Micro-Porosity and gas emission characteristics of thermally contacted metamorphic coal by igneous intrusion

Xiang Fu, Hongda Liu, Huihui Sha, Wang Zhi-quan, Xuan LiuFrontiers in Earth Science 2023 · DOI

TL;DR

This study reveals that coal metamorphosed by igneous intrusions undergoes a dramatic structural shift, trading gas storage capacity (micropores) for high-speed transport pathways (macro/meso-pores). Because this coal releases gas violently in the first second of a leak, traditional safety indices like $\Delta p$ may underestimate the risk of deadly coal and gas outbursts, making the initial velocity index ($V_1$) a more reliable predictor.

What Problem Does This Paper Address?

In coal mining, "outbursts"—the sudden, violent release of coal and methane gas—are a major safety hazard. Geologically, when magma (igneous intrusion) pushes into coal seams, it subjects the coal to intense heat and pressure, creating "thermally contacted metamorphic coal."

The challenge is that this metamorphic coal behaves differently than normal coal. While it often contains less total gas, it can release what it has much more rapidly. Current mining safety standards often rely on the $\Delta p$ index (measuring gas emission between 10 and 60 seconds). However, researchers suspected that for metamorphic coal, the most dangerous activity happens in the first second. This paper aims to quantify the microscopic pore changes that drive this "fast-release" behavior to provide better guidance for disaster prevention.

Methods

The researchers collected five samples from the Daxing Coal Mine in China, ranging from "normal" coal (8 meters from an intrusion) to high-metamorphic coal (0.4 meters from an intrusion). They employed a multi-scale approach to characterize the coal:

  • Industrial Analysis: Measuring moisture, ash, and volatile matter to determine the degree of metamorphism.
  • SEM & PCAS: They used Scanning Electron Microscopy (SEM) to capture high-resolution images of the coal surface. These images were processed using the Pore-Fracture Analysis System (PCAS), a specialized software that identifies and quantifies pore area, perimeter, shape factors, and fractal dimensions.
  • Nitrogen Adsorption: Since SEM cannot easily see pores smaller than 5nm, they used low-temperature nitrogen adsorption to measure micropore volume and specific surface area.
  • Gas Emission Testing: Using a custom-built WT-1A apparatus, they measured the actual velocity of gas release over a 60-second window to correlate physical structure with gas behavior.

Datasets

The study utilized a primary dataset of 5 coal samples from the No. 9 coal seam of the Daxing Coal Mine. These samples represent a gradient of thermal metamorphism based on their distance from a gabbro intrusion. While the sample size is small, it provides a controlled look at how a single coal seam's properties evolve as it approaches an igneous heat source.

Key Insights and Ideas

  • The Porosity Flip: As coal gets closer to an intrusion, its "storage tanks" (micropores) shrink, but its "highways" (macro and meso-pores) expand. The total length of pores per unit area increases, and the pores become more interconnected.
  • Connectivity is Key: The researchers found that metamorphic coal has a higher "average shape factor." In this context, a higher shape factor indicates more complex, elongated, and interconnected pore networks, which significantly reduces the resistance gas faces when trying to escape.
  • The "First Second" Phenomenon: In high-metamorphic samples, 94% of the total gas emission occurred within the first second. This is a critical "aha" moment: if a safety test starts measuring at 10 seconds (like the standard $\Delta p$ test), it has already missed the most dangerous part of the event.
  • Mathematical Modeling: The authors established that the initial velocity ($V_1$) follows a quadratic nonlinear relationship with volatile content, while the attenuation coefficient ($\alpha$) follows a linear relationship.

Key Results

  • Structural Changes: Metamorphic coal showed a 31% increase in the total length of macropores and a 29% increase in mesopores compared to normal coal.
  • Adsorption Drop: The specific surface area of metamorphic coal was only 38.7% of that of normal coal, explaining why it holds less gas overall.
  • Emission Dynamics: The gas emission curve follows the power law $V_t = V_1 t^{-\alpha}$. Metamorphic coal exhibits a much higher $V_1$ (initial speed) and a higher $\alpha$ (faster decay).
  • Safety Index Superiority: The study concludes that the $V_1$ index is a far more reasonable characterization of outburst risk for metamorphic coal than the traditional $\Delta p$ index, which fails to capture the instantaneous nature of the gas release.

Limitations and Future Work

The authors acknowledge that while their microscopic analysis explains the rate of gas release, other factors like tectonic stress (physical pressure from the earth) also play a massive role in outbursts. This study focused primarily on the thermal effects of intrusions.

Future research could expand the sample size across different coal mines to validate the quadratic and linear models proposed. Additionally, integrating these microscopic pore characteristics into larger-scale numerical simulations of mine faces could help create real-time early warning systems for miners working near igneous intrusions.

Summary updated

Abstract

In order to quantitatively characterize the pore structure of thermally contacted metamorphic coal by igneous intrusion and investigate the intrinsic connection between the pore and dispersion properties of coal, the samples of metamorphic coal from different locations of Daxing Coal Mine were collected and processed. The correlative analysis on pore characteristics, including pore area, perimeter, shape factor and fractal dimension of pores with different sizes, were carried out by using scanning electron microscopy (SEM) and pore-fracture analysis system (PCAS). The results show that the porosity of macro- and meso-pores and the number of pores in the metamorphic coal are larger than those of the normal coal. The total length of pores per unit area and the average shape factor increase, and the connectivity of pore is raised, resulting in an enhanced gas release capacity (increased V 1 ) within the first one second. The proportion of gas emission in the first one second of metamorphic coal is much higher than that of other coals. The decrease of pore volume and specific surface area of micropores makes the adsorption capacity weaker, which results in a decrease in the total amount of emission - smaller Δp value, and earlier inflection point and faster attenuation on the emission curve, namely an increased α value. In addition, the V 1 , α value and volatile content satisfy the quadratic nonlinear and linear relationships, respectively. In the prediction of outburst risk of thermally contacted metamorphic coal, it is more reasonable to use the V 1 index to characterize the gas release rate.
BibTeX
@inproceedings{fu2023micro,
  author = {Xiang Fu and Hongda Liu and Huihui Sha and Wang Zhi-quan and Xuan Liu},
  title = {{Micro-Porosity and gas emission characteristics of thermally contacted metamorphic coal by igneous intrusion}},
  booktitle = {Frontiers in Earth Science},
  year = {2023},
  doi = {10.3389/feart.2022.1040147},
}

Loading related content...

Figure