Microbial Corrosion Behavior of L245 Pipeline Steel in the Presence of Iron-Oxidizing Bacteria and Shewanella algae

Fanghui Zhu, Yiyang Liu, Chuan Wu, Kai Li, Yujin Hu, Yunguo Liu, Shuzhen Yu, Mingxing Li, Xiaohuan Dong, Haobo YuMicroorganisms 2025 · DOI

TL;DR

This study investigates how a combination of iron-oxidizing bacteria (IOB) and Shewanella algae (S. algae) accelerates the corrosion of L245 pipeline steel. The findings reveal that these microbes work together synergistically, with S. algae providing electron carriers that boost IOB's ability to degrade the steel, leading to significantly worse localized corrosion.

What Problem Does This Paper Address?

Microbiologically influenced corrosion (MIC) is a major cause of pipeline failures, leading to significant economic losses, particularly in oil and gas operations. L245 steel, a common material for pipelines, is susceptible to MIC. While the corrosion mechanisms of individual microbial species are somewhat understood, real-world environments often involve complex microbial communities. This paper addresses the gap in understanding how the combined presence of iron-oxidizing bacteria (IOB) and Shewanella algae (S. algae), two common microbes found in such environments, affects L245 steel corrosion, moving beyond single-species studies to a more realistic symbiotic scenario.

Methods

The researchers employed a multi-pronged approach to assess the corrosion behavior of L245 steel:

  • Corrosion Experiments: L245 steel samples were exposed to three conditions for 7 days at 38°C: monocultures of IOB, monocultures of S. algae, and a symbiotic mixture of both.
  • Weight Loss Method: This standard technique was used to quantify the uniform corrosion rate by measuring the mass loss of the steel samples before and after cleaning off corrosion products.
  • Surface Morphology Analysis:
    • Scanning Electron Microscopy (SEM): Used to visualize the biofilm formation and the surface morphology of the corroded steel.
  • Confocal Laser Scanning Microscopy (CLSM): Employed to measure the depth and morphology of pitting corrosion.
  • Electrochemical Techniques:
    • Open Circuit Potential (OCP) Measurements: Monitored over time to track changes in the corrosion tendency of the steel in different environments.
  • Potentiodynamic Polarization Curves: Used to determine corrosion potentials (Ecorr) and corrosion current densities (Icorr), providing insights into the kinetics of the corrosion process.
  • Electrochemical Impedance Spectroscopy (EIS): Applied to analyze the electrochemical behavior at the metal-electrolyte interface, providing information about resistance and capacitance related to corrosion product films and biomembranes. Equivalent circuit models were used to interpret the EIS data.

Datasets

Not discussed in the paper. The study utilized prepared bacterial cultures and L245 steel samples.

Key Insights and Ideas

  • Synergistic Corrosion Enhancement: The most striking finding is that the combination of IOB and S. algae leads to significantly worse localized corrosion (pitting) than either microbe alone. This highlights the critical importance of considering microbial consortia.
  • Electron Transfer Symbiosis: The mechanism behind this enhanced corrosion is a synergistic electron transfer. S. algae acts as an "electron shuttle," secreting electron carriers (like flavins) that IOB can utilize. This boosts IOB's ability to oxidize iron (Fe²⁺ to Fe³⁺), accelerating the overall corrosion process.
  • Divergent Trends in Corrosion Types: Interestingly, while localized corrosion (pitting) was dramatically amplified in the symbiotic system, the uniform corrosion rate was actually intermediate, falling between the rates observed for IOB alone and S. algae alone. This suggests different mechanisms dominate different types of corrosion.
  • Biofilm Maturation: SEM images showed that the symbiotic biofilm was more complete, dense, and mature than those formed by single species, indicating a more robust microbial community actively interacting with the steel surface.
  • IOB as the Primary Driver (for uniform corrosion): IOB alone caused a much higher uniform corrosion rate than S. algae alone, suggesting IOB is a more aggressive uniform corroder.

Key Results

  • Uniform Corrosion Rate:
    • S. algae: 0.02 mm/a
    • IOB: 0.25 mm/a (10x higher than S. algae)
    • S. algae + IOB: 0.11 mm/a (intermediate)
  • Maximum Pit Depth:
    • S. algae: 6.42 µm
    • IOB: 19.55 µm
    • S. algae + IOB: 26.96 µm (significantly higher than single species)
  • Corrosion Current Density (Icorr): The order of increasing corrosion tendency was S. algae < mixed strain < IOB.
  • EIS Analysis: The charge transfer resistance (Rct), inversely proportional to corrosion rate, was largest for S. algae, followed by the mixed strain, and smallest for IOB, reinforcing IOB's higher corrosion tendency.

Limitations and Future Work

  • Short-Term Study: The experiments were conducted over 7 days. Longer-term studies would provide a more comprehensive understanding of the corrosion evolution.
  • Nutrient Depletion: The authors suggest that in mixed-strain symbiotic conditions, nutrient depletion over time might lead to competition, suppressing metabolic activity and thus alleviating general corrosion. This aspect could be further explored.
  • Specific Microbial Strains: The study used specific strains of IOB and S. algae. Future work could investigate the effects of different strains or other microbial consortia found in oilfield environments.
  • Mitigation Strategies: The findings strongly imply the need for targeted mitigation strategies that address interspecies electron transfer and the synergistic effects of microbial communities, rather than just focusing on individual species. This could involve developing inhibitors or biofilm control methods that disrupt these symbiotic interactions.

Summary updated

Abstract

Microbiologically influenced corrosion (MIC) poses significant challenges in oilfield water injection environments, leading to substantial socioeconomic losses. L245 steel, a low-alloy steel widely used in oil and gas pipelines due to its excellent mechanical properties and cost-effectiveness, remains highly vulnerable to MIC during long-term service. This study uses surface characterization and electrochemical techniques to investigate the corrosion behavior of L245 pipeline steel under short-cycle conditions in a symbiotic environment of iron-oxidizing bacteria (IOB) and <i>Shewanella algae</i> (<i>S. algae</i>). Key findings revealed that localized corrosion of L245 steel was markedly exacerbated under coexisting IOB and <i>S. algae</i> conditions compared to monoculture systems. However, the uniform corrosion rate under symbiosis fell between the rates observed in the individual IOB and <i>S. algae</i> systems. Mechanistically, the enhanced corrosion under symbiotic conditions was attributed to the synergistic electron transfer interaction: IOB exploited electron carriers secreted by <i>S. algae</i> during extracellular electron transfer (EET), which amplified the microbial consortium's capacity to harvest electrons from the steel substrate. These results emphasize the critical role of interspecies electron exchange in accelerating localized degradation of carbon steel under complex microbial consortia, with implications for developing targeted mitigation strategies in industrial pipelines exposed to similar microbiological environments.
BibTeX
@inproceedings{zhu2025microbial,
  author = {Fanghui Zhu and Yiyang Liu and Chuan Wu and Kai Li and Yujin Hu and Yunguo Liu and Shuzhen Yu and Mingxing Li and Xiaohuan Dong and Haobo Yu},
  title = {{Microbial Corrosion Behavior of L245 Pipeline Steel in the Presence of Iron-Oxidizing Bacteria and Shewanella algae}},
  booktitle = {Microorganisms},
  year = {2025},
  doi = {10.3390/microorganisms13071476},
}
Figure