," allowing the amorphous domain size to be precisely tuned between 2.7 µm and 8.5 µm.

Experimental validation showing (a) device micrograph, (b) repeatable multi-level phase shifts, and (c) transmission spectra across different states.

Integrated Mach-Zehnder Interferometers (MZIs) using these heaters showed a phase shift of approximately $\pi/5$ and an extinction ratio variation of ~20 dB. Thermal measurements confirmed rapid operation, with heaters reaching 80% of peak temperature in 800 ns, facilitating effective melt-quenching for amorphization.

Conclusion and Future Outlook

This study demonstrates that deterministic multi-level switching in PCMs is achievable through precise thermal hotspot engineering. While current designs are successful, future work will utilize topology optimization to refine heater shapes further. Additionally, efforts will focus on increasing phase shifts to full $\pi$ or $2\pi$ ranges and conducting long-term cyclability tests to meet industrial durability standards. This approach paves the way for robust, reprogrammable phase-change photonic devices in analog processing and computing.

Summary updated

Abstract

<title>Abstract</title> Nonvolatile photonic integrated circuits employing phase change materials have relied either on optical switching mechanisms with precise multi-level control but poor scalability or electrical switching with seamless integration and scalability but mostly limited to a binary response. Recent works have demonstrated electrical multi-level switching; however, they relied on the stochastic nucleation process to achieve partial crystallization with low demonstrated repeatability and cyclability. Here, we re-engineer waveguide-integrated microheaters to achieve precise spatial control of the temperature profile (i.e., hotspot) and, thus, switch deterministic areas of an embedded phase change material cell. We experimentally demonstrate this concept using a variety of foundry-processed doped-silicon microheaters on a silicon-on-insulator platform to trigger multi-step amorphization and reversible switching of Sb<sub>2</sub>Se<sub>3</sub> and Ge<sub>2</sub>Sb<sub>2</sub>Se<sub>4</sub>Te alloys. We further characterize the response of our microheaters using Transient Thermoreflectance Imaging. Our approach combines the deterministic control resulting from a spatially resolved glassy-crystalline distribution with the scalability of electro-thermal switching devices, thus paving the way to reliable multi-level switching towards robust reprogrammable phase-change photonic devices for analog processing and computing.
BibTeX
@inproceedings{ros2024microheater,
  author = {Carlos Rı́os and Hongyi Sun and Chuanyu Lian and Francis Vásquez-Aza and Sadra Rahimi Kari and Yi‐Siou Huang and Alessandro Restelli and Steven A. Vitale and Ichiro Takeuchi and Juejun Hu and Nathan Youngblood and Georges Pavlidis},
  title = {{Microheater hotspot engineering for repeatable multi-level switching in foundry-processed phase change silicon photonics}},
  booktitle = {Research Square},
  year = {2024},
  doi = {10.21203/rs.3.rs-4631376/v1},
}

Loading related content...

Figure